CHINT/CHINT Terminal Block-SAK Series

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

DZ158LE-125□ residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two-wire, two-pole 230V, three-pole, three-pole four-wire, four-pole 400V rated current from 63A to 125A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action is broken.

NDT1 series warning light, with integrated multi-layer structure, is suitable for indication, warning, fault and other indication signals in telecommunications, electrical and other lines with AC 50Hz (or 60Hz), rated working voltage of 220V and below or DC working voltage of 24V and below. Wide range of applications ...

UVT-X1H undervoltage tripper is suitable for AC 50Hz, rated voltage 230V in the line, and NBH-63, NBH-40 series circuit breaker matching, when the tripper terminal voltage is reduced to the undervoltage protection range, the tripper action and drive the circuit breaker to automatically break, so as to achieve the undercurrent of the line...

POWGRID-M intelligent AC low-voltage complete set of equipment is a new generation of low-voltage switching system designed and developed by CHINT Low-voltage Intelligent Electrical Appliance Research Institute with completely independent intellectual property rights. It integrates many advantages of similar products at home and abroad, adopts standardized and modular design, and has the ability to measure the advantages of intelligent measurement.

NHH-125 disconnector is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 125A in the power distribution and control circuit, mainly as the main switch in the terminal combination appliances, can also be used to control all kinds of low-power electrical appliances and lighting, can be widely used in commercial and home and other places. ...

NP8 series button is suitable for AC 50Hz (60Hz), rated working voltage 415V and below or DC rated working voltage 250V and below in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for ...

Introduction: CHINT/CHINT AC contactor CJX1-9 is mainly used for AC 50Hz or 60Hz, the rated insulation voltage is 660V-1000V, and the rated working current is 9A-475A when the rated working voltage is 380V under the AC-3 use category, and is suitable for controlling AC electric ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NA1P series universal circuit breaker is suitable for AC 50Hz, rated working voltage to AC690V, rated working current to 6300A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single-phase grounding and other faults; The circuit breaker ...

The new NXC series of AC contactors is an innovative and compact design. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. ●Conform to the standard: GB/T 14048.1/IEC 6094 ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

LAY39 series button is suitable for AC 50Hz or 60Hz, rated working voltage 380V and below or DC working voltage 220V in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for light signal ...

TC is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage to 600V, and rated current to 600A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting. Standards: ...

NU6-II. series surge protector is suitable for AC 50Hz, rated voltage of single-phase 230V/three-phase 400V power distribution and control system, to meet the SPDII. level test, used to suppress the transient overvoltage below the equipment withstand impulse overvoltage, discharge surge energy, so as to protect the system circuit and equipment. Suitable...

Introduction: NSC1 series motion controller has 2 communication ports, 1 RS232, 1 RS485; Two or four single-phase high-speed pulse counting, up to 200KHz respectively, one or two AB phase high-speed pulse counting, up to 200KHz; External real-time clock chip is used to make the clock more accurate; ...

The NP3 series pushbutton is suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 380V, DC working voltage up to 220V. It is suitable for remote control of equipment in the open air, rain, snow and dust, such as cranes, electric hoists and other equipment. Standard: GB/T 14048. ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

OUVR-3 self-resettable over-under-voltage protector is a new type of intelligent protection electrical appliances, the product adopts modular standard design, when the power supply line has overvoltage and undervoltage, the protector can quickly and safely cut off the circuit under the continuous high-voltage impact, so as to avoid abnormal voltage sent to the terminal electrical appliances to cause ...

NB2LE residual current action circuit breaker is suitable for residual current protection, overload and short circuit protection in lines with AC 50/60Hz, rated voltage of 230V and rated current up to 40A. When the person is electrocuted or the leakage current of the circuit exceeds the specified value, the residual current action circuit breaker can be used in a very short ...