CHINT/CHINT DW15 series universal circuit breaker

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

NU5-I.+II. surge protective devices comply with GB/T 18802.11. It is suitable for AC 50Hz, rated voltage of single-phase 230V/ three-phase 400V power distribution and control system, meets SPD level I and II tests, and is used to suppress transient overvoltage lower than the equipment impulse resistance overvoltage, venting ...

Introduction: CJX1-K series AC vacuum contactor (hereinafter referred to as contactor), mainly used for AC 50Hz-60Hz, rated insulation voltage of 1000V, rated working voltage of 380V under the AC-3 use category of rated working current to 820A in the circuit, for long-distance connection and disconnection ...

The AX-5 auxiliary contact is suitable for AC 50Hz, the agreed heating current to 6A, the rated voltage to 415V or the DC rated voltage to 130V, and it is assembled with the NL1 residual current action circuit breaker for the signal indication of the long-distance circuit breaker. Conform to the standard: GB/T 14048.5, ...

NXMF series circuit breakers are suitable for AC 50/60Hz, rated working voltage to 690V, rated working current from 10A to 630A in the distribution network circuit, used to distribute power and protect lines and power equipment from overload, short circuit, undervoltage and other faults. At the same time, it can also be used as an electric motor ...

Introduction: CHINT/CHINT AC contactor NC1-09 (Z) (hereinafter referred to as contactor), mainly used for AC 50Hz (or 60Hz), rated working voltage to 690V, in AC-3, 400 (380) V use category rated working current to 95A in the circuit, for long-distance connection and breaking circuit ...

NBH-100□GQ series miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V or 400V, rated current to 100A line to play overload and short circuit protection. At the same time, as an over- and under-voltage protection circuit breaker, it can realize the automatic disconnection protection of over- and under-voltage, and automatically ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

NB8-63M single magnetic circuit breaker is mainly suitable for AC 50Hz, rated voltage to 415V, rated current to 63A in commercial office buildings, civil residential and general industrial use of terminal distribution lines, to provide short circuit protection for the line, but also under normal circumstances to the line infrequent conversion operation...

The main function of the AX-X1 auxiliary contact: it can be assembled with the circuit breaker to realize the signal indication of the on/off of the long-distance circuit breaker. Conform to the standard: GB/T14048.5, IEC60947-5-1 Parameters and performance Action characteristics: The wiring principle of the auxiliary contact is shown in Figure 1. When the auxiliary contact is opened, the 17th and 12th terminals ...

HZ12 series power cut-off switch is suitable for AC 50Hz or 60Hz, voltage to 550V circuit, as the power supply cut off and on. Comply with standards: GB/T 14048.3, IEC 60947-3. Ith A：40 Ui A：550 Ue V：380 Ie/A（AC-23A）： 40 ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.

NH3-100 disconnector (hereinafter referred to as the switch) is suitable for AC 50Hz, rated voltage to 230V or 400V, rated current to 100A in the resistance and inductance mixed circuit, mainly for no load to turn on or off the circuit, for the line and power supply to turn on or isolate. Especially suitable for line ...

Introduction: CHINT/CHINT Miniature Circuit Breaker NXB-40 is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters Forehead...

Introduction: CHINT/CHINT miniature circuit breaker NB8-63 miniature circuit breaker is mainly suitable for AC 50Hz, rated current to 63A in commercial office buildings, residential and general industrial terminal distribution lines, to provide overload, short circuit protection for the line, but also under normal circumstances...

NXAF series universal circuit breaker is suitable for AC 50/60Hz, rated working voltage to AC690V, rated working current to 4000A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single-phase grounding and other faults; The break ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 6 Output Type: Relay Maximum Inductive Load: 80V...

Introduction: CHINT/CHINT AC contactor CJX2 series (hereinafter referred to as contactor) is mainly used for AC 50Hz (or 60Hz), rated working voltage to 690V, in the AC-3, 400 (380) V use category rated working current to 95A circuit, for long-distance connection and breaking of circuits, frequency ...

DZ267LE-32 residual current action circuit breaker (hereinafter referred to as residual current circuit breaker) is mainly suitable for AC 50Hz, rated voltage 230V, rated current to 32A circuit, as a personal electric shock, equipment leakage protection, and overload, short circuit protection function, can also be used in the positive ...