What you need for an embedded IPC

Step 1 Check the production date of the industrial motherboard, and then check the use of the industrial motherboard, such as whether the wiring of the industrial motherboard is connected correctly; Whether the capacitors on the industrial board are bulging, whether the materials and parts are damaged, falling off, burning, etc. Step 2 Put the outside of the industrial motherboard ...

An industrial display is a display that uses industrial manipulation of a process or device. What makes it unique? The dustproof and shockproof special design uses an industrial-grade liquid crystal display. In higher-than-required cases, consider a wide temperature liquid crystal display. At present, there are only a handful of a few large foreign factories with higher ...

First of all, the biggest difference between industrial control motherboards and general PC boards is that there are more PCI slots on industrial motherboards, some of which are ISA slots. PC boards don't usually do this. Usually, industrial control motherboards do not have graphics cards. There is a PCI-E graphics slot on the computer motherboard. In addition to embedded ...

Downtime is a common fault of the industrial computer, and the ability to solve the downtime can ensure the high reliability and real-time function of the industrial computer. The following is an analysis of the common causes and solutions of industrial computer downtime. 1. Too much dust causes downtime ...

EVOC, as a leading provider of intelligent production and processing solutions in China, has played an important role in the completion of "China's Production 2025". EVOC focuses on intelligent production, and its IPC, MEC, PPC series products are widely used in various occupations of intelligent production, especially in 3C production.

1. It can be powered on but not lit 1. There is no alarm sound display of Didi when booted, maybe it is poor contact of memory oxidation or there is a problem with the memory itself, the solution is to wipe the memory with an eraser and reinsert it back after power-off, and replace the memory with its own problem.

Power products are widely used in industrial automation control, military equipment, scientific research equipment, industrial control equipment, computers and computers, communication equipment, power equipment, instrumentation, medical equipment, semiconductor refrigeration and heating, etc. If the IPC or motherboard has never been able to power on, you need to ...

One. How to use the case fan correctly --- importance of the direction of the case fan If you find that the fan is installed, the heat dissipation performance of the host is not improved or even becomes worse, it is likely that the direction of the fan is reversed.

Industrial control boards generally have BIOS chips, I/O control chips, keyboard and panel control switch interfaces, indicator adapters, expansion slots, DC power adapters for motherboards and cards, and other motherboards suitable for industrial occasions. It is selected by an industrial computer and can be operated in a wide temperature environment according to the needs of the industrial computer.

BIOS is the primary information reading direction when the IPC is started, if it is not set properly, the IPC will not be able to boot normally. When the IPC fails to start normally, it can complete the repair of unknown faults by restoring the BIOS factory settings. So how about the industrial motherboard BIOS...

The IPC is not set to start the call before leaving the factory, and to end the call self-start in use, you only need to set the BIOS of the IPC. BIOS is the abbreviation of "Basic Input Output System" in English, that is, "Basic Input and Output System".

1. After the IPC is turned on, the motherboard self-test is successful, but the system cannot be booted from the hard disk 1. Press the "Del" key to enter the CMOS hard disk parameter setting and boot order to see if the boot order is correct. 2. After booting with optical drive or floppy drive, check whether the hard disk of the industrial computer has a boot system or whether the hard disk is normal.

On November 8th, the 2017 (6th) Global Automation and Production Theme Summit, co-sponsored by the internationally renowned industrial media CONTROL ENGINEERING China and PLANT ENGINEERING China (referred to as CEC and PEC), was grandly held at Howard Johnson Kinguyuan Hotel in Shanghai.

With the increasing use of the network, preventing hackers from intrusion and malicious damage by competitors has become a key issue in the use of network security.

Memory is one of the most important components in industrial motherboards, which is mainly used to temporarily store the computing data in the CPU and the data exchanged by external memory. In the operation of industrial computers, there may be incompatibility between memory and industrial motherboards. The following is an introduction to the incompatibility of memory with industrial motherboards ...

1. With the improvement of hardware channel functions, the power consumption also increases. The weight of the heat dissipation system fixed on the CPU card will inevitably increase, resulting in an unstable center of gravity of the CPU card, which is easy to cause problems such as deformation, wire breakage, and poor touch of the CPU card, resulting in unstable work. ...

1. Hard disk speed The speed of the hard disk is one of the important parameters to identify the level of the hard disk, and it is one of the key factors of the internal transfer rate of the hard disk, which directly affects the speed of the hard disk to a large extent. The speed of the hard disk refers to the rotation speed of the motor shaft in the hard disk, which is the speed of the hard disk in 60 seconds.

The main categories of industrial computers are: IPC (PC bus industrial computer), PLC (programmable control system), DCS (loose control system), FCS (field bus system) and CNC (numerical control system). 1、IPC ...

An industrial computer is an automated device that can be used as a controller to operate reliably in an industrial environment. With the continuous development of industrial automation, industrial computers have been widely used in industrial automation, self-service terminals, medical equipment, rail transit, communications, finance, network security and other fields.

Compact PCI is transformed on the basis of PCI technology, and has the characteristics of openness, high reliability, and hot-swappability. Compact PCI industrial computer can build a high-availability system, suitable for communications, network, finance, rail transit, medical equipment, self-provoking...