Introduction: The BJX series of small photoelectric sensors have a high-performance lens with a detection distance of up to 30m. The sensor is also highly resistant to interference and has a low impact on ambient light**, allowing for accurate and reliable detection and presence. The anti-interference function allows multiple sensors to be installed in close proximity, and the MSR (Specular Suppression) function detects highly reflective targets.
Product Details
Detection Type: Thru-beam type
Detection distance: 15m
Detection object: Opaque object Min.Ø15mm
Light source: IR LED (850nm)
Response time: Max.1ms
Supply voltage: 10-30VDC ±10% (ripple P-P: max. 10%)
Current consumption: Luminaire/receiver: Max.20mA
Sensitivity Adjustment: Sensitivity Adjuster
Action Mode: Light ON/Dark ON (Switch Setting)
Control Output: PNP Open Collector
Connecting cable type: Ø4mm, 3-wire, 2m (Thru-beam illuminator: Ø4mm, 2-wire, 2m)
(AWG26, Core diameter: 0.52mm, Number of cores: 20, Outer diameter of insulating skin: Ø1mm)
Ambient Illuminance: Sunlight: Max.11,000lx, Incandescent Lamp: Max.3,000lx (Collecting Surface Illumination)
Ambient temperature: -25 to 60°C, storage: -40 to 70°C
Degree of protection: IP65 (IEC standard)
authentication
Ambient humidity: 35-85%RH, storage: 35-85%RH
Material
ᆞShell: PC
ᆞLED Cap: PC
ᆞLens, Lens Cover: PMMA
Weight: Approximately 145 g (approximately 95 g)
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Autonics Photoelectric Sensor BJX15M-TDT-P about 145g products, if you are interested in Autonics Photoelectric Sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Autonics BUP-30 U-shaped photoelectric sensor
BUP Series: The U-shaped photoelectric sensor BUP series is available in 30 mm and 50 mm sensing distance models with adjustable sensitivity, extending the flexibility of various applications.
Details:
Detection Type: Thru-beam type
Detection channel: 1 channel
Detection distance: 30mm
Detect: Opaque object Min ...
|
|
Autonics Photoelectric Sensor BR3M-MDT Specular Reflective Type
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics Photoelectric Sensor BUP-30 U-Type Ø4mm
Introduction: Reinforced plastic shell U-shaped photoelectric sensor BUP series, effectively prevent external light interference, improve detection performance, fast response speed (less than 1ms), through the mounting bracket can achieve multi-directional installation, increase the user's choice space.
...
|
|
Autonics/Autonics photoelectric sensor BJR100-DDT response 1ms
Introduction: The BJR series is an oil-resistant/oil-proof photoelectric sensor, which is suitable for various environments such as cutting oil and lubricating oil, such as the automotive and machine tool industries. The maximum detection distance is up to 15 m (through-beam type), and various functions such as M.S.R (mirror suppression) and anti-mutual interference are available to achieve stable and error-free ...
|
|
Autonics Photoelectric Sensor BH300-DDT 12-24VDC
Introduction: The BH series photoelectric sensors can be front-mounted with M18 fixing nuts and caps, or side-mounted with M3 bolts and nuts. Flexible mounting options allow for easy application in a variety of industrial environments. Sensors can be generated individually or in the same form with a simple wire configuration.
|
|
Autonics U-type photoelectric sensor BUM4-40D-W-4M
Introduction: BUM series U-shaped photoelectric sensor has 4 independent outputs, high-speed response time of less than 1ms, which can be used for highly reliable and stable state detection. Each output channel can be controlled independently and can be set up as multiple sensors. The BUM series offers excellent performance in moving parts inspection, ...
|
|
The Autonics/Autonics photoelectric sensor BA2M-DDT weighs approximately 50 g
Introduction: BA series diffuse reflective photoelectric sensors use specially designed optical components with a detection distance of up to 2 meters. The sensor can be used in both Light ON and Dark ON modes and comes with a built-in sensitivity adjuster. The action/stability indicator light allows the user to easily identify the operating status ...
|
|
Autonics Photoelectric Sensor BPS3M-TDT Ultra-Slim
Introduction: Autonics ultra-thin long-distance detection photoelectric sensor BPS series, flat design for easy installation, small size, detection distance up to 3m, to achieve IP67 protection level.
Features:
Flat square ...
|
|
Autonics photoelectric sensor BJ300-DDT weighs about 45g
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics Photoelectric Sensor BM1M-MDT Reflective Type
Introduction: BM series photoelectric sensors are easy to install and use in a variety of industrial applications. The sensor has built-in reverse power supply protection and a diffuse reflective version with a built-in sensitivity regulator. BM series photoelectric sensors have a variety of detection modes (through-beam type/specular type/diffuse type), ...
|
|
Autonics Photoelectric Sensor BTF15-BDTD BGS Reflective Type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
The Autonics/Autonics photoelectric sensor BC15-LDT-C has a response of 500μs
Introduction: The BC series of color scale sensors provide excellent color matching accuracy for highly reliable and stable color detection. The sensor uses a 12-bit RGB 3-color LED light source to determine the presence or absence of an object by comparing the set color with the detected color. Contains 2 detection modes, each with 3 ...
|
|
Autonics BTS series of ultra-miniature photoelectric sensors
Description: The BTS series of ultra-miniature photoelectric sensors is ideal for installation in limited spaces and compact applications. With a size of only 7.2 mm and a built-in amplifier, the sensor is capable of detecting tiny objects, including metal wires and semiconductor chips. The BTS series also adopts IP67 protective structure and stainless ...
|
|
Autonics/Autonics Pressure Sensor PSS-01V-R1/8 Compact
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics photoelectric sensor BTF30-DDTD diffuse reflective type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics Photoelectric Sensor BX700-DDT Diffuse Reflective Type
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. Built-in timer for ON delay, OFF delay and one-shot delay. Users can also switch between Light ON and Dark ON modes using the control cable, and sensitivity ...
|
|
Autonics/Autonics photoelectric sensor BJX3M-PDT-P detects 3m
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics/Autonics pressure sensor PSAN-V01CV-RC1/8
Introduction: The PSAN series of digital display pressure sensors can measure and display various types of pressure, including gases, liquids and oils. The automatic switching feature adjusts the pressure level to accommodate changes in the original pressure, providing a stable and accurate output. The sensor also has a variety of user-friendly ...
|
|
Autonics/Autonics Pressure Transducer PSS-C01V-R04
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics/Autonics photoelectric sensor BTF1M-TDTD detects 1m
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Contact
working hours
