Introduction: The PSAN series of digital display pressure sensors can measure and display various types of pressure, including gases, liquids and oils. The automatic switching feature adjusts the pressure level to accommodate changes in the original pressure, providing a stable and accurate output. The sensor also has a variety of user-friendly functions, including zero point adjustment, peak monitoring, and anti-vibration function.
Features:
Pressure measurement of any gas, liquid or oil
Except for substances that may corrode 316L stainless steel
Automatic switching function: Stable output can be maintained when the source pressure fluctuates
Only for models that include hold/auto-switch inputs
Hold Function: Hold the current display value or control the output
Forced output control mode for equipment testing and maintenance
One-button plug-in type, easy wiring maintenance
Zero point adjustment function, peak monitoring function, anti-vibration function
Product parameters
Applicable liquids: air, non-corrosive gases
Pressure connection direction: rear connection
Pressure connection: Rc1/8
Connection Cable Type: Pluggable Type (Pluggable Cable: 2m)
Pressure Type: Negative Pressure
Rated pressure range: 0.0——-101.3kPa
Displayed pressure units: kPa, kgf/cm², bar, psi, mmHg, inHg, mmH₂O
Control output _NPN: Open collector NPN open collector
Selectable Inputs/Outputs: Voltage (1-5VDC) outputs
Power supply voltage: 12-24VDC±10% (ripple P-P: Max.10%)
Current and Voltage: Output Type: Max. 50mA
Current: Output type: Max. 75mA
Degree of protection: IP40
Control Output_Hysteresis Value: Minimum display unit
Control Output_Repeatability: ±0.2% F.S. ± minimum display unit
Control output_response time: 2.5ms, 5ms, 100ms, 500ms, 1000ms selectable
Ambient temperature: -10-50°C, Storage: -20-60°C
Ambient humidity: 30-80%RH, storage: 30-80% RH
Material: Front, Rear Housing: PC, Pressure Connection: Nickel-plated brass
Weight: Approximately 165 g (approximately 80 g)
This article introduces the Autonics/Autonics pressure sensor PSAN-V01CV-RC1/8 weight about 67g product, if you are interested in Autonics/Autonics pressure sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Autonics photoelectric sensor BTF30-DDTD diffuse reflective type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics BJX3M-PDT-P photoelectric sensor
Product introduction: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing ...
|
|
Autonics Photoelectric Sensor BJR3M-PDT Red LED
Introduction: The BJR series is an oil-resistant/oil-proof photoelectric sensor, which is suitable for various environments such as cutting oil and lubricating oil, such as the automotive and machine tool industries. The maximum detection distance is up to 15 m (through-beam type), and various functions such as M.S.R (mirror suppression) and anti-mutual interference are available to achieve stable and error-free ...
|
|
Autonics Displacement Sensor BD-CRS 91g
Introduction: BD-C series communication converter is used for RS232C/RS485 communication of BD series laser displacement sensor. By connecting the sensor amplifier unit with a side connector, the communication converter can be powered. atDisplacement laser displacement sensor software allows users to switch without connecting ...
|
|
Autonics Photoelectric Sensor BR3M-MDT Specular Reflective Type
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics Photoelectric Sensor BJP100-BDT BGS Reflective Type
Introduction: The BJP series photoelectric sensors are optimized for printed circuit board (PCB) inspection with a 30 mm x 3 mm rectangular beam and background suppression (BGS) detection method. The sensor can be stably detected without being affected by holes, grooves, incomplete machining or protrusions on the PCB.
|
|
Autonics/Autonics multi-channel pressure sensor PSM series
Introduction: The PSM series multi-channel pressure indicators can display the measured values of up to 4 or 8 channels of analogue pressure sensors. When used in conjunction with our PSS series pressure sensors, the sensor type, pressure type and range can be automatically recognized without additional settings. Users can also ...
|
|
Autonics/Autonics photoelectric sensor BJ10M-TDT detects 10m
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics Pressure Sensor PSS-V01V-R1/8 weighs 60g
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics Photoelectric Sensor BJP100-BDT-P Reflective Type
Introduction: The BJP series photoelectric sensors are optimized for printed circuit board (PCB) inspection with a 30 mm x 3 mm rectangular beam and background suppression (BGS) detection method. The sensor can be stably detected and is not affected by holes, grooves, incomplete machining or protrusions on the PCB board. ...
|
|
Autonics photoelectric sensor BTF1M-TDTD-P ultra-low profile
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics photoelectric sensor BR20M-TDTD Ø15mm
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics Photoelectric Sensor BJ3M-PDT 12-24VDC
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics Photoelectric Sensor BM1M-MDT Reflective Type
Introduction: BM series photoelectric sensors are easy to install and use in a variety of industrial applications. The sensor has built-in reverse power supply protection and a diffuse reflective version with a built-in sensitivity regulator. BM series photoelectric sensors have a variety of detection modes (through-beam type/specular type/diffuse type), ...
|
|
Autonics Photoelectric Sensor BTF15-BDTD BGS Reflective Type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics displacement sensor BD-100 approx. 233g
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
Autonics/Autonics Pressure Sensor PSA-01-RC1/8 1-5VDC
Introduction: The PSA series of compact digital pressure sensors features high display resolution and fast response times for optimal performance. It also has a variety of output modes and features, making it ideal for a wide range of pressure-related applications. The bright LED display enables users to quickly and easily ...
|
|
Autonics/Autonics pressure sensor PSK2-C1CNV-R1/8
Introduction: Autonics/Autonics PSK2 series 2-segment display pressure transducer can display the current value (PV) and set value (SV) at the same time, and can also switch between red and green colors according to the setting and status. Not only can the setting status be displayed, but also the power-saving mode and fine-tuning function are provided to ...
|
|
Autonics photoelectric sensor BJX100-DDT-C-P 60g
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics/Autonics Displacement Sensor BD-065 Diffuse Reflectance
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|