Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. Built-in timer for ON delay, OFF delay and one-shot delay. The user can also switch between Light ON and Dark ON modes using the control cable, and a sensitivity adjuster is included for easy setup. The AC/DC general purpose type has a wide supply voltage range of 24-240 VAC / 24-240 VDC.
Features:
AC/DC universal model (relay contact output) is available
Output Type: Relay Contact (AC/DC Type), NPN/PNP Open Collector (DC Type)
Built-in sensitivity adjustment
Timekeeping mode selection (built-in timer): ON time-lapse, OFF time-lapse, One-shot time-lapse
Self-diagnosis function (green LED indicates stable operation)
Built-in reverse polarity protection circuit, output short circuit (overcurrent) protection circuit
IP66 protection (IEC standard)
Product parameters
Detection type: diffuse reflection type
Detection distance: 700mm
Detection: Opaque objects, translucent objects
Light source: IR LED (940nm)
Response time: Max.1ms
Power supply voltage: 12-24VDC±10% (ripple P-P: Max.10%)
Current consumption: Max.50mA
Sensitivity Adjustment: Sensitivity Adjuster
Action Mode: Light ON/Dark ON (Switch Setting)
Control output: NPN, PNP open collector output at the same time
Connection cable type: terminal block type
Environment: Illuminance: Sunlight: Max.11,000lx, Incandescent Lamp: Max.3,000lx (Receiving surface illumination)
Ambient temperature: -20-55°C, Storage: -25-70°C
Degree of protection: IP66
Ambient humidity: 35-85%RH, storage: 35-85%RH
Tolerance distance: 20% of the maximum detection distance
Material:
Housing, Lens cover: PC, Detection unit: Acrylic, Bracket: Cold heading steel plate,
Bolt: SCM, Nut: SCM
Weight: Approximately 116 g
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces Autonics/Autonics photoelectric sensor BX700-DDT diffuse reflective products, if you are interested in Autonics/Autonics photoelectric sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Autonics photoelectric sensor BJX100-DDT-C-P 60g
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autotonix/Autonics sensor PSK1-C01CP-R1/8 combined pressure
Introduction: The PSK1 series is a two-stage display pressure sensor that can display both the current value (PV) and the set value (SV). In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
Give birth...
|
|
Autonics/Autonics pressure sensor PSAN-V01CV-RC1/8
Introduction: The PSAN series of digital display pressure sensors can measure and display various types of pressure, including gases, liquids and oils. The automatic switching feature adjusts the pressure level to accommodate changes in the original pressure, providing a stable and accurate output. The sensor also has a variety of user-friendly ...
|
|
Autonics/Autonics photoelectric sensor BTF1M-TDTD detects 1m
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics/Autonics photoelectric sensor BYD3M-TDT through-beam type
Introduction: The BYD series of small amplifier built-in photoelectric sensors are extremely cost-effective, and their compact size and various detection methods (through-beam, diffuse, and limited distance reflection) make them ideal for a wide range of user applications. In addition, BYD30-DDT-you and BYD50-DDT-U...
|
|
Autonics/Photoelectric Sensor BEN3M-PDT Current 50mA
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. The user can also switch between Light ON and Dark ON modes using the control cable, and a sensitivity adjuster (except for thru-beam types) is included for easy setup. The use of dedicated IC to improve the anti-...
|
|
Autonics BUP-30 U-shaped photoelectric sensor
BUP Series: The U-shaped photoelectric sensor BUP series is available in 30 mm and 50 mm sensing distance models with adjustable sensitivity, extending the flexibility of various applications.
Details:
Detection Type: Thru-beam type
Detection channel: 1 channel
Detection distance: 30mm
Detect: Opaque object Min ...
|
|
Autonics Photoelectric Sensor BYD100-DDT 100mm
Introduction: The BYD series of small amplifier built-in photoelectric sensors are extremely cost-effective, and their compact size and various detection methods (through-beam, diffuse, and limited distance reflection) make them ideal for a wide range of user applications. In addition, BYD30-DDT-you and BYD50-DDT-U...
|
|
Autonics Photoelectric Sensor BH300-DDT 12-24VDC
Introduction: The BH series photoelectric sensors can be front-mounted with M18 fixing nuts and caps, or side-mounted with M3 bolts and nuts. Flexible mounting options allow for easy application in a variety of industrial environments. Sensors can be generated individually or in the same form with a simple wire configuration.
|
|
Autonics photoelectric sensor BJX10M-TDT-C-P 65g
Introduction: The BJX series of small photoelectric sensors have a high-performance lens with a detection distance of up to 30m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function allows close proximity to each other.
|
|
Autonics Photoelectric Sensor BPS3M-TDT Ultra-Slim
Introduction: Autonics ultra-thin long-distance detection photoelectric sensor BPS series, flat design for easy installation, small size, detection distance up to 3m, to achieve IP67 protection level.
Features:
Flat square ...
|
|
The Autonics/Autonics photoelectric sensor BA2M-DDT weighs approximately 50 g
Introduction: BA series diffuse reflective photoelectric sensors use specially designed optical components with a detection distance of up to 2 meters. The sensor can be used in both Light ON and Dark ON modes and comes with a built-in sensitivity adjuster. The action/stability indicator light allows the user to easily identify the operating status ...
|
|
Autonics Photoelectric Sensor BJP100-BDT-P Reflective Type
Introduction: The BJP series photoelectric sensors are optimized for printed circuit board (PCB) inspection with a 30 mm x 3 mm rectangular beam and background suppression (BGS) detection method. The sensor can be stably detected and is not affected by holes, grooves, incomplete machining or protrusions on the PCB board. ...
|
|
Autonics/Autonics photoelectric sensor BTF30-DDTL responds 1ms
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics/Autonics multi-channel pressure sensor PSM series
Introduction: The PSM series multi-channel pressure indicators can display the measured values of up to 4 or 8 channels of analogue pressure sensors. When used in conjunction with our PSS series pressure sensors, the sensor type, pressure type and range can be automatically recognized without additional settings. Users can also ...
|
|
Autonics/Autonics photoelectric sensor BS5-L1M-P through-beam type
Introduction: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation settings. The sensor is designed to minimize malfunction caused by foreign objects. The sensor has the highest visibility ...
|
|
Autonics Displacement Sensor BD-CRS 91g
Introduction: BD-C series communication converter is used for RS232C/RS485 communication of BD series laser displacement sensor. By connecting the sensor amplifier unit with a side connector, the communication converter can be powered. atDisplacement laser displacement sensor software allows users to switch without connecting ...
|
|
Autonics Photoelectric Sensor BUP-30 U-Type Ø4mm
Introduction: Reinforced plastic shell U-shaped photoelectric sensor BUP series, effectively prevent external light interference, improve detection performance, fast response speed (less than 1ms), through the mounting bracket can achieve multi-directional installation, increase the user's choice space.
...
|
|
Autonics/Autonics pressure sensor PSK2-C1CNV-R1/8
Introduction: Autonics/Autonics PSK2 series 2-segment display pressure transducer can display the current value (PV) and set value (SV) at the same time, and can also switch between red and green colors according to the setting and status. Not only can the setting status be displayed, but also the power-saving mode and fine-tuning function are provided to ...
|
|
Autonics photoelectric sensor BRQP400-DDTA is about 60 g
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Contact
working hours
