The problem often encountered in the use of Weiluntong touch screen - communication problems

1. Software editing-system parameter setting-HMI attributes-port number: 8000 change, such as 9000; 2. Bring up the computer task manager - end com_e30.exe under the process; 3. Restart the computer; 4. Query other occupancy on the computer through TCPview software.

The types of capacitive touch screens are divided into two types: surface capacitive touch screens and projected capacitive touch screens. Surface capacitive touch screen Commonly used is the surface capacitive touch screen, which has a simple working principle, low price, and simple circuit design, but it is difficult to achieve multi-touch. ...

When using the Weiluntong touch screen, how to set the IP address Examples: CMT2109X2 and CMT2079X First of all -> click on the little yellow button on the touch screen Secondly -> Click on the lock symbol Again-> Enter the password by default 111111 And then-〉 ...

cMT3151 can be stored in the form of data streaming, avoiding the SD card or USB when storing data due to falling off and unable to produce a complete storage record; At the same time, the abnormal operation of the machine is recorded, and the user is assisted in tracking and analyzing the source of the problem. cMT-iPC15 Built-in Error Correction Code (ECC) ...

1. The film surface of the touch screen is the touch surface, that is, the front of the product; The glass side is non-touch, i.e. the back of the product 2. The touch screen part is a glass product, the corners of the glass are sharp, please wear gloves/finger sleeves when assembling 3. The touch screen part is a fragile glass product, and it should not be touched during assembly.

1. Background color: Right-click on the blank space of the window, select Properties, Pop-up Settings, and select a color in the background; Hatch: In the background, tick the fill, select the pattern color and pattern. 2. Picture/Background Image: Select Picture Element ...

Ambient light factor, infrared receiver tube has a working range between minimum sensitivity and maximum illumination, but touch screen products can not limit the range of use, from the dark cabaret room to the outdoor use under the high-intensity sunlight on Hainan Island, as a product, it must adapt. Rapid detection ...

1、MT6102iQ 10.1" TFT display 1024*600 dots, brightness 350, contrast ratio 500:1, 16.7M color, 128MB memory, DC10.5-28VDC power supply, four-wire resistive type, USB Host USB2.0/Serial Interface (Con.A COM2 RS-485 2W/...

The Ethernet IP address and port number are set on the touch screen, such as 192.168.10.11, port number 102, and other parameters are set by default, that is, after setting the system parameters, you can edit the screen.

1) Check if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows 9x. The way to do this is to right-click on the desktop, select the "Properties" command, then select the "Screen Saver" tab from the dialog box, click the "Settings" button, and set the parameter to "...

1. High stability, not affected by time and environmental changes 2. Strong adaptability, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no intermediate medium, up to 100% 4. Screen and ...

With the promotion of Industry 4.0, human-machine interfaces are commonly found in various types of smart applications. Increasingly complex human-machine applications, from data collection and analysis to system monitoring, often require a large number of logical operations to be realized, which is time-consuming and difficult to maintain. 　　Wei Lun Tong ...

(1) The indicator light of the boot host is normal, but the monitor shows no signal input (black screen); (2) Press the on/off button, but the host has no response (the indicator light is not on, and the host cannot be heard to start); (3) The computer is restarted repeatedly, accompanied by crashes and blurred screens; (4) The screen is broken ...

First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the touch screen, and replace them in time if there are cracks. It is also necessary to check the surface of the touch screen for dirt and dirt.

1. DIP switch mode touch calibration and system initialization. For the full eMT series, MT8000i series, TK series, WT series and other HMIs, there is a set of reset buttons and DIP switches, which can trigger the corresponding functions when switching between different modes. If the HMI touches ...

1. When turning on and off the power of the machine, it should be operated in strict accordance with the regulations; 2. According to the severity of the environment, set a time limit to open the machine head to clean the reflective stripes and inner surface of the touch screen; 3. At present, the mainstream industrial display program does not have a mouse cursor, because the flashing of the cursor will ...

When the touch function of the touch screen fails, first try to enter offline mode to verify whether the touch screen backlight is burned out. If the cause of the fault is verified to be a burned-out backlight, then we can follow the steps below to temporarily restore the touch function of the touchscreen (take the Proface GP series touchscreen as an example below).

Check whether the connection interface is loose, and then check whether Serial Port and Interrupt Number conflict. If there is a conflict, adjust the resources to avoid the conflict. Then check the surface of the touch screen for cracks. If there is a crack, replace it in time. It is also necessary to check the touch screen table ...

When using touch screens, due to technical limitations and poor environmental adaptability, especially surface acoustic wave screens. The screen cannot be used normally due to water droplets, dust, etc., so touching the screen requires regular maintenance just like ordinary machines. And since the touch screen is much ...

1、eMT3120A 12.1" TFT display 1024*768 dots, brightness 500, contrast ratio 700:1, 16.2M color, 256MB memory, DC19.2-28.8VDC power supply, four-wire resistive, SD card slot, support SD/SDHC, USB Host USB 2.0 ...