Soft Touch/Rorobot Finger Module C3V5 Module width 18mm

Introduction: Rorobot Flange Connection Module FCM-S01, Flange Connection Module [FCM] is a connection between the end of the robotic arm and the sliding mounting plate [SMP], which can be used with the quick-change module [QCM], which is divided into spring rod type (S) and fixed rod type (R). Features: Compliant with IS...

Introduction: Rorobot B-3C12[H]/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into regular type [H] and non-marking type ...

Introduction: Rorobot Finger Module C4V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.

Introduction: Rorobot B-4B30[H]/S Features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D. Soft-touch materials are divided into ...

Introduction:Rorobot FM-C4V5/LS1[H] Product parameters Positive pressure stroke: 24.5mm Negative pressure stroke: 16mm Safe working air pressure: 300kPa Suggested load: 380g Tare weight: 90g Our customer-centric approach ...

Introduction: Rorobot Finger Module C6V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.

Introduction: Rorobot Finger Module C6V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle ...

Introduction:Rorobot Robot Soft Jaw BML-20201[HAS]/S,B-20005V/S can be well used for small, light and thin special-shaped workpieces between 0.18mm-3mm, even if it is close to the plane, it can also do pinching and grabbing, to ensure that the surface of the product is flawless. For light and small, blanking accuracy ...

Introduction: Rorobot BML-4H18[H]/S Features: The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D. The soft claw material is divided into conventional type [H and non-marking ...

Introduction: Soft-Touch/Rorobot Skid Shift Mounting Plate SMP-2L Features: It is divided into different styles according to the shape and length of the groove It can be used for assembly between the finger module [FM] and the flange connection module [FCM]. The mounting angle and position of the finger module [FM] can be adjusted freely ...

Introduction: Soft Touch/Rorobot Module B-20006/S, B-20006/S is a flexible claw with a small structure, especially suitable for strip and rod workpiece grabbing, which can realize wrapping grabbing, non-trace and non-destructive handling and sorting, to ensure that the product will not be scratched, and reduce the defect rate. When multiple soft jaws are connected in series, ...

Introduction: Soft-Touch/Rorobot Skid Shift Mounting Plate SMP-5S Features: It is divided into different styles according to the shape and length of the groove It can be used for assembly between the finger module [FM] and the flange connection module [FCM]. The mounting angle and position of the finger module [FM] can be adjusted freely ...

Introduction:Rorobot Robot Soft Jaw BML-1G364030[HAS]/M, is an enhanced version of the single finger soft jaw, the recommended fingertip and workpiece distance (19-28) mm, the recommended load of one finger soft jaw (0-500) G, the external gripping force (0-11) N. Features: Positive pressure ...

Introduction: Soft-Touch/Rorobot Soft-Touch Module Slip Mounting Plate SMP-15 Features: According to the length of the slot, it is divided into SMP-13 / SMP-14 / SMP-15 / SMP-16 It can be used for the assembly between the soft beak module, the connection combination [CM] and the aluminum profile The installation angle of the soft beak module and the ...

Introduction: Rorobot B-3C24[H]/S Features: The fingertips are opened in the positive pressure state, clamped in the vacuum state, and it is recommended to use it with a soft-touch air driver, and it supports the fingertip distance G and the external support finger distance D edible working air pressure adjustment. Soft-touch materials are divided into ...

Introduction:Rorobot BML-4BG64/S, B-4BG64/S is an external gripper type soft jaw, the recommended clamping workpiece size is (28-50) mm, the opening and closing size is (50.4-80) mm, suitable for grabbing steamed cakes, buns, siu mai and jujube cakes and other soft foods, B-4BG64/S is ...

Introduction: Rorobot Soft Jaw BMC-1G364030[HAS]/M, is a strengthened version of the single finger soft jaw, the recommended fingertip and workpiece distance is (19-28) mm, the recommended load of one finger soft jaw is (0-500) G, and the external gripping clamping force is (0-11) N. Features: Positive pressure state fingertips ...

Introduction: Rorobot Robot Soft Jaw BMC-1G071010[LP]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. The soft claw material is divided into ...

Introduction: Rorobot Finger Module FM-A8V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixation Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...

Introduction: Rorobot Air Driver iPCU 2, with two options: standard iPCU 2-SMN and high-speed iPCU 2-HMN, the high-speed type has a larger flow rate and faster response speed, and is suitable for high-speed handling conditions. Features: With 3 adjustable ...