The Rorobot Air Driver iPCU 2 is rated at 12W

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Air driver iPCU 2

Product Introduction
The Rorobot Air Driver iPCU 2 has 3 adjustable output pressure ranges and supports everything from soft beaks to enhanced fingers

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Rorobot Air Driver iPCU 2, with two options: standard iPCU 2-SMN and high-speed iPCU 2-HMN, the high-speed type has a larger flow rate and faster response speed, and is suitable for high-speed handling conditions.

The Rorobot Air Driver iPCU 2 is rated at 12W

Features:

With 3 adjustable output pressure ranges, it fully supports actuation from soft beaks to enhanced fingers.

Manual knob type pressure regulation.

The all-in-one panel integrates digital display and operation buttons.

It has two control modes: manual (button) and automatic (I/O level signal), and is equipped with various robotic arms and PLC terminals.

Equipped with mounting blocks and industrial rail card slots, a variety of installation methods.

IP54 electrical protection level, waterproof and dustproof, suitable for all kinds of harsh working conditions, with intelligent alarm function, safe, stable, no need to worry about misoperation, the product has passed the EU CE safety certification.

Product parameters

Voltage rating: 24 VDC ± 10%

Rated power: 12 W

Input air supply: 0.45-1.00 MPa, flow rate > 200 L/min

Output air pressure: -90-60kPa (low gear)

-90-120kPa (mid-range)

-90——300kPa (high-grade)

Degree of protection: IP54

Housing Material: ABS

Size: 207x132x141 mm

Net weight: 2.0 kg

Lifespan: 2.0 kg

Control mode: a. Manual buttons

b. I/O, level signal

Working mode: continuous signal drive

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the Rorobot Air Driver iPCU 2 product, if you are interested in the Rorobot Driver, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	SoftTouch/Rorobot Finger Module A3V5 Module height 58mm Introduction: Rorobot Finger Module A3V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping small, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
	Soft Touch/Rorobot Finger F-C3 Fingertip travel 10.5mm Introduction: Soft Touch/Rorobot Finger F-C3 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...
	Soft Touch/Rorobot Finger Module B3V3 Module width 25mm Introduction: Rorobot Finger Module B3V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted. Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
	Rorobot BMC-2G1211[HAS] Introduction:Rorobot Robot BMC-2G1211[HAS] Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G The soft claw material is divided into conventional type [H] ...
	Rorobot B-20005V Max load 30g Introduction: Rorobot B-20005V Features: Replaceable flexible chucks The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G It can be used as a clamp or external support Recommended for use with soft-touch actuators Products...
	SoftTouch/Rorobot Finger Module A8V4 Module length 148mm Introduction: Soft Touch/Rorobot Finger Module A8V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm. Product Features ...
	Rorobot FM-C5V5/LS1[P] 29g Introduction: Rorobot FM-C5V5/LS1 Features: Cooperate with the robotic arm to cope with the flexible production line of small and medium-sized batches and multiple batches in the factory, which can effectively save the production line switching time The maximum opening and closing speed of the soft tentacle claw is 300 times/min, and the highest repeatability is 0.05 ...
	SoftTouch/Rorobot Finger Module B5V5 Module height 51mm Introduction: Rorobot Finger Module B5V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
	Soft Touch/Rorobot Finger Module FM Finger Size L41×W24mm Introduction: Finger module FM is the action execution module of soft touch gripper, which is composed of two parts: finger F and fixed module, according to the air intake mode, installation position, combination method, select the appropriate finger fixed module. According to the weight and size of the workpiece to be clamped, the size of the required clamping force, ...
	Rorobot BMC-1G071010[LPAS]/S Introduction: Rorobot Robot Soft Jaw BMC-1G071010[LPAS]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. Soft claw material ...
	Rorobot B-3C24[H]/S Introduction: Rorobot B-3C24[H]/S Features: The fingertips are opened in the positive pressure state, clamped in the vacuum state, and it is recommended to use it with a soft-touch air driver, and it supports the fingertip distance G and the external support finger distance D edible working air pressure adjustment. Soft-touch materials are divided into ...
	Rorobot B-20606[P]/S The recommended load is 30g Introduction: Rorobot B-20606/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, and it is recommended to use it with a soft-touch air driver, and the fingertip distance G is supported to use the working air pressure adjustment. Soft-touch materials are divided into conventional type [H] and non-marking type, ...
	Rorobot BML-4B32[HAS]/S The recommended load is 50g Introduction: Rorobot Robot BML-4B32[HAS]/S Features: The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D. Soft claws ...
	Soft Touch/Rorobot Soft Jaw BMC-1G071010[PAS]/S Introduction: Rorobot BMC-1G071010/S Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G. The soft claw material is divided into conventional type and non-marking type ...
	FlexTouch/Rorobot Flange Connection Module FCM-R08 Introduction: Rorobot Flange Connection Module FCM-R08 Features: It conforms to ISO 9409-1:2004 standard (i.e. GB/T 14468.1-2006/) and is suitable for most robot flanges on the market. The maximum load is recommended 20 kg Suitable for non-standard clamps ...
	Rorobot BMC-1G071010[LP]/S The recommended load is 12g Introduction: Rorobot Robot Soft Jaw BMC-1G071010[LP]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. The soft claw material is divided into ...
	Rorobot B-4B weighs 6.4g Introduction: Rorobot Soft Beak B-4B Features: Replaceable flexible chucks The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G It can be used as a clamp or external support Recommended for use with soft-touch actuators Specifications ...
	Rorobot BML-1G071010[LP]/S The recommended load is 12g Introduction: Rorobot Robot BML-1G071010[LP]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. The soft claw material is divided into ...
	Soft Touch/Rorobot Robot Hand Claw F12B Pressure range -80~120kPa Introduction: The multi-finger opposite hand gripper has an extra gripping force, designed for heavy products, and the load can reach up to 5 times its own weight. It can be grasped vertically and horizontally in both directions, with strong adaptability, and can perfectly solve the problems of shaking and positioning deviation when grabbing hanging parts. Its soft material and adjustable grip force make it easy to ...
	Rorobot B-4B50[P]/S The recommended load is 500g Introduction: Rorobot B-4B50/S Features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D. Soft-touch materials are divided into conventional ...