Introduction:Rorobot Robot Soft Jaw BML-1G364030[HAS]/M, is an enhanced version of the single finger soft jaw, the recommended fingertip and workpiece distance (19-28) mm, the recommended load of one finger soft jaw (0-500) G, the external gripping force (0-11) N.
Features:
The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D.
When the workpiece is light in weight, or very soft, and it is easy to adhere to and adsorb on the soft claw when blanking, the non-marking material [HAS] should be preferred.
Product parameters
Repeat positioning accuracy: 0.05mm
Recommended load: 500g
Service life: 1,500,000 times
Safe working air pressure: 160kPa
Opening and closing frequency: 6 times/second
External grasping blessing force: 0-11N
BMC module weight: 177g
BML module weight: 181g Repeat positioning accuracy: 0.05mm
Recommended load: 500g
Service life: 1,500,000 times
Safe working air pressure: 160kPa
Opening and closing frequency: 6 times/second
External grasping blessing force: 0-11N
BMC module weight: 177g
BML module weight: 181g
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the BML-1G364030[H]/M products, if you are interested in Rorobot Robot Soft Jaw, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
柔触/Rorobot 手指模块FM-A5V1 模块长度109mm
简介:柔触/Rorobot 手指模块FM-A5V1,特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件,固定方式:可从三个方向固定.
产品特点
...
|
|
柔触/Rorobot 手指模块C3V3 手指宽度12mm
简介：柔触/Rorobot 手指模块C3V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。
产品特点
特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及 ...
|
![Soft Touch/Rorobot Soft JawBMC-4BG64[P]/S Opening and closing frequency: 6 times/second](https://www.76kj.cn/data/attachment/forum/202304/10/143121w7mmyf9eyqq11nei.jpg)
|
Soft Touch/Rorobot Soft JawBMC-4BG64[P]/S Opening and closing frequency: 6 times/second
Introduction:Rorobot soft claw BMC-4BG64/S, B-4BG64/S is an external gripper type soft claw, the recommended clamping workpiece size is (28-50) mm, the opening and closing size is (50.4-80) mm, suitable for grabbing steamed cakes, buns, siu mai and jujube cakes and other soft foods, B-4BG64/S is ...
|
|
柔触/Rorobot 手指模块FM-C6V2 手指宽度12mm
简介：柔触/Rorobot 手指模块FM-C6V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选)
...
|
|
柔触/Rorobot 手指模块FM-C7V2 手指高度14mm
简介：柔触/Rorobot 手指模块FM-C7V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选)
...
|
|
柔触/Rorobot 手指模块FM-A5V2 自重106g
简介：柔触/Rorobot 手指模块FM-A5V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) .
...
|
|
柔触/Rorobot 手指F-A3 指尖行程16.5mm
简介：柔触/Rorobot 手指F-A3
产品特点
指底花纹及指尖形状:会影响对工件的包覆效果以及摩擦力。
如需定制仿形指底花纹或指尖形状，请联系客服人员。
手指材质可选择常规型 ...
|
|
柔触/Rorobot 手指F-C7 负压行程29mm
简介：柔触/Rorobot 手指F-C7
产品特点
手指材质可选择常规型，增强型[H]以及防静电型[AS]。
增强型材质[H]拥有更高的工作压力范围,夹持力最高达到常规材质手指的300%。
防 ...
|
![柔触/Rorobot 柔爪B-20606[P]/S 建议负载30g](https://www.76kj.cn/data/attachment/forum/202207/21/163156miroi5522mii2gdd.jpg)
|
柔触/Rorobot 柔爪B-20606[P]/S 建议负载30g
简介：柔触/Rorobot 柔爪B-20606/S
产品特点
正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G使用工作气压调节。
柔触材质分为常规型[H]和无痕型， ...
|
![柔触/Rorobot 柔爪BMC-3B14[PAS]/S 建议负载12g](https://www.76kj.cn/data/attachment/forum/202303/22/163522vqdctifxupfigmk5.jpg)
|
柔触/Rorobot 柔爪BMC-3B14[PAS]/S 建议负载12g
简介：柔触/Rorobot 柔爪BMC-3B14/S
产品特点
正压状态指尖打开，负压状态夹紧，建议配合柔触空气驱动器使用，内撑指尖距D可使用工作气压调节。
柔爪材质分为常规型和无痕型，当 ...
|
![柔触/Rorobot 柔爪BMC-3A18[H]/S](https://www.76kj.cn/data/attachment/forum/202303/07/172725jteekb17jom9e9kb.jpg)
|
柔触/Rorobot 柔爪BMC-3A18[H]/S
简介：柔触/Rorobot 柔爪BMC-3A18[H]/S
产品特点
正压状态指尖打开，负压状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G以及外撑指尖距D可使用工作气压调节。
柔爪材质分为 ...
|
![柔触/Rorobot 柔爪BMC-2G1624[HBAS]/S 开合频率6次/秒](https://www.76kj.cn/data/attachment/forum/202301/10/165719pg7zb697rb8gxa0f.jpg)
|
柔触/Rorobot 柔爪BMC-2G1624[HBAS]/S 开合频率6次/秒
简介：柔触/Rorobot 柔爪BMC-2G1624[HBAS]/S
产品特点
真空状态夹紧，正压状态指尖打开，可由真空直接驱动
配合柔触空气驱动器使用(正负压切换驱动)可提升夹持工件尺寸
柔 ...
|
|
柔触/Rorobot 手指模块FM-C5V2 手指宽度12mm
简介：柔触/Rorobot 手指模块FM-C4V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选)
...
|
|
柔触/Rorobot 手指模块A6V5 正压行程39mm
简介：柔触/Rorobot 手指模块A6V5，特点及适用场景:模块更轻薄，安装模块指间距最小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
|
|
柔触/Rorobot 手指模块A4V5 模块宽度31mm
简介：柔触/Rorobot 手指模块A4V5，特点及适用场景:模块更轻薄，安装模块指间距最小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
|
![Rorobot BML-4H18[HAS]/S The recommended load is 15g](https://www.76kj.cn/data/attachment/forum/202212/23/160038d6q7aikxibqq336k.jpg)
|
Rorobot BML-4H18[HAS]/S The recommended load is 15g
Introduction: Rorobot BML-4H18[HAS]/S
Features:
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D.
The soft claw material is divided into conventional type [H and no ...
|
|
柔触/Rorobot 手指模块A3V4 手指高度28mm
简介：柔触/Rorobot 手指模块A3V4，特点及适用场景:夹持力较大，可串联(使用螺丝配件包PK)使用并简化气管布置。多用于多条手指同时工作且工件间紧凑的场景，工件宽度-般大于50mm。
产品特 ...
|
|
柔触/Rorobot 手指模块C8V4 手指宽度12mm
简介：柔触/Rorobot 手指模块C8V4，特点及适用场景:夹持力**大,可串联(使用螺丝配件包PK)使用并简化气管布置.多用于多条手指同时工作且工件间紧凑的场景,工件宽度一般大于50mm
产品特点
...
|
![柔触/Rorobot 柔爪BML-3C12[HAS]/S](https://www.76kj.cn/data/attachment/forum/202210/24/170444sdtzd5l1rpntr971.jpg)
|
柔触/Rorobot 柔爪BML-3C12[HAS]/S
简介：柔触/Rorobot 柔爪BML-3C12[HAS]/S
产品特点
正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距D可使用工作气压调节。
柔触材质分为常规型[H]和无 ...
|
|
柔触/Rorobot 独立手指模块SMP-02 槽宽4.2mm
简介：柔触/Rorobot 独立手指模块SMP-02
产品特点
按槽长度分为SMP-01 / SMP-02 / SMP-03
可用于手指模块[FM]与铝型材间的装配
手指模块[FM]的安装角度和位置可自由调节
...
|
|
Contact
working hours
![Rorobot BML-1G364030[HAS]/M The recommended load is 500g](https://www.76kj.cn/data/attachment/forum/202305/09/160232rttdttn4ddqti7b7.jpg)
![Rorobot BML-1G364030[HAS]/M The recommended load is 500g](https://www.76kj.cn/data/attachment/forum/202305/09/160242vlf5lfgtrp44l5fe.jpg)