Hardware Problems and Solutions of Kunlun Tongtai MCGS Touch Screen(91-95)

1. Every day before turning on the device, scrub the screen with a dry cloth. 2. If a drop of water or a drink falls on the screen, the software will stop the response, which is due to the fact that the water droplets and fingers have similar properties, and the water droplets need to be wiped off. 3. The touch screen controller can automatically judge the dust, but the dust is too ...

1. Embedded touch screen structure At present, the touch screen basically adopts an external structure, and the display module and the touch module of this structure are two relatively independent devices, and then the two devices are integrated through the back-end lamination process, but this relatively independent external structure will affect the ...

Accuracy: Accuracy can be defined as the maximum positioning error in a predefined touchscreen area, measured in the straight-line distance between the actual position of the finger and the measured position. When measuring accuracy, a simulated or mechanical finger is used. A finger placed on the panel ...

1) After the above touch calibration is completed, click [Enter Operating System] in the [Startup Properties] dialog box to enter the operating system; 2) Click [Start] --> [Settings] --> [Network & Dial-up Connection]; 3) Double-click [DM9000A] to bring up the corresponding dialog box, ...

The writing of the variable address of Kunlun Tongtai touch screen depends on the communication protocol and communication method used. In general, the variable address of the touch screen is communicated through the Modbus protocol, and the address can be written in the following ways: 1. For Modbus RTU communication mode, change ...

First of all, let's take a look at the interface settings of the Kunlun Tongtai touch screen. 1. Click on the device window to enter the Add PLC 2. First add a TCP parent serial port, and add a 5U device below 3. Double-click the TCP parent device to learn the settings, and enter the IP of the touch screen itself...

1. If the user is using a capacitive touch screen, it is recommended that the user first install the driver required for the capacitive touch screen correctly according to the requirements of the relevant manual, and then click "Start"/"Program"/"Micro ...

1. Prepare a USB flash drive of 8GB or less. Insert the USB port behind the touch screen, restart the touch screen, and quickly tap the progress bar when the process progress bar appears on the touch screen screen. 2. Click "System Maintenance". 3. Click Back up System Information. 4. Make sure the display path is us...

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

1. Check the terminal port First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the contact ...

1. Stuff preparation 1. 1 Phillips screwdriver; 2. 1 small slotted screwdriver; 3. 1 hair dryer; 4. Several transparent double-sided tapes. Second, the old screen is dismantled 1. Use a Phillips screwdriver to remove the 6 screws on the back cover and open the back cover. 2. ...

Problem Description: Why can't Kunlun touch screen TPC1061Ti communicate directly with S7-300MPI? Solution(s): 1. According to the Kunlun Tongtai and Siemens 300MPI direct connection sample, the communication status is 1, ask customer service, check line 3 8 PLC --7 8 ...

1. Open the Kunlun touch screen programming software and select the [press button] that needs to add a script in the window menu. 2. In the pop-up [Standard Button Widget Attribute Settings] window, select [Script] and click Open. 3. In the [Script] menu, select [Typing] ...

1. Tap the settings icon in the top right corner of the screen to enter the settings menu. 2. Find the "Time Settings" option in the menu and click to enter. 3. On the time settings screen, you can manually modify the current date and time. There is also the option to automatically get the time so that the device ...

1. To set the input area and output Q area of Kunlun Tongtai touch screen, you must first open the Kunlun Tongtai touch screen software, find the user window, and click to open. 2. Then select New Window to create two windows. 3. Click window 0 on the page that opens to enter the window. ...

Classification of capacitive touch screens Capacitive touch screens are divided into two categories, one is surface capacitive touch screen, and the other is projected capacitive touch screen, and projected capacitive can also be subdivided into self-capacitive and mutual capacitive. Among them, the surface capacitive and projected self-capacitive touch screen can only achieve ...

1. Failure regarding touch deviation If it is the position touched by the finger that does not coincide with the mouse arrow. Then you should install the driver and correct the position without touching the bullseye vertically. and re-correct the position. If some areas are touched accurately, some areas ...

The difference between capacitive screen and resistive screen is different in its working principle, touch technology, use environment, cost and life, and then I will explain it to you in detail: How it works Capacitive touch: works by using the body's current induction. When the finger touches on the metal layer ...

1. First of all, open the installed MCGS configuration software. 2. Next, click on the New Project menu under the Choose File menu. 3. Finally, under the type menu, select the touch screen model that matches the project and install it on the Kunlun Tongtai touch screen instrument. ...

The operating environment of Kunlun Tongtai TPC project was actively restarted If the CPU usage reaches 99% during project operation, the operating environment will be automatically exited and then started from the beginning. The reasons for high CPU usage may be: too many bitmaps, loops, etc.