KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series Flat BGS Reflective M8 Connector Type 30mm PR-FB30CP
specification
| Model | PR-FB30CP | | type | BGS reflection | | output | PNP | | shape | bracket | | Connection patterns | M8 connector: 4-pin | | Detection distance | 1 to 30 mm | | Control the number of outputs | 2 | | Output actions | Output 1 | ON when light is in | | Output 2 | ON when shading | | Response time | Output 1 | 0.5 ms | | Output 2 | ON → OFF：2.7ms、OFF → ON：0.5ms | | Sensitivity adjustment | N/A | | Spot diameter | Approx. ø5mm (at 30mm) | | light source | 4 Element Point Light Red LED (650nm) | | Prevent mutual interference function | 4 units | | Displays an indicator | Output Indicator (Orange), Steady Action Indicator (Green), Transmitted Transmitter: Power Indicator (Green) | | Control the output | 30 VDC or less, 50 mA or less | | Leakage current: | | 0.3 mA or less at 3 kΩ, 0.5 mA or less at 1 kΩ, 1.5 mA or less at 0.2 kΩ | | Residual Voltage: | | 1.0 V or less at 10 mA, 1.5 V or less at 10 to 30 mA, 2.0 V or less at 30 to 50 mA | | Protection circuits | Power supply reverse polarity protection, output overcurrent protection, output surge protection, power surge protection | | rated | Supply voltage | 10 to 30 VDC, including ripple (P-P) 10 % | | Current consumption | 19 mA | | Environmental resistance | Enclosure protection grade | IP67 (IEC60529)、IP69K (DIN40050-9)、4X、6P、13 (NEMA250) | | Insulation resistance | 20 MΩ or more (500 VDC) | | Ambient lighting | Incandescent lamp: 5,000 lx or less, Daylight: 20,000 lx or less | | Ambient temperature | -25 to +55 °C (no freezing) | | Store at ambient temperature | -25 to +75 °C | | relative humidity | 35 to 85 % RH (non-condensing) | | Withstand voltage | 1,000 VAC、50/60 Hz、1 min | | Earthquake resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in X, Y, Z directions | | Impact resistance | 6 times each in the 1,000 m/s2, X, Y, Z directions | | Material | Housing: SUS316L, Indicator Housing/Lens Cover: Polysulfone, Cable Protective Cover: Polymethylpentene, Filling Material: Polyester Series Resin | | fittings | Operator's manual | | weight | About 13 g |
This article introduces the KEYENCE/KEYENCE subminiature amplifier built-in photoelectric sensor PR-M/F SERIES PR-FB30CP products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
KEYENCE/KEYENCE laser sensor LR-TB2000CL/5000CL M12
Summary: The LR-T series offers a variety of innovative features to detect previously thought undetectable targets. These features allow the user to tailor the sensor to the specific application, ensuring excellent detection performance. The LR-T Series provides stable detection from a position that does not obstruct the operator, eliminating the need for manipulation.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-G5001
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-G5001
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-G5001 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, I ...
|
|
KEYENCE/KEYENCE Flow Sensor FD-M Series has a pressure resistance of 2.0 MPa
Introduction: KEYENCE/KEYENCE Flow Sensor FD-M Series The FD-M Series uses Faraday's law to determine the flow rate of conductive liquids. A typical electromagnetic flow sensor uses electrodes that are in contact with the liquid inside the test tube to detect the electromotive force of the liquid. The FD-M series is determined by electrostatic capacitance ...
|
|
KEYENCE/KEYENCE Metal Proximity Sensor ED Series Stand-Alone Type
Introduction: KEYENCE's ED series can detect all metals, the long-range proximity sensor can detect non-ferrous metals including aluminum, and has a built-in stable operation indicator.
Product parameters
Our customer-centric service concept: ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87444
Control panel Power cable (M8 4pin- loose wire) 5 m
Type: Control panel power cable
End Shape: M8 4pin - Loose wire
Length: 5 m
This article introduces the KEYENCE/KEYENCE Multi-Point Laser Sensor OP-87444 product.
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-1050
keyence KEYENCE CMOS Laser Displacement Sensor Amplifier Unit DIN Rail Mount Type IL-1050
Power supply voltage: Supplied by the main module*3
Power consumption: 2000 mW or less (67 mA or less at 30 V)
Pollution level: 2
Ambient temperature: -10 to +50 °C ( ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H058
Sensor head wide type laser class 3B LK-H058
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H058 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we look forward to your call, hope our technology ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H053
Sensor head Spot type laser class 3B LK-H053
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H053 product, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN12P
KEYENCE/KEYENCE Laser Sensor Amplifier Split Amplifier Cable Type Expansion Unit PNP LR-XN12P
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range shield is set during tuning. (The screen is not supported...)
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor Controller LK-H022K
Sensor head Spot Type LK-H022K
specification
This article introduces KEYENCE/KEYENCE CMOS laser displacement sensor controller LK-H022K products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope we ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-F51N3
KEYENCE's ultra-compact amplifier built-in photoelectric sensor PR-M/F Series Square Permeable Type Cable Type 0.6m PR-F51N3
This article introduces the KEYENCE/KEYENCE ultra-compact amplifier built-in photoelectric sensor PR-M/F Series PR-F51N3 products.
|
|
KEYENCE/KEYENCE digital laser sensor LV-N11CN
Amplifier M8 connector Main unit NPN LV-N11CN
Supply voltage: 24 VDC (operating voltage 10-30 VDC (including ripple)), ripple (P-P) 10 % or less, Class 2 or LPS*4*5
Ambient temperature: -20 to +55 °C (no freezing)*8
Relatively wet ...
|
|
KEYENCE/KEYENCE Split Proximity Sensor ES Series has a thickness of 3.5 mm
Description: The ES series is a proximity sensor with a separate amplifier with a detection distance of 8 mm shielded and 70 mm unshielded. The ES series can be installed without the need for precise adjustment of the sensor position. You can adjust the detection distance with the sensor after installation or during operation with the regulator ...
|
|
KEYENCE/KEYENCE CMOS Laser Displacement Sensor IL-065
KEYENCE CMOS Laser Displacement Sensor IL-065 Reference distance: 65 mm
Measuring distance: 55 to 105 mm
Bright spot range (at reference distance): approx. 550 × 1750 μm
Linearity: ±0.1% F.S. (55 to 75 mm)*2*3
Repeatability: 2 μm*4 ...
|
|
KEYENCE/KEYENCE Ultra-Small Amplifier Built-in Photoelectric Sensor PR-M/F Series PR-MB15N3
Mini Slim Reflective Type (Background Suppression) Cable Type 15mm PR-MB15N3
specification
This article introduces the KEYENCE/KEYENCE SUBMINIATURE AMPLIFIER built-in photoelectric sensor PR-M/F Series PR-MB15N3 products, if you are interested in KEYENCE/KEYENCE products, please contact ...
|
|
KEYENCE/KEYENCE Multi-Point Laser Sensor IX-055
IX-055 sensor head 55 mm
specification
*1 X: Laser long dimension direction, Y : Laser short dimension direction
*2 When facing each other at the base distance. Scanning mode: When measuring with a height tool, a small measuring point, and no position correction.
*3 Positive alignment at the reference distance
|
|
KEYENCE/KEYENCE amplifier built-in CMOS laser sensor LR-Z series LR-ZB250CP
Square Reflective M8 connector type 250mm
specification
*1 Reference display value related to detection distance. If the set value is tuned, the value will be displaced. Also, when "-99" is exceeded, the display will turn to "-FF".
*2 The FDA's (CDRH) laser classification is based on ...
|
|
KEYENCE/KEYENCE Sensor Head Spot Type LK-H052
Sensor head Spot type laser class 2 LK-H052
specification
This article introduces the KEYENCE/KEYENCE sensor head light spot type LK-H052 products, if you are interested in KEYENCE/KEYENCE products, please also contact our customer service, we are looking forward to your call, hope our ...
|
|
KEYENCE/KEYENCE Amplifier Unit NPN EX-V01
Control Inputs: NPN Open Collector or No Voltage Contact Input (Timing Input, Reset Input, Auto-Zero Input, Judgment Output Cancellation Input, Synchronous Input, External Set Input)
Control the output
Tolerance setting: Upper/lower limit 2-level setting × 4 styles ( optional ...
|
|
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P
KEYENCE/KEYENCE Laser Sensor LR-X Series LR-XN11P Laser Sensor Amplifier Split Amplifier Cable Type Main Unit PNP
*1 When 500 μs is selected, the following limits are specified.
· Tuning is limited to 2-point tuning.
· The detection range is set during tuning.
|
|
Contact
working hours
