Advantech's daily maintenance of the IPC and what to pay attention to in the process

Advantech's daily maintenance and maintenance of IPC:

1. Advantech industrial computer should first provide him with a relatively stable working environment when using it, so as to prevent frequent sensations in the process of use, otherwise it will affect its internal disk and hard disk, and simply form a serious wear and tear of the drive or damage to the hard disk, when installing Advantech industrial computer, it should be placed against the wall, but there should be a small amount of gap from the wall, so as to ensure the normal heat dissipation of the machine, otherwise the temperature of the machine will be too high and the internal components will accelerate aging.

2. During the daily maintenance of Advantech's industrial computer, its chassis is a major maintenance target, which is the time of household registration, including its industrial control power passive base plate and electric fan. In the normal use of the process, we should try to reduce the entry of dust to prevent dust from affecting the operation of the internal fan, otherwise there will be an instantaneous power failure, and a higher voltage often occurs when the machine is turned on instantaneously, and it is very likely that its internal components will be burned out. When the voltage supplied by its power supply is too high or too low, it will cause damage to the internal components, so it should be equipped with a relatively stable power supply, and the power supply should have the function of anti-static and lightning protection.

3. The passive base plate of Advantech industrial computer should also pay attention to maintenance and maintenance, this component can supply power to multiple cards such as sound card, graphics card, network card, etc., it should be paid attention to during maintenance, and the card can not be pulled out and inserted in the case of it is electrified, and the strength of the card should not be too large, the bottom plate should be cleaned with alcohol every once in a while, but it should be prevented from scratching during cleaning, and dust should not appear in the card slot of the bottom plate, otherwise there will be poor contact or short circuit. When maintaining the fan in the case, be sure to clean the external filter of the fan once a month to prevent excessive dust from entering the case, and to prevent sharp objects from damaging the blades of the fan, to ensure the normal operation of the fan.

4/ Advantech industrial computer maintenance, the motherboard is also a major maintenance target, in the usual use of the process of attention to pay attention to the memory and card board behind the mouse and keyboard, and live plugging will cause damage to the jack, affect his normal use, serious will lead to the motherboard directly scrapped, usually pay attention to the motherboard regular cleaning, but do not use alcohol or water when cleaning, should use a dry soft brush or vacuum cleaner to clean its appearance of dust. The hard disk of this kind of equipment can not be disassembled and assembled at will, and it is necessary to prevent sensation and kneading, especially when the hard disk is running, the power supply cannot be forcibly closed, which will lead to data loss.

5/ Advantech's hard disk, optical drive, floppy drive, etc. should be maintained frequently, and should always check whether there is toxic intrusion, and when there is an energy-saving function in the operating system, it should be used as reasonably as possible, as long as this can extend the service life of the hard disk, and when maintaining the optical drive and floppy drive, it is necessary to pay attention not to open its optical drive door at will, and not to use damaged or pirated optical discs to enter the optical drive and floppy drive, otherwise it will cause damage to the magnetic head and affect their normal reading function.

Advantech's daily maintenance of the IPC and what to pay attention to in the process

　　Advantech IPC needs to pay attention to in the maintenance of the following matters:

1. Optical drive: Do not open the optical drive door at will in use, do not use damaged and pirated discs, prevent dust from entering the optical drive, and do not sensationalize, distort or slap the optical drive during the use of the optical drive. The data cable should be connected smoothly to ensure that the optical drive is read smoothly.

2. Floppy drive: Do not put bad disks and toxic disks into the floppy drive, and do not use inferior and moldy floppy disks to prevent scratching the head. When the floppy drive is reading and writing to the disk (the floppy drive indicator light is on), do not forcibly remove the disk to prevent damage to the head or offset the head, resulting in the failure to read and write normally.

3. Hard disk: Do not disassemble the hard disk at will, prevent vibration and kneading, and try not to close the computer power supply when the hard disk is running, so that the sudden shutdown will cause damage to the hard disk track and data loss. Don't pull the jumper device on the hard drive. When transporting, be sure to pack it in an antistatic plastic bag or fix it with a shockproof material such as a sponge, and check for viruses often to prevent erosion. When there is an energy-saving function in the operating system, it should be used as reasonably as possible to extend the service life of the hard disk.

Advantech's daily maintenance of the IPC and what to pay attention to in the process

Sections viewed

Contact

working hours