EVOC IPC boot no display fault solution

Downtime is a common fault of the industrial computer, and the ability to solve the downtime can ensure the high reliability and real-time function of the industrial computer. The following is an analysis of the common causes and solutions of industrial computer downtime. 1. Too much dust causes downtime ...

Embedded accounting machines are ubiquitous in everyday equipment, office supplies, cars, industry, medical and agriculture. From calculators to telephones, cameras, elevators, traffic lights, plant controllers, and nuclear power plant control systems, there are physical embedded systems in virtually everything in modern equipment. These...

1. Hard disk speed The speed of the hard disk is one of the important parameters to identify the level of the hard disk, and it is one of the key factors of the internal transfer rate of the hard disk, which directly affects the speed of the hard disk to a large extent. The speed of the hard disk refers to the rotation speed of the motor shaft in the hard disk, which is the speed of the hard disk in 60 seconds.

The power supply of the industrial computer can be used universally with the general power supply, but it is better to add a UPS power supply when using it. Industrial Personal Computer (IPC) is an industrial control accounting machine, which is a kind of bus structure that ...

1. Chassis The chassis of the industrial computer has a power supply, a passive base plate, an electric fan, etc. Power supply: It is for long-hour uninterrupted operation, so the performance is better, it should be noted that the dust entry is reduced as much as possible, so as not to affect the operation of the fan. In addition, it should also be anti-static, lightning ...

Industrial computer virus refers to a set of instructions or program code that can affect the normal operation of the machine and reproduce itself through some unconventional means, which has several important characteristics of propagation, concealment, destruction and infection. What will happen to the virus in the industrial computer?

1. There is no display after the industrial computer is powered on 1. When the industrial computer is turned on, there is a connected alarm sound and the display does not appear, which may be poor memory oxidation contact or memory failure, and the memory is reinserted or replaced after power failure. If after replacing the memory, the IPC boots up and still has the alarm ...

1. The whole machine system is selected for EVOC EPE bus planning, and the CPCI pinhole connector is used for connection between the CPU board and the bottom plate, which is 360 degrees fully surrounded by touch, with high air tightness, anti-corrosion and anti-oxidation, dust-proof, etc., and handles the work in various industrial harsh environments such as dusty, wet, high/low temperature, corrosion, etc.

First of all, it is necessary to give EVOC industrial computer a stable working environment. If there is a sensation when the machine reads and writes to a disk or hard disk, the drive will be severely worn or damaged. If you want to place it against a wall, there should be at least a gap from the wall to ensure good heat dissipation.

USB is an external bus specification that is used to standardize the connection and communication between industrial computers and external devices. Generally speaking, when the external equipment of the industrial computer is connected to the USB interface of the industrial computer, it can be automatically recognized by the industrial computer, and can work normally.

On September 19, the 20th China International Industry Fair with the theme of "innovation, intelligence and green" was held in the National Convention and Exhibition Center (Shanghai). As a well-known enterprise in the field of industrial automation, EVOC brings four major professional solutions: intelligent manufacturing, artificial intelligence, Internet of Things, and rail transit.

Industrial motherboard is a motherboard used in industrial occasions, which is selected by industrial computers, and can adapt to wide temperature environments, harsh environments, and long-term high-load work according to needs. When choosing an industrial motherboard, you need to consider the following questions: Plate type ...

Memory is one of the most important components in industrial motherboards, which is mainly used to temporarily store the computing data in the CPU and the data exchanged by external memory. In the operation of industrial computers, there may be incompatibility between memory and industrial motherboards. The following is an introduction to the incompatibility of memory with industrial motherboards ...

The industrial control motherboard is an important part of the industrial computer, which can get used to the messy environment and long-term high-load work on the industrial site. The differences from commercial motherboards are: First, the materials and planning of components Commercial motherboards ...

With the modernization, high-tech and sophistication of electronic equipment, it is necessary to rely on an automatic testing system to complete the on-site rapid testing of electronic equipment. The radar automatic test system is based on the "PCI bus test software channel", aiming at the needs of the radar machine test.

PC (personal computer) is derived from IBM's first desktop computer type, PC, in 1978, which is a personal computer that can run independently and perform specific functions. Personal computers do not need to share resources such as processing, disks, and printers from other computers ...

A general-purpose server that is responsible for receiving, processing, and processing large amounts of data is of great importance to users. Through repeated optimization and multiple tests, we finally won the first battle, and EIS-2209-FT made its debut in the C position! 22 ...

Machine vision is a skill that uses computer and various sensor skills to complete the understanding and processing of drawings, videos, or other visual data. It is mainly composed of industrial cameras, light sources, industrial computers and corresponding picture analysis software systems. Machine vision is used in the manufacturing industry ...

Compact PCI is transformed on the basis of PCI technology, and has the characteristics of openness, high reliability, and hot-swappability. Compact PCI industrial computer can build a high-availability system, suitable for communications, network, finance, rail transit, medical equipment, self-provoking...

Machine vision is a comprehensive skill, which is mainly composed of industrial cameras, light sources, industrial computers and corresponding picture analysis software systems. Machine vision is like a single-function industrial robot, such as using a camera to obtain a picture of the object to be detected, and the special light source makes the detection policy ...