Maintenance and treatment methods of modern robot teach pendants in Korea

One. Daily inspection and maintenance 1. Wire feeding mechanism. Including whether the wire feeding force distance is normal, whether the wire feeding conduit is damaged, and whether there is an abnormal alarm. 2. Whether the gas flow rate is normal. 3. Whether the welding torch safety protection system is normal. (It is forbidden to close the welding torch safety protection work) 4. The water circulation system works ...

1. The setting of the welding joint of the spot welding robot: The solder joints of the spot welding robot are carried out in the teach pendant, which has multiple functions in the teach pendant, and the solder joints can be set according to the specifications of the workpiece to be welded and the reasonable teaching sequence.

1. Welding speed. Welding speed needs to match the welding quality, if the welding speed is too fast, it will affect the welding quality, easy to appear welding deviation, less welding, missing welding and other welding defects, the welding speed is too slow, it will affect the product production process, welding speed is an important indicator to determine the welding efficiency. ...

1. Stabilize and improve the welding quality to ensure its uniformity. When using robot welding, the welding parameters of each weld are constant, and the quality of the weld is less affected by human factors, which reduces the requirements for the operation technology of workers, so the welding quality is stable. And when manual welding ...

1. If the robot stops for some reason, hit both the robot and the operation box to the manual, then press the alarm reset on the operation box once or twice, then move the robot cursor to the alarm bar, and press all to confirm to reset the alarm, and then hit the teaching box to automatic, and then repeat the above step 6. ...

1. MIG welding (MIG/MAG arc welding): This welding method uses the continuously fed welding wire and the burning arc between the workpiece as a heat source, and the gas sprayed by the torch nozzle protects the arc for welding. The inert gas is generally argon. 2. TIG welding (inert ...

1. Improve the accessibility of welds. 2. It is particularly important to make the weld in the position of flat welding, especially when welding the weld of critical thickness. 3. When welding thin plates, the welding speed can be increased through displacement, and vertical welding can also be realized. 4. Machine ...

The use of mechanical automation production skills is a major change in the operation of the palletizing mechanism, which can not only bring huge benefits to enterprises, but also cheer for intelligent production and promote the rapid development of China's economy. In order to be able to adapt to changing product requirements regarding palletizing, ...

The robot welding adopts argon-rich mixed gas shielded welding, and the welding defects in the welding process generally include welding deviation, undercut, porosity, etc., which are analyzed as follows: (1) The welding deviation may be due to the incorrect position of the welding or the problem of finding the welding gun. At this time, consider T...

1. Simple operation and stable performance. Robot welding positioners are made according to the specific needs of different manufacturers, so the overall operation is also designed according to the habits of merchants. This kind of equipment is simpler to operate, more stable, stable in performance, and can also ensure ...

1) Scrub the axes of the robot; 2) Check the accuracy of TCP; 3) Check the oil level of the residue cleaned; 4) Check whether the zero position of each axis of the robot is accurate; 5) Clean the filter screen behind the water tank of the welding machine; 6) Clean the filter at the compressed air intake; ...

(1) Welding deviation problem: it may be that the welding position is incorrect or there is a problem when the welding gun is found. In this case, it is necessary to consider whether the TCP (welding torch center point position) is accurate and adjust it. If this situation occurs frequently, it is necessary to check the zero position of each axis of the robot and re-calibrate the zero ...

From November 7 to 11, 2017, the 19th China International Industry Fair was held in Shanghai. Hyundai Robot comprehensively demonstrated 11 kinds of products, including the correct arc welding system, high-speed spot welding system, and large-scale high-speed stamping and handling robot system. Among them, the LCD vacuum robot imported from Korea will ...

1. Choose to match their own production line, each manufacturer's production line speed and workpiece matching degree are different, users determine their own needs, what they want, what kind of manufacturer recommends what is suitable, and choose the right automatic argon arc welding robot to ensure the welding of solder joints.

1) Stabilize and improve the welding quality, and reflect the welding quality in the form of numerical values; 2) improve labor productivity; 3) Improve the labor intensity of workers and work in harmful environments; 4) reduce the requirements for workers' operation technology; 5) Shorten ...

Preparation of special welding processes Compile the special welding process for the welding robot, and carry out strict process regulations on the part size, weld groove and assembly size when programming. Generally, the dimensional tolerance of parts and grooves is controlled within ±0.8mm, and the assembly size error is controlled within ±1.5mm.

1. The personnel who need to repair the palletizing robot must be relevant personnel, at least those who often use the machine or have been trained and carefully read the machine manual; 2. Remove the filter of the air source triplet, empty the air source pipeline of the purge manufacturer, and then supply the air source; ...

Workstations (Units) If the workpiece does not need to be dislocated during the entire welding process, the workpiece can be positioned on the table with a fixture, which is the simplest system. However, in actual production, more workpieces need to be dislocated during welding, so that the weld is in a better position.

1. Turn on the machine. The operator turns on the power switch "ON" on the control cabinet and adjusts the operating mode to "TEACH" → "Teach-in mode". 2. Welding program editing. Enter the program editing state: first create a new program on the main menu, display the new program ...

1. Programming work: Technicians need to program the welding robot, construct the motion trajectory and welding torch attitude in the programming software, set the welding point according to the drawings of the workpiece, and input it into the control system after programming for operation. 2. Boot operation, ...