SoftTouch/Rorobot Finger Module C7V4 Module height 35mm

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Finger module C7V4

Product Introduction
Soft Touch/Rorobot Finger Module C7V4 Air intake: The intake connector is installed on the left or right side of the module (optional).

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Soft Touch/Rorobot Finger Module C7V4, Features and Applicable Scenarios: Large Clamping Force, Can Be Used in Series (Use Screw Accessory Kit PK) and Simplify the Trachea Arrangement. It is mostly used in scenarios where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm

SoftTouch/Rorobot Finger Module C7V4 Module height 35mm

Features:

Features and applicable scenarios: the clamping force is large, and it can be used in series (using screw accessory package PK) and simplifying the trachea arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm.

Fixing method: fixed by chute nut, and when installed with the sliding mounting plate (page.50), it can be adjusted to 3 degrees of freedom before and after, left and right and rotation.

Air intake mode: the air intake joint is installed on the left or right side of the module (optional).

Product parameters

Fingertip stroke: 63mm

Negative pressure stroke: 29mm

Positive pressure stroke: 34mm

Module height: 35mm

Finger height: 14mm

Module length: 78mm

Finger length: 49mm

Module width: 18mm

Finger width: 12mm

Tare weight: 38g

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the soft touch/Rorobot finger module C7V4 product, if you are interested in the soft touch/Rorobot finger module, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	Rorobot BMC-20603[H]/S The recommended load is 60g Introduction: Rorobot BMC-20603[H]/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into regular [H] and non-...
	Rorobot BMC-3B12[H]/S Introduction: Rorobot BMC-3B12[H]/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into conventional type [H] and non-marking ...
	Rorobot FM-A5V5/LS1[P] Introduction: Rorobot FM-A5V5/LS1 Features: Product parameters Positive pressure stroke: 24.5mm Negative pressure stroke: 19mm Safe working air pressure: 120kPa Recommended load: 280g Tare weight: 90g We take the guest ...
	Soft Touch/Rorobot Finger Module A3V4 Finger height 28mm Introduction: Rorobot Finger Module A3V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm. Product Features ...
	Rorobot BML-4B32[HAS]/S The recommended load is 50g Introduction: Rorobot Robot BML-4B32[HAS]/S Features: The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D. Soft claws ...
	Rorobot FM-A6V3/LS1[HAS] Introduction:Rorobot FM-A6V3/LS1[HAS] Product parameters Positive pressure stroke: 39mm Negative pressure stroke: 22mm Safe working air pressure: 300kPa Recommended load: 415g Tare weight: 98g We put our customers first...
	Rorobot B-20802[P] 20g recommended load Introduction: Rorobot B-20802 Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G. Soft touch materials are divided into conventional type and non-marking type.
	Rorobot FM-C4V5/LS1[H] Introduction:Rorobot FM-C4V5/LS1[H] Product parameters Positive pressure stroke: 24.5mm Negative pressure stroke: 16mm Safe working air pressure: 300kPa Suggested load: 380g Tare weight: 90g Our customer-centric approach ...
	Soft Touch/Rorobot Finger Module FMA3-V3 Finger width 24mm Introduction: Rorobot Finger Module FMA3-V3, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...
	Soft Touch/Rorobot Finger F-A6 weight 55g Introduction: Soft Touch/Rorobot Finger F-A6 Features: Finger pattern and fingertip shape: It will affect the coating effect and friction of the workpiece. If you need to customize the shape of the finger or fingertip, please contact customer service. Finger material can be selected conventional ...
	Rorobot BML-20606 [PAS] 30g load is recommended Introduction:Rorobot Soft Jaw BML-20606, Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G The soft claw material is divided into conventional type and non-marking type, when ...
	Soft Touch/Rorobot Finger Module B5V3 Finger width 18mm Introduction: Rorobot Finger Module B5V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted. Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
	Rorobot FM-C4V5/LS1[P] Introduction: Rorobot FM-C4V5/LS1 Product parameters Positive pressure stroke: 11mm Negative pressure stroke: 9mm Safe working air pressure: 120kPa Recommended load: 145g Tare weight: 28g Our customer-centric service philosophy ...
	Soft Touch/Rorobot Finger F-C7 Negative pressure stroke 29mm Introduction: Soft Touch/Rorobot Finger F-C7 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...
	Rorobot B-2B accuracy range 0.05mm Introduction: Rorobot Soft Beak B-2B 　　Features: Replaceable flexible chucks The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G It can be used as a clamp or external support Recommended for use with soft-touch actuators Product parameters ...
	Soft Touch/Rorobot Soft Jaws BMC-4BG64[PAS]/S The recommended load is 1500g Introduction:Rorobot soft claw BMC-4BG64/S, B-4BG64/S is an external gripper type soft claw, the recommended clamping workpiece size is (28-50) mm, the opening and closing size is (50.4-80) mm, suitable for grabbing steamed cakes, buns, siu mai and jujube cakes and other soft foods, B-4BG64/S is ...
	SoftTouch/Rorobot Finger Module A8V5 Module length 158mm Introduction: Rorobot Finger Module A8V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing between the mounting modules is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
	Soft Touch/Rorobot Soft Jaw BMC-3B18[P]/S Introduction: Rorobot BMC-3B18/S 　　Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into conventional type [H] and non-marking type [ ...
	Rorobot BML-4B32[H]/S Introduction: Rorobot Robot Soft Jaw BML-4B32[H]/S Features: The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D. Soft claw ...
	Soft Touch/Rorobot Finger Module C8V5 Module width 18mm Introduction: Rorobot Finger Module C8V5, Features and Applicable Scenarios: The module is thinner, and the minimum finger spacing of the installation module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.