Introduction: Rorobot Finger Module A8V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing between the mounting modules is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but each finger needs to be supplied independently compared to the V4.
Features:
Features and applicable scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping small, light and thin workpieces. It can also be used in series (using the screw kit PK), but each finger needs to be supplied independently compared to the V4.
Fixing method: It is fixed with a chute nut, and when it is installed with the sliding mounting plate (page.50), it can be adjusted to three degrees of freedom of front and back, left and right and rotation.
Air intake method: The air intake connector can only be installed in one direction (outside of the finger)
Product parameters
Fingertip stroke: 109mm
Negative pressure stroke: 45mm
Positive pressure stroke: 64mm
Module height: 58mm
Finger height: 28mm
Module length: 158mm
Finger length: 111mm
Module width: 31mm
Finger width: 24mm
Tare weight: 111g
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the A8V5 product of Rorobot Finger Module, if you are interested in Routouch/Rorobot Finger Module, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
![Soft Touch/Rorobot Soft JawBMC-4BG64[P]/S Opening and closing frequency: 6 times/second](https://www.76kj.cn/data/attachment/forum/202304/10/143121w7mmyf9eyqq11nei.jpg)
|
Soft Touch/Rorobot Soft JawBMC-4BG64[P]/S Opening and closing frequency: 6 times/second
Introduction:Rorobot soft claw BMC-4BG64/S, B-4BG64/S is an external gripper type soft claw, the recommended clamping workpiece size is (28-50) mm, the opening and closing size is (50.4-80) mm, suitable for grabbing steamed cakes, buns, siu mai and jujube cakes and other soft foods, B-4BG64/S is ...
|
![Rorobot BMC-3A18[HAS]/S The recommended load is 30g](https://www.76kj.cn/data/attachment/forum/202303/10/162407akbb9huce7hzkbdw.jpg)
|
Rorobot BMC-3A18[HAS]/S The recommended load is 30g
Introduction: Rorobot soft jaw BMC-3A18 [HAS]/S, soft jaw material is divided into conventional type [H] and non-marking type [HAS]
Features:
The fingertips are open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with a soft-touch air driver, and the fingertip distance of the clamping fingertip G and the external support fingertip distance is D...
|
|
SoftTouch/Rorobot Finger Module A7V4 Module length 134mm
Introduction: Rorobot Finger Module A7V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm.
Product Features ...
|
|
SoftTouch/Rorobot Finger Module FM-A5V1 Module length 109mm
Introduction: Rorobot Finger Module FM-A5V1, Features and Applicable Scenarios: Combination of two-finger modules, compact structure, small footprint. The spacing and installation angle are not adjustable, suitable for clamping tiny, thin and light workpieces, and the fixing method: can be fixed from three directions.
Features:
...
|
|
Soft Touch/Rorobot Finger Module FM-C3V2 Negative pressure stroke 5mm
Introduction: Rorobot Finger Module FM-C3V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixation Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
![Soft Touch/Rorobot Soft Jaw BMC-1G071010[PAS]/S](https://www.76kj.cn/data/attachment/forum/202302/13/160210mwczdal1zlndfnlf.jpg)
|
Soft Touch/Rorobot Soft Jaw BMC-1G071010[PAS]/S
Introduction: Rorobot BMC-1G071010/S
Features:
The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G.
The soft claw material is divided into conventional type and non-marking type ...
|
![Rorobot B-3B10[H]/S](https://www.76kj.cn/data/attachment/forum/202208/04/154957m51i9e89wz27xuru.jpg)
|
Rorobot B-3B10[H]/S
Introduction: Rorobot B-3B10[H]/S
Features:
The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D.
Soft-touch materials are divided into regular [H] and ...
|
![Rorobot BMC-4B32[HAS]/S](https://www.76kj.cn/data/attachment/forum/202306/02/161859gjtjnnicuz3u0nna.jpg)
|
Rorobot BMC-4B32[HAS]/S
Introduction: Rorobot Robot BMC-4B32[HAS]/S
Features:
The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D.
Soft claws ...
|
|
Soft Touch/Rorobot Finger Module B7V3 Finger length 73mm
Introduction: Rorobot Finger Module B7V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
|
|
Soft Touch/Rorobot Finger Module FM-A6V2 Finger length 83mm
Introduction: Rorobot Finger Module FM-A6V2, Features and Applicable Scenarios: Independent Installation, Can be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixation Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
|
Soft Touch/Rorobot Finger Module FM-C4V2 Module Length 51mm
Introduction: Rorobot Finger Module FM-C4V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixation: Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
|
Soft Touch/Rorobot Finger Module FMA6-V3 Finger length 83mm
Introduction: Rorobot Finger Module FMA6-V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing ...
|
|
SoftTouch/Rorobot Finger Module FM-B5V2 Module width 25mm
Introduction: Rorobot Finger Module FM-B5V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
![Rorobot BMC-3B12[H]/S](https://www.76kj.cn/data/attachment/forum/202210/12/160347uzxzapcqyvtvncvs.jpg)
|
Rorobot BMC-3B12[H]/S
Introduction: Rorobot BMC-3B12[H]/S
Product parameters
Tare weight: 3.3g
Maximum load: 10g
External gripping force: 0.1N
Maximum working frequency: 300 times/min
Accuracy range: 0.05mm
Safe working pressure: 24 ...
|
|
SoftTouch/Rorobot Finger Module FMA4-V3 Module height 60mm
Introduction: Rorobot Finger Module FMA4-V3, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
![Rorobot BML-2G1211[HAS] Recommended load is 120g](https://www.76kj.cn/data/attachment/forum/202308/23/173213f5yle53o59ul35c6.jpg)
|
Rorobot BML-2G1211[HAS] Recommended load is 120g
Introduction:Rorobot Robot BML-2G1211[HAS]
Features:
The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G
The soft claw material is divided into conventional type [H] ...
|
|
Rorobot B-3B18 weight 6.4g
Introduction: Rorobot Soft Beak B-3B18
Features:
Replaceable flexible chucks
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G
It can be used as a clamp or external support
Recommended for use with soft-touch actuators
Product References ...
|
![Rorobot BML-2G1624[HBAS]/S has a service life of 500,000 times](https://www.76kj.cn/data/attachment/forum/202301/12/171406r9nb06883a3b91tm.jpg)
|
Rorobot BML-2G1624[HBAS]/S has a service life of 500,000 times
Introduction: Rorobot BML-2G1624 [HBAS]/S
Features:
Clamped in the vacuum state, the fingertip is opened in the positive pressure state, and can be directly driven by the vacuum
In combination with a soft-touch air drive (positive and negative pressure switching drive), the clamping workpiece size can be increased
Soft...
|
![Soft Touch/Rorobot Soft Jaw BMC-4H18[H]/S](https://www.76kj.cn/data/attachment/forum/202212/19/165026yionlxow0obwz1om.jpg)
|
Soft Touch/Rorobot Soft Jaw BMC-4H18[H]/S
Introduction: Rorobot BMC-4H18[H]/S
Features:
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D.
The soft claw material is divided into conventional type [H and non-marking ...
|
|
Rorobot ACU-MMN Active Driver Rated at 120W
Introduction: Rorobot ACU-MMN Active Driver, ACU-MMN Active Driver--Standard, Mobile Soft Touch Gripper Special Controller, Output Air Pressure -70-120kPa, Manually Adjust the Clamping Force by Knob. Built-in drive air source and battery, can be fully charged without external power supply ...
|
|
Contact
working hours
