PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation and integrated status LED, Push-in connection, 2 changeover contacts, input voltage: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 60 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 24 V AC/DC
Typical input current at UN is 18 mA
Typical response time 3 ms ... 15 ms
Typical release time range 3 ms ... 15 ms
Coil voltage 24 V DC
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi + Au
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 12 V (1 mA)
Minimum switching current 1 mA (12V)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Contact surface (with destructible gold plating)
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
The minimum switching voltage is 12 V
Limit continuous current to 6 A
Maximum start-up current 12 A (20 ms)
The minimum switching current is 10 mA
Maximum power rating (resistive load) 192 W (24 V DC)
62 W （48 V DC）
42 W （60 V DC）
55 W （110 V DC）
66 W （220 V DC）
2000 VA （250 V AC）
Switching capacity 1 A (24 V, DC13)
1.5 A （230 V, AC15）
overview
Test voltage 4 kV AC (50 Hz, 1 minute, coil/contact)
2.5 V AC (50 Hz, 1 min, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation Foundation isolation
Pollution class 2
Overvoltage category III
UL, United States UL 508
UL 508 Recognized
UL, United States/Canada cUL 508
cUL 508 recognized
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - PLC-RPT- 24UC/21-21AU/MS - 2910526 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21HC/RW - 2900324
The PLC-INTERFACE is suitable for rail applications and high continuous currents, including base terminals with plug-in connection and plug-in miniature relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 24 V DC
Advantage...
|
|
Phoenix/Phoenix Single Relay - REL-MR-110DC/1ICT 1081618
Pluggable miniature power relay with tungsten front contacts for high impulse currents up to 800 A peak, 1 NO contact, input voltage: 110 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection can be achieved up to RT ...
|
|
Relay module with manually operated locking - PLC-RSC- 24DC/21/MS - 2909649
Phoenix/Phoenix PLC-INTERFACE relay module with manually operated locking, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with power contacts and manual operation, 1 changeover contact, 24 V DC ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-125DC/4X21 - 1157973
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 125 V DC
Test voltage coil/contact 2 kVrms (50 Hz, 1 minute, coil/contact)
Test voltage CO contact/CO contact 2 kVrms (50 Hz, 1 min ...
|
|
Phoenix/Phoenix Single Relay REL-MR-BL- 24AC/21-21 - 1109546
Pluggable miniature power relay in basic design with power contacts, 2 changeover contacts, input voltage 24 V AC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 5x106 switching cycles
Insulation characteristics
Overvoltage category III
Pollution level 3 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/2X21/FG - 2910537
PLC-INTERFACE, incl. relay base and plug-in safety relay with positively guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forced actuation, freewheeling diode, input voltage: 24 V DC
Test voltage coils/contacts ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21-21/MS - 2910519
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-230AC/21-21AU/MS - 2987998
Pluggable miniature relay, multi-layer contacts with hard gold plating, 2 PDTs, test keys, mechanical switch position display, status LED, coil voltage 230VAC
advantage
The strap can detect manual operation
Integrated status LEDs
The maximum switching current is 16A
DC model with freewheeling diode
...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-IR2/LDP- 60DC/2X21 - 2903662
Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 60 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/21-21AU -2900342
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 120 V AC/DC
advantage
Low-profile design
Via V8 adapter ...
|
|
Phoenix/Phoenix relay module - PLC-RPT- 24DC/ 1AU/SEN 2900313
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 normally open contact, input voltage 24 V DC
advantage
No additional ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1IC/ACT - 2900298
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BPT.../1 IC/ACT base terminal with plug-in connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5 with an inrush current of up to 130 A, 1 NO contact, input voltage 24 V DC
...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/21-21/EX - 2909517
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with power contact, 2 changeover contacts, 12 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
Rated...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-OR3/LDP-48DC/3X21 - 2908897
Plug-in octal relay with power contacts, 3 PDTs, test button, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 48 V DC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature ( ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21-21/EX - 2909512
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with power contacts, 2 changeover contacts, 230 V AC/220 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2
|
|
Phoenix/Phoenix Time Relays Timing Relay - MACX-TR-1T-POFF - 1119403
Phoenix Timing Relay - MACX-TR-1T-POFF - 1119403 Power-off Delay Time Relay, 24 V AC/DC ... 240 V AC/DC ample power supply with a configurable time range of 10 ms ... 10 min), two configurations, password protection, 2 P...
|
|
Relay module with manually operated locking - PLC-RSC- 24DC/21-21AU/MS - 2910507
PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
REL-PR3-110DC/3X21 single relay from Phoenix/Phoenix - 2908893
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 110 V DC
Coil side
Rated input voltage UN 110 V DC
Input voltage range 93.5 V DC ... 121 V DC (20 °C)
Typical input current at UN is 12 mA
UN's input function ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/21-21/EX 2909514
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
Forehead...
|
|
Relay module with manually operated locking - PLC-RPT-230UC/21AU/MS - 2909676
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 230 V AC/220 V DC input voltage
size
Width 6.2 mm
Height 80 mm
...
|
|
Contact
working hours
