PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 60 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 24 V DC
Typical input current at UN is 18 mA
Typical response time is 10 ms
Typical release time is 10 ms
Coil voltage 24 V DC
Protection circuit: Standby diode, Damping diode
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Minimum switching current 10 mA (12V)
Maximum start-up current 12 A (20 ms)
Limit continuous current to 6 A
Maximum power rating (resistive load) 192 W (24 V DC)
62 W （48 V DC）
42 W （60 V DC）
55 W （110 V DC）
66 W （220 V DC）
2000 VA （250 V AC）
Switching capacity 1 A (24 V, DC13)
1.5 A （230 V, AC15）
overview
Test voltage 4 kV AC (50 Hz, 1 minute, coil/contact)
2.5 V AC (50 Hz, 1 min, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation Safety isolation of input/output
Pollution class 2
Overvoltage category III
UL, United States UL 508
UL 508 Recognized
UL, United States/Canada cUL 508
cUL 508 recognized
Conformance/Certification
Name UL, United States
Mark UL 508
UL 508 Recognized
Name UL, United States/Canada
Mark UL 508
UL 508 Recognized
Name Corrosive Gas Testing
Identifire: ISA-S71.04. G3 Harsh Group
EN 60068-2-60
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module with manual operation locking function - PLC-RPT- 24DC/21-21/MS - 2910519 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RPT-110UC/21-21/RW - 2900348
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 110 V DC
advantage
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 60DC/21-21 - 2900334
The PLC-INTERFACE, consisting of the Push-in base terminal block PLC-BPT.../21-21 and plug-in miniature relay with power contacts, can be mounted on a DIN rail type NS 35/7.5, 2 PDTs, input voltage 60 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 12DC/21-21AU - 2961299
Pluggable miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 12 V DC
Benefits: RT III certified (wash-resistant)
Coil side
Rated input voltage UN 12 V DC
Input voltage range 7.8 V DC ... 29.76 V DC
Typical input current at UN ...
|
|
Phoenix/Phoenix Single Relay REL-PR-BL-125DC/4X21 - 1157973
"Hot" plugging power relay, basic, 4 PDTs, status display: LED green, input voltage: 125 V DC
Test voltage coil/contact 2 kVrms (50 Hz, 1 minute, coil/contact)
Test voltage CO contact/CO contact 2 kVrms (50 Hz, 1 min ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-G 24/ 1-LC AU - 2940087
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts to withstand small loads, 1 NO contact, input voltage 24V DC
advantage
Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage (coil/contact ...
|
|
Phoenix/Phoenix relay module with manually operated locking - PLC-RPT-120UC/ 1AU/MS/SEN - 2909679
The PLC-INTERFACE is suitable for input functions, including PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 NO contact, 120 V AC/110 V DC input voltage
size
Width 6.2 mm
Height 8 ...
|
|
Phoenix/Phoenix single relay - REL-MR- 24DC/21-21 2961192
Plug-in miniature power relay with power contacts, 2 PDTs, input voltage 24 V DC
advantage
RT III certified (wash-resistant)
Switching current up to 8 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation...
|
|
Relay module with manually operated locking - PLC-RPT-230UC/21-21/MS - 2910523
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), Push-in connection, 2 changeover contacts, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix Time Relays Timing Relay - MACX-TR-2T-MUL - 1103345
Phoenix/Phoenix Time Relays Timing Relay - MACX-TR-2T-MUL - 1103345 Multifunction Time Relay, 24 V AC/DC ... Ample power supply of 240 V AC/DC, 14 functions, configurable time range (10 ms...) 999 h:59 min), providing ...
|
|
REL-MR-12DC/21-21/C1D2 - 2906988
Plug-in miniature power relay, RT III hermetically sealed, with power contacts, 2 changeover contacts, input voltage: 12 V DC, in combination with the corresponding PLC base, is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Zone I, Class 2.
Coil side
Rated input voltage U ...
|
|
Relay module with manually operated locking - PLC-RPT- 24DC/21AU/MS - 2909672
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with manually operated plug-in miniature relay with multi-layer gold-plated contacts, 1 changeover contact, 24 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 94 m ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24UC/2X21/FG - 2910536
PLC-INTERFACE, incl. relay base and plug-in safety relay with positive guide contacts in accordance with DIN EN 61810-3, Screw connection, 2 changeover contacts, forced actuation, bridge rectifier, input voltage: 24 V AC/DC
Maximum work under rated conditions ...
|
|
REL-PR3-230AC/3X1 2903709 single relay from Phoenix
Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input voltage range 195.5 V AC ... 253 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input electricity under UN ...
|
|
Phoenix/Phoenix relay module - PLC-RSC-120UC/21-21 2967086
PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 120V AC/110V DC
advantage
Low-profile design
Implemented via V8 adapter ...
|
|
Phoenix/Phoenix Single Relay REL-FO/LRC-120AC/2X21/MS - 1308316
"Hot" plugging miniature relay with mechanical switching position indicator, FASTON connection, 2 changeover contacts, status display: LED yellow, freewheeling diode, RC element, input voltage: 120 V AC
Coil side
Rated input voltage UN 120 V AC
Input voltage range 96 ...
|
|
REL-PR3-230AC/3X21 - 2903705
Plug-in high-power relay with power contacts, 3 PDTs, coil voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input voltage range 195.5 V AC ... 253 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input current at UN 12 ...
|
|
Phoenix/Phoenix single relay REL-MR- 18DC/21 2961383
Pluggable miniature power relay with power contacts, 1 PDT, input voltage 18 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Coil side
...
|
|
Relay module with manually operated locking - PLC-RSC-230UC/21HC/MS - 2910518
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), screw connection, 1 changeover contact, input voltage: 230 V AC / 220 V DC
size
Width 14 mm
Height 80 mm ...
|
|
Phoenix/Phoenix relay module RIF-0-RSC-12DC/ 1 - 2903367
Prefabricated relay modules with screw connections, including: relay base with pop-up and power contacts. Contact type: 1 NO contact. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 60DC/21HC - 2967659
PLC-INTERFACE, INCL. PLC-BSC.../21 HC base terminal, screw connection, with plug-in miniature relays, for high continuous currents, for mounting on DIN rail NS 35/7.5, ultimate continuous current up to 10 A, 1 PDT, input voltage 60 V DC
advantage
Place...
|
|
Contact
working hours
