The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 normally open contact, input voltage 24 V DC
advantage
No additional combination terminal blocks are required
Up to 60% installation time savings
Efficient system connectivity via V8 adapter
Safely isolated relay module between coil and contact in accordance with DIN EN 50178
Up to 80 % installation space savings
Functional plug-in bridges
Sensors that are connected directly to the relay module
The maximum power consumption under the rated condition is 0.22 W
Test voltage Coil/contact 4 kV AC (50 Hz, 1 minute, coil/contact)
Coil side
Rated input voltage UN 24 V DC
Input voltage range 18.5 V DC ... 33.6 V DC （20 °C）
Typical input current at UN is 9 mA
Typical response time is 5 ms
Typical release time is 8 ms
Protection circuits polarity protection; Polarity protection diodes
spare diodes; Freewheeling diodes
The operating voltage is displayed with a yellow LED
handoff
Contact Type: 1 N/O contact
Switch contact type Single contact
Drive and function monostability
Contact material AgSnO, hard gold plating
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 100 mV at 10 mA
Limit continuous current to 50 mA
The maximum starting current is 50 mA
Minimum switching current 1 mA (24 V)
Maximum power rating (resistive load) 1.2 W (24 V DC)
Switching: When the gold plating is broken
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Limit continuous current to 6 A
Minimum switching current 10 mA at 12 V
Maximum power rating (resistive load) 140 W (24 V DC)
20 W (for 48 V DC)
18 W (can be used for 60 V DC)
23 W (for 110 V DC)
40 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.1 A (at 220 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
Connection: Push-in connection
Stripping length 10 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Mounting Type: DIN rail mounting
Assembly Instructions Arrangement without spacing
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix relay module - PLC-RPT- 24DC/ 1AU/SEN 2900313 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RSC-12DC/ 1IC/ACT -1078800
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BSC.../1 IC/ACT base terminal with plug-in connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5 with an inrush current of up to 130 A, 1 NO contact, input voltage 12 V DC
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 12DC/21-21 - 2900329
The PLC-INTERFACE, consisting of the Push-in base terminal block PLC-BPT.../21-21 and a plug-in miniature relay with power contacts, can be mounted on a DIN rail type NS 35/7.5, 2 PDTs, input voltage 12 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix hybrid relay EMG 22-REL/KSR-G 24/TRN35 - 2952350
Relay module with miniature switching relay with integrated NPN transistor control, low control current, contact (AgNi): medium to large load, 1PDT, rated control voltage 24V DC
advantage
Low control current (module B), 0.5 mA depending on the model
Between the coil and the contacts ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/21/RW 2900318
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 24 V DC
advantage
...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/ 1AU/SEN - 2966317
The PLC-INTERFACE is suitable for input functions, including PLC-BSC.../SEN base terminals with screw connection with plug-in miniature multilayer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 24 V DC
advantage
Maximum savings of 60 ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - TR-ES-OFF-CC-24/240-10H - 2907320
Phoenix/Phoenix Time Relays Timing relay - TR-ES-OFF-CC-24/240-10H - 2907320 timer relay with delay release and an adjustable time range (50 ms - 10 h), supply voltage 24-48VDC/24-240VAC, 1 PDT
size
Wide...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/L- 24AC/4X21AU - 2903683
Plug-in industrial relay with power contacts and additional contacts plated with hard gold, 4 PDT, test button, status indication LED, mechanical switch setting display, coil voltage: 24 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Environment...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/21AU - 2961121
Pluggable miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Give birth...
|
|
Phoenix Single Relay REL-MR-BL-110DC/21HC - 1109539
Pluggable miniature power relay, basic design, with power contacts, for high continuous currents, 1 changeover contact, input voltage 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation characteristics
Overvoltage Category ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 48DC/21AU - 2961244
Pluggable miniature relay, multi-layer contacts, 1 pair of changeover contacts, input voltage 48V DC
Advantages Contacts up to 6 A
Coil side
Rated input voltage UN 48 V DC
Input voltage range 28.8 V DC ... 132 V DC
handoff
Contact Type: 1 changeover contact
Open...
|
|
Phoenix/Phoenix relay module - PLC-RSC- 24DC/21-21/MS - 2910502
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, screw connection, 2 changeover contacts, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP-220DC/4X21 - 2903682
Plug-in industrial relay with power contacts, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2–, coil voltage: 220 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 24DC/21/MS - 2909642
Plug-in miniature power relay with power contact, 1 changeover contact, manual operation, 24 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage/transportation)
|
|
Phoenix/Phoenix relay module PLC-RSC- 12DC/21AU - 2966919
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 12 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
REL-MR-24DC/21-21/ATEX - 2906213 single relays from Phoenix
Miniature power relay, RT III hermetically sealed, with power contacts, 2 changeover contacts, input voltage: 24 V DC, in combination with the corresponding PLC base, is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Zone I, Class 2.
Coil side
Rated input voltage UN 24 V ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 60DC/21 - 2961118
Plug-in miniature power relay with power contacts, 1 PDT, input voltage 60 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Product Category ...
|
|
Phoenix/Phoenix relay module PLC-RSC-24DC/21/EX - 2909524
PLC-INTERFACE, consisting of DIN rail mounting, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 24 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 48DC/21 - 2900301
The PLC-INTERFACE, consisting of PLC-BPT.../21 base terminals with Push-in technology and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1 PDT, input voltage 48 V DC
advantage
Low-profile design
Effective via V8 adapter ...
|
|
Phoenix/Phoenix Time Relays Timing Relay - ETD-BL-2T-I-230-PT - 2907714
Compact pulse encoder with adjustable pulse and pause time (50 ms - 100 h), wide-area power supply, Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and self-propelled ...
|
|
RIF-4-RPT-LV-230AC/3X21 - 2903276
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 3 PDT. Input voltage: 230 V AC
The maximum power consumption under rated conditions is 3.22 W
Test voltage coil/contact ...
|
|
Contact
working hours
