Phoenix Timing Relay - MACX-TR-1T-POFF - 1119403 Power-off Delay Time Relay, 24 V AC/DC ... 240 V AC/DC ample power supply with a configurable time range of 10 ms ... 10 min), available in two configurations, password protected, 2 PDTs, screw connection.
note
Restrictions on use EMC: Class A products, see manufacturer's declaration in the download area
size
Width 22.5 mm
Height 109 mm
Depth 114 mm
Environmental conditions
Ambient temperature (operating) -25 °C ... 60 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Maximum height ≤ 2000 m
Permissible humidity (operating) 10 % ... 95 % (non-condensing)
Protection class IP20
Immunity to interference EN 61000-6-2
Coil side
Input voltage range 24 V AC/DC ... 240 V AC/DC （-15 % … +10 %）
Temperature sensitivity ≤ 0.01 %/°C
Function POFF: Power-off delay
Set the range time 10 ms ... 10 min.
Recovery time 250 ms
Contact side
Contact Type: 2 floating changeover contacts
Contact Material AgNi (90/10)
The maximum switching voltage is 400 V AC
Maximum power rating (resistive load) 2000 VA (8 A / 250 V AC)
Output fuse 8 A (fast blowing)
routine
Mechanical life: approx. 3x 104 cycles
Power Rating 2.5 VA (0.8 W)
Sustained power-up time ≥ 250 ms
Installation Position Any
Assembly instructions Mounting on standard DIN rail NS 35 (acc. to EN 60715)
Color: Traffic Grey A RAL 7042
Housing insulation PBT
Permissible humidity (operating) 10 % ... 95 % (non-condensing)
Rated frequency 48 Hz ... 63 Hz
Connect your data
Connection: Screw connection
Stripping length 10 mm
Rigid conductor cross-section 0.2 mm² ... 2.5 mm²
Flexible conductor cross-section 0.2 mm² ... 2.5 mm²
Attachable guide cross-section AWG 24 ... 14
Torque 0.5 Nm ... 0.6 Nm （5 lb in … 7 lb in）
Standards and Specifications
Electromagnetic compatibility in accordance with EMC regulations
Pulse withstand voltage 4 kV (1.2/50 μs, IEC 60947-5-1)
Emission interference EN 61000-6-4
Immunity to interference EN 61000-6-2
Standard/Procedure IEC 60947-5-1
IEC 61812-1
Rated insulation voltage 300 V AC
Insulation Foundation isolation
Pollution level 3
Overvoltage category III
Dielectric strength 2 kV ((2 mA, 60 s)( IEC 60947-5-1))
Low Voltage Directive Complies with the Low Voltage Directive
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix Time Relay Timing Relay - MACX-TR-1T-POFF - 1119403 products, the purpose of 76 Technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RSC-24DC/21HC/EX - 2909519
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
...
|
|
Phoenix/Phoenix relay module with manually operated locking - PLC-RPT-120UC/ 1AU/MS/SEN - 2909679
The PLC-INTERFACE is suitable for input functions, including PLC-BPT.../SEN base terminals with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 NO contact, 120 V AC/110 V DC input voltage
size
Width 6.2 mm
Height 8 ...
|
|
Phoenix/Phoenix relay module PLC-RPT-24DC/21/EX - 2909528
PLC-INTERFACE, consisting of DIN rail mounting, 6.2 mm base terminal with plug-in connection and "hot" plug-in miniature relay with 6 A power contact, 1 changeover contact, 24 V DC input voltage. ATEX/IECEx (Zone 2) and Ex zone Class I, Div. 2 ...
|
|
REL-PR3-230AC/3X21 - 2903705
Plug-in high-power relay with power contacts, 3 PDTs, coil voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input voltage range 195.5 V AC ... 253 V AC (20 °C)
Trunk frequency 50/60 Hz
Typical input current at UN 12 ...
|
|
Relay module with manually operated locking - PLC-RPT-230UC/21AU/MS - 2909676
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 230 V AC/220 V DC input voltage
size
Width 6.2 mm
Height 80 mm
...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21HC/EX - 2909534
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with plug-in interface and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Relay module with manually operated locking - RIF-1-RSC-LDP-24DC/1X21MS - 2905659
Prefabricated relay modules with screw connections, including: relay bases, relay holders, power contact relays with test buttons and integrated status LEDs, and freewheeling diodes. Contact type: 1 changeover contact. Input voltage: 24 V DC
RIFLINE's complete product range ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1AU/MS/SEN - 2909678
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relays, manual operation, 1 normally open contact, 24 V DC input voltage
The maximum power consumption under the rated condition is 0.22 W
Test Electricity ...
|
|
Phoenix/Phoenix relay module RIF-2-RPT-LV-24AC/2X21 2903313
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 1.58 W
Test voltage (coil/contact ...
|
|
Relay module with manually operated locking - PLC-RPT-120UC/21/MS - 2909669
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal, plug-in connection, with plug-in miniature relay with power contacts and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage
advantage
Low-profile design
Implemented via V8 adapter with ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-BL-24DC/21HC/MS - 2908180
Plug-in miniature relay with power contact, 1 changeover contact, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 24 V DC
size
Width 13 mm
Height 29 mm
Depth 25.5 mm
Environmental conditions
Ambient temperature (operating) -40 ...
|
|
RIF-2-RSC-LDP-125DC/4X21 relay module from Phoenix/Phoenix - 290331
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, and brackets. Contact type: 4 changeover contacts. Input voltage: 125 V DC
The maximum power consumption under rated conditions is 0.94 W
Test voltage (coil/contact) 2.5 kVrms ( ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR- 24/21-LC - 2942658
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 1PDT, input voltage 24 V AC/DC
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage Coil/contact 4 kV ...
|
|
DEK-REL- 5/I/1 - 2941183 relay modules from Phoenix
Relay module with solid state miniature relay, contacts (AgNi+Au): Small to medium loads, 1 NO contact, input voltage 5 V AC/DC, can be mounted on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Save up to 73 % on ...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/21/EX - 2909522
PLC-INTERFACE, consisting of DIN rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 12 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix Single Relay REL-MR-110DC/21-21 - 2961202
Pluggable miniature power relay with power contacts, 2 PDTs, input voltage 110 V DC
advantage
RT III certified (wash-resistant)
Switching current up to 8 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Break off...
|
|
The PLC-RPT-230UC/21HC relay module from Phoenix 2900297
The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on the DIN rail NS 35/7.5 with a limit continuous current of up to 10 A, 1 PDT, and an input voltage of 230 V AC/DC
Excellent...
|
|
REL-IR2/LDP- 24DC/2X21 - 2903660 single relay with manually operated locking
Pluggable industrial relay with power contacts, 2 PDTs, test key, status LED, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 24 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ring...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/21HC - 2900291
The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on the DIN rail NS 35/7.5 with a maximum continuous current of up to 10 A, 1 PDT, and an input voltage of 24 V DC
advantage
...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21/EX - 2909526
PLC-INTERFACE, consisting of DIN rail mounting, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. It has been approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 requirements.
|
|
Contact
working hours
