The ifm is equipped with an intelligent multifunction display with IO-Link

In the motor test system, the measurement of torque is often achieved by dynamic torque sensors. The motor under test is connected to the dynamic torque sensor through the coupling, and the other end of the sensor is connected to the load motor through the coupling. When the system is operating, the motor under test is operating in the speed ring ...

2.1 Inspection interval Detect the stop, start and orientation of elevators and lifting equipment; Detect the orientation of the vehicle to avoid collision between two objects; Detect the setting orientation of the operating machinery and the limit orientation of the moving machine or components; Detect the abort azimuth of the rotary body, the opening or closing of the valve; Detection of cylinders or hydraulic ...

The first statement is that the sensor module belongs to a kind of sensor module, according to different packaging forms, the sensor module can be divided into different types such as chip BQ4010YMA-200, PCBA, shell packaging module, etc., collectively referred to as the sensor module, different types of sensor modules according to different ...

There are many different series under ifm sensors, including inductive and capacitive sensors. So what's the difference between the two sensors? ifm inductive sensors are essential in industrial use.

Gas detector is an instrumentation tool for gas leakage concentration detection, which mainly uses sensors to detect the types of gases present in the environment, and gas sensors are used to detect the composition and content of gases. Many environmental factors can affect gas detector sensing ...

Hydrogen is a colorless and odorless gas, with a density of 0.09 g/L (the lightest gas) under standard conditions, and is poorly soluble in water. At -252 °C, it becomes a colorless liquid, and at -259 °C, it becomes a snowflake-like solid. When measuring hydrogen, pay attention to: Hydrogen...

First, press the [Acknowledge] button to enter the first-level menu, press the [Up] or [Down] button to find the menu you want to set, and press the [Acknowledge] button to enter the set value, which will be displayed at this moment. Long press the [Up] or [Down] button, when the value starts flashing, continue to press to adjust the ...

1. When measuring the liquid pressure, in order to prevent the sensor from being damaged by overpressure, the device position of the sensor should prevent the impact of the liquid. 2. When measuring steam or other high-temperature media, it is necessary to connect a condenser such as a buffer pipe. 3. The impulse pipe should be installed in a place where the temperature fluctuation is small. ...

With the continuous development of flow sensors, more and more types of flow sensors are gradually coming out, and they have their own advantages and disadvantages, flow sensors. 1. Advantages (1) The flow sensor can be used to measure industrial conductive liquids or slurries. （2 ...

(1) Fork photoelectric sensor Placing a light emitter and a sticker face to face on either side of a slot is a fork photonics. The luminaire can announce infrared or visible light, and the luminaire can receive light in an unobstructed environment. But when the object to be detected passes through the slot, the light is blocked ...

Photoelectric switch (photoelectric sensor) is the abbreviation of photoelectric proximity switch, which uses the shielding or reflection of the beam by the detected object to connect the circuit by the synchronous loop to detect the presence or absence of the object. When the photoelectric sensor outputs the signal, the signal is occasionally unstable, and many people do not know what to do.

Principles of the control system of IFM controllers: The IFM ifm controller is a process that continues to detect the unit to be manipulated (control variable x) and compares it with the reference variable w, and according to the results of the comparison, the control variable is affected to get used to the reference variant. In most cases, ...

Contact display for easy reading and intuitive operation ●Clear and easy-to-read display screen ● Contact display and clear text for intuitive operation ●When the set limit is exceeded or lowered, the display is changed to red/yellow/green ●16-bit resolution ...

Through selective data collection on your machine, you are able to increase the overall power of your machine. DISPLAYS THE ACTUAL VALUE OF THE DEVICE'S PERFORMANCE AND HAS BEEN OPTIMIZED BY THE LINERECORDER MODULE MDE. Possibility of use: ...

1. The appearance is installed outdoors, and it is recommended to install a sunshade to prolong the service life of the appearance. 2. Wire and cable protection pipes should be sealed to avoid water accumulation. 3. Although the appearance itself is equipped with lightning protection equipment, when the appearance is used in the multi-lightning area, it is advocated to distinguish the inlet and outlet lines on the surface.

ifm pressure sensors PN for industrial use: The first is consolidation: an ambition measuring element suitable for various pressure scales; The second red-green scale: according to the color of the display, you can quickly identify the "good scale" or switch ...

The first point is that photoelectric sensors and fiber optic sensors work differently First of all, from the principle of operation of the two, first of all, the photoelectric sensor is operated according to the principle of the photoelectric effect, that is to say, when the light hits the photoelectric sensor made of semiconductors, the light will be announced.

The operation of the barrier switch should focus on avoiding pulling and closing the knife switch with load, and avoiding closing the knife switch with grounding. The correct order of operation is: Power transmission operation sequence, check the circuit breaker in the open position, first close the bus (power supply) side knife switch ...

1. Encoder own problem: It refers to the problem of the encoder's own components, resulting in its inability to generate and output correct waveforms. In this case, the encoder needs to be replaced or its internal components repaired. 2. Encoder connection cable problem: the probability of this problem is high, and the maintenance is under repair.

Torque sensor is a component that must be installed in some industrial products, mainly used to measure speed and viewpoint orientation, but different types of sensors have different ways to use and function, what is the classification of torque sensor? Resistance strain ...