CHINT/CHINT Time Relay JSS48B Delay 1 Conversion

Introduction: NJB1-YW liquid level relay is suitable for automatic water level control in industrial facilities and equipment, civil water towers, high-level water tanks, underground reservoirs and other occasions. This product is not suitable for level control of flammable and explosive liquids such as oil, chemical liquids, etc. ...

Introduction: NXJ series miniature electromagnetic relay 2Z, 3Z, 4Z, 2ZH four contact forms: AC/DC specifications are complete; High contact reliability, can be used for PLC control; Transparent dust cover encapsulation; Equipped with matching sockets; Optionally available with status indicator. ...

NX2 series surface-mounted plastic distribution box (box) (hereinafter referred to as the box) is suitable for AC 50/60Hz, rated voltage 230V/400V, load current does not exceed 100A single-phase three-wire terminal circuit, as a power distribution and control of electrical equipment, but also for the overload of the line, short ...

NH8-125 isolating switch is mainly suitable for AC 50Hz, rated voltage to 415V, rated current 125A and below in the power distribution and control circuit, mainly as the terminal combination electrical appliances in the main switch, can also be used for infrequent control of all kinds of low-power electrical appliances and lighting, widely used in industrial and mining enterprises ...

NR4 series thermal overload relay (hereinafter referred to as thermal relay) is suitable for AC 50Hz/60Hz, rated voltage 690V, 1000V, Overload and phase failure protection of AC motors with current (0.1-180)A for long-term operation or intermittent long-term operation. Thermal relays have phase loss protection, ...

Introduction: JYB-714 series liquid level relay is suitable for automatic control circuit of liquid level with AC 50Hz and rated control power supply of 380V and below, and is used for automatic level control of civil water towers, high-level water tanks, underground reservoirs and other occasions. ...

Introduction: JQX-13F small high-power electromagnetic relay 10A contact switching capability; AC/DC specifications are complete; Transparent dust cover encapsulation, various installation methods; A variety of sockets are available; Optionally available with status indicator. Give birth...

Introduction: NJG1 series solid state relay adopts photoelectric isolation between input and output, one-way thyristor reverse parallel output, zero-crossing conduction, built-in RC absorption loop, MOV protection, epoxy resin potting. Widely used in electric furnace heating constant temperature system, CNC machinery, plastic machinery, food machinery, ...

Product Overview KG10M time-controlled switch can automatically turn on and off the power of various electrical equipment according to the time set by the user. The control object can be street lights, neon lights, advertising signs, production equipment, radio and television equipment, etc., all circuit equipment and home that need to be turned on and off regularly.

NH4-125 disconnector (hereinafter referred to as the switch) is suitable for AC 50Hz, rated current to 125A, rated voltage to 400V in the power distribution and control circuit, mainly as the main switch in the terminal combination electrical appliances, can also be used for infrequent control of various low-power electrical appliances and lighting, widely used in ...

Introduction: NXRC series contactor relays are mainly used in relay control, signal transmission, isolation amplification and other circuits with AC 50Hz or 60Hz, rated working voltage to 380V and DC rated voltage to 220V, for switching, breaking and amplifying. ...

Introduction: JQX-13FA small high-power electromagnetic relay 20A contact switching capability; AC/DC specifications are complete; Transparent dust cover encapsulation, various installation methods; A variety of sockets are available; Optionally available with status indicator. Give birth...

Product Overview The NJG2 Solid State Relay is a switching device that replaces contact with a semiconductor device. The input and output are photoelectically isolated, and when a control signal is added to the input, the output can be converted from a broken state to a connected state. NJG2 solid state relay is widely used in electric furnace heating...

Introduction: NR4 series thermal overload relay (hereinafter referred to as thermal relay) is suitable for AC 50Hz/60Hz, rated voltage 690V, 1000V, current (0.1-180)A long-term work or intermittent long-term work of AC motor overload and phase failure protection. This product complies with GB14048.4 ...

NH9-32 disconnector (hereinafter referred to as the switch) is suitable for AC 50Hz, rated voltage to 400V, rated current 32A circuit, mainly used for on-off resistive loads, including appropriate overload, for the purpose of isolating the line from the power supply. The switch can carry the current under normal circuit conditions ...

Introduction: CHINT/CHINT small electromagnetic relay NJDC-12 has two contact forms: 2Z and 3Z; The contact switching current can reach 7.5A, and the AC and DC specifications are complete. With test button function, it can be jogged or closed and locked. A variety of device sockets are available. ...

NRE8 series electronic overload relay (hereinafter referred to as the relay) is mainly used in the circuit with AC 50/60Hz, rated working voltage below 690V, and the current is within the range of the setting current calibrated by the casing, for three-phase motor overload and phase failure protection. This relay is an application microcontroller ...

NJA1-KG relay is mainly used as a timing (alarm clock), switch-on or off-control in the control circuit with AC frequency of 50Hz, rated control power supply voltage to 240V and DC rated control power supply voltage to 240V.

JZC4 series contactor relay is mainly used in relay control, signal transmission, isolation amplification and other circuits with AC 50Hz or 60Hz, rated working voltage to 400V and DC rated voltage to 220V, for switching, breaking and amplifying. Standards: GB/T 14048.5, IEC 6 ...

Product Overview NJG1 series solid state relay adopts photoelectric isolation between input and output, unidirectional thyristor reverse parallel output, zero-crossing conduction, built-in RC absorption loop, MOV protection, epoxy resin glue. Widely used in electric furnace heating constant temperature system, CNC machinery, plastic machinery, food machine ...