Introduction: Honeywell's PX3 series heavy-duty pressure sensors feature piezoresistive sensing technology based on ASIC (application-specific integrated circuit) signal conditioning and are equipped with a brass housing and Metri-Pack 150 or wiring harness electrical connection. The PX3 series is fully calibrated and temperature-compensated from -40°C to 125°C [-40°F to 257°F].
Features:
Pressure range: 1 bar to 50 bar | 15 psi to 700 psi (absolute and sealed gauge)
Proportional output: 0.5 Vdc to 4.5 Vdc or 0.33 Vdc to 2.97 Vdc
The 4 mA to 20 mA output supports long-distance output signal transmission
Calibration and temperature compensation
Total Error Band: ±1.0% FSS, -20°C to 85°C [-4°F to 185°F]
External frost/thaw resistance: -30°C to 50°C [-22°F to 122°F] for 6 cycles
Insulation resistance: >100 MOhm, 1500 Vdc (in non-ionized dry air)
Dielectric strength: AC1500V/min or AC1800V/sec (in non-ionized dry air)
Current consumption: 3.5 mA max
EMC (Electromagnetic Compatibility) Radiated Immunity: 200 V/m (proportional voltage output) 140 V/m (current output) according to ISO 11452-2
Ingress protection IP67 (Metri-Pack connector), IP69K (cable harness), IP65 (DIN connector)
RoHS, REACH, and CE compliant
Six industry-standard pressure port types, including line ports
Product parameters
Set name :P X3
Signal Conditioning: Amplification
Measurement Type: Sealed gauge pressure
Output Type: Proportional: 5.0 Vdc to 4.5 Vdc
Burst pressure: 51 bar
Interface Type: 7/16-20 UNF 1/4 in 45° Female Flare with Ejector Pin (SAE J512)
Accuracy: ±0.25 %FSS
Operating Temperature: -40°C to 125°C [-40°F to 257°F]
Storage temperature: -40°C to 125°C [-40°F to 257°F]
Shock: 100 GF per MIL-STD-202G, Method 213B, at 25°C
Media Compatibility The :P X3 series is compatible with the following media: common HFC (hydrofluorocarbon) refrigerants such as R410A and R134A; next-generation lower global warming potential (GWP) refrigerants such as R448A (Solstice® N40), R32, and R1234ZE; engine oil; petroleum-based hydraulic fluids; DOT 3 brake fluid; and dry air. For ammonia and other corrosive media, see Honeywell SPT Series The PX3 Series is not recommended for use with media containing water, saturated air (such as steam and water vapor), or ammonia.
Pressure range: 0 bar to 10 bar
Temperature Compensation: Yes
Supply voltage: 4.75 V to 5.25 V
Overpressure: 31 bar
Electrical Connections :D elphi Metri-Pack 150, Standard (UL V-0)
Total Error Band: ±1.0% FSS (-20°C to 85°C [-4°F to 185°F]) ± 2.0% FSS (<-20°C, >85°C [<-4°F, >185°F])
Response time: <2 ms
Compensation temperature range: -40°C to 125°C [-40°F to 257°F]
Vibration: 20 G scan, 10 Hz to 2000 Hz (at 25°C)
Lifespan: >10 million full-scale pressure cycles within the calibrated pressure range
Agency Approvals & Standards: IP67
This article introduces the PX3AF1BH010BSAAX products of Honeywell pressure sensors, if you are interested in Honeywell sensors, please also contact our customer service, we look forward to your call, hope our technology and services can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Honeywell/Honeywell Flow Sensor AWM5101VA Weight 60g
Introduction: The AWM5000 Series Microbridge Mass Flow Sensors feature a venturi flow housing. This series measures airflow of up to 20 standard liters per minute (SLPM) while generating a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the airflow, which greatly ...
|
|
Honeywell/Honeywell pressure sensor HSCDAND001BASA3
Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...
|
|
Honeywell Board Mount Pressure Sensors TruStability™ RSC Series
Compensatory. As low as ±0.25 %FSS TEB. Ultra-low (differential, gauge), low (absolute, differential, gauge). 24-bit digital SPI-compatible output. DIP，SMT
Pressure range
± 1.6 mbar to ±10 bar, ± 160 Pa to ±1 MPa, ± 0.5 inH2 ...
|
|
Honeywell Sensors JM1202ED1C2
honeywell Honeywell Sensors JM1202ED1C2 Cylindrical Sensors JSM8 Series
Rated: 12VDC-24VDC
Load current: ≤100mA
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: ...
|
|
Honeywell 1LEL 75C Industrial Gas Sensor
Product Description: The Series 1 Gas Sensor is a small and ultra-low profile gas detector design using the Series 1 low profile design, the sensor has a turret mounted to the front of the instrument to minimize instrument height. This revolutionary design also simplifies the entry of target gases into the sensor surface ...
|
|
Honeywell Temperature Sensor Thermistor 120 Series
Miniature glass probe. -60°C to 300°C [-76°F to 572°F]
The 120 Series and Thermistors are shock-resistant, rugged, glass-sealed devices that are typically suitable for immersion in liquids and can be easily installed in air sensor assemblies. Also included is a standard glass probe configuration (12 ...
|
|
Honeywell Industrial Pressure Sensors PX3 Series
Amplified. ±1% FSS type TEB. Absolute, sealed gauge pressure. Housing Material: Brass C36000, Range: 1 bar to 50 bar, 15 psi to 700 psi
Honeywell's PX3 series heavy-duty pressure sensors feature ASIC (Application-Specific Integrated Circuit) signal conditioning based piezoresistive ...
|
|
Honeywell Sensor DPT0100U1-B
Honeywell's DT series of micro differential pressure transmitters are used to measure differential pressure or gauge pressure, and provide a variety of measuring ranges as low as +/-50Pa and as high as 0-l0kPa, suitable for: VC HVAC, intelligent building energy management, VAV and damper control.
Product Features:
· All stainless steel capacitive sensitive components
...
|
|
Honeywell/Honeywell Humidity Sensor HIH6120-021-001
Introduction: Honeywell HumidIcon Digital Humidity/Temperature™ Sensor, HIH6100 Series, Digital Output Type Relative Humidity (RH) and Temperature Sensor in one package. The sensor provides an accurate ±4.0 %RH level, as well as a temperature level of ±0.5 °C.
...
|
|
Honeywell/Honeywell pressure sensor RSCDRRI002NDSE3
Description: The RSC series is a piezoresistive silicon pressure sensor capable of taking pressure readings from either a digital output or an analog output within a specified full-scale pressure span and temperature range. Through a 24-bit analog-to-digital converter equipped with integrated EEPROM, it is possible to control sensor offset, sensitivity, temperature, etc.
|
|
Honeywell Industrial Gas Sensor 3 Series
The Series 3 is City Technology's oldest family of gas sensors. A wide range of sensors have evolved from this series and are available with 4mA to 20mA and mV transmission boards. The Series 7 is an upgrade to the series.
This article introduces the Honeywell/Honeywell ...
|
|
Honeywell/Honeywell flow sensors AWM2100V Low differential pressure
Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...
|
|
Honeywell Sensors JSM81E5D4X
honeywell Honeywell Sensors JSM81E5D4X Cylindrical Sensors JSM8 Series
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...
|
|
Honeywell/Honeywell RTD Sensor HEL-777/776 Series
100 Ω or 1000 Ω platinum resistance temperature sensor (RTD). -55°C to 150°C. Plastic housing SIP
The HEL-776/HEL-777 series platinum RTDs are designed to measure temperature in printed circuit boards, temperature probes, or other cryogenic applications with a measurement range of -55 °C to 15 ...
|
|
Honeywell/Honeywell sensors TBPDANS001PGUCV non-amplified
Introduction: Honeywell's TBP series of compensated and non-amplified basic board-mount pressure sensors are specifically designed piezoresistive silicon pressure sensors. This series of sensors is simple and easy to operate, excellent quality, cost-effective, mV output, non-amplification and temperature compensation.
|
|
Honeywell Hazardous Area Pressure Sensor Model 911FMD High Range
A large number of ranges. Wet/wet, differential pressure. 17-4 PH Stainless Steel Wetted Material, 1,000 psid to 10,000 psid, 4 mA to 20 mA Output, Two-Wire (Standard)
The Model 911FMD High Range Stainless Steel Wet/Wet Differential Pressure Sensor is designed for harsh industrial applications.
|
|
Honeywell Pressure Transducers SSCDANN006BGAA3
Summary: The SSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the circuit board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...
|
|
Honeywell Board Mount Pressure Sensors ABP Basic Series
Compensatory. ±1.5% FSS TEB。 Low voltage. Differential pressure or gauge pressure. Digital or analog output. DIP, lead-free SMT, SMT. Cost-effective
Pressure range
>± 60 mbar to ±10 bar, ±6 kPa to ±1 MPa, ±1 psi to ±150 psi
description
ABP series is a press...
|
|
Honeywell Hazardous Area Pressure Sensor Model 811FM
Two-wire. Gauge/absolute pressure transmitter, psig/a to 10,000 psig/a, 4 mA to 20 mA output, 0.25% accuracy. True gauge pressure device with airtight design
The Model 811FM is a two-wire transmitter with a weldable stainless steel diaphragm for liquid, gas, ...
|
|
Honeywell Temperature Sensor Thermistor 194 Series
Uni-Curve resistors with insulated conductors and epoxy coating. -60°C to 150°C [-76°F to 302°F]
The 194 Series thermistors are high-quality, cost-effective, resistor- and temperature-matched, interchangeable devices. The product does not need to calibrate the resistance temperature of the circuit components one by one.
|
|
Contact
working hours
