Honeywell Temperature Sensor Thermistor 120 Series

MICROceL® and MICROpeL® are City Technology's smallest and most compact sensor series. These include carbon monoxide, hydrogen sulfide and certified combustible gas sensors. This article introduces Honeywell's industrial gas ...

Honeywell's 13 mm series stainless steel pressure transducers are designed for high-pressure applications that require the measurement of hazardous media in harsh environments. The series features Honeywell's proven piezoresistive semiconductor sensor chips in an oil-filled isolated housing, with or without ...

The CRIR series is a single-channel, non-dispersive infrared (NDIR) sensor. The CRIR M1 and CRIR E1 have a sensing cavity with an infrared light source at one end and a detector with a filter on the other. The light source emits a wavelength of radiation that includes a CO2 absorption band. Filters block ...

Medium range. Wet/wet, differential pressure. 17-4 PH stainless steel wetted material. Accuracy: 0.25% FS; Range: 50 psid to 750 psid. The Model 911FMD Medium Range Stainless Steel Transmitter is made of 17-4 PH stainless steel wetted parts and is hermetically sealed for use in hazardous environments.

Introduction: ZS Series, All-in-One Sensor, Harsh Environment 3-Wire DC, Cylindrical, Stainless Steel, Ceramic, Normally Open Current Source Output, 12 Vdc to 32 Vdc. Environmentally protected stand-alone proximity sensor housed in a rugged stainless steel housing designed for ...

E-I tested matching beads on the fitting assembly. -60°C to 300°C [-76°F to 572°F] The 115 series thermistors consist of two beads, each mounted on a special hermetically sealed joint. High resistance thermistors should be used at high ambient temperatures to achieve the most ...

Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Flush membrane pressure transducer ranging from 100 psi to 15,000 psi with 0.50% full-scale accuracy The Model A-105 gauge pressure sensor is manufactured using a synthetic 17-4 PH stainless steel wetted diaphragm. The advantage of this type of design is that the thin diaphragm and the heavy side walls are made up of the same piece of non-...

Amplified. As low as ±2 %FSS TEB. Gauge pressure and seal gauge pressure. 304L SS port, Haynes 214 alloy diaphragm, plastic body. 6 bar to 550 bar, 0 psi to 8000 psi The MLH series of heavy-duty pressure sensors combines application-specific integrated circuit (ASIC) technology with ...

Honeywell Sensors DPT0100U1-A DPT Series Air Differential Pressure Sensors Measuring range: 0 - 100 Output signal: 4-20mA All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy use

The i-Series intelligent gas sensors are compact, low-profile sensors based on City Technology's proven solutions. The service life of these sensors has been extended to 5 years, and the operating temperature and humidity range has been significantly expanded. Compact, pre-calibrated, predictive ...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Compensatory. Low voltage. Gauge pressure. mV output. DIP, lead-free SMT, SMT. Accuracy: ±0.25% FSS BFSL. Cost-effective Pressure Range: TBP Series: 60 mbar to 10 bar, 6 kPa to 1 MPa, 1 psi to 150 psi, microvolt analog output NBP Department ...

Industrial-grade gauge pressure sensor with 1 psig to 10,000 psig output in mV/V. ±0.50% FS BFSL The Model LM pressure transducer is a cost efficient general purpose gage-only device. The sensor is available in three materials, which are ...

City Technology's Series 7 sensors are suitable for gas detection, including oxygen and toxic gases. The sensors are suitable for portable detectors, fixed detectors, and some medical gas detection. City Tech's Series 7 is suitable for including oxygen and ...

HONYWELL DPT0100U2-A Sensor: DPT Series Air Differential Pressure Sensor All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance Characteristics and specifications: power supply voltage (voltage ...

Summary: The NBP series is ideal for users who want to self-compensate, calibrate, and amplify themselves so that they can utilize a bare sensor for maximum resolution output and tailor the algorithm to the requirements of the specific application. In addition, the NBP series is available in a variety of package forms and mounting options ...

Description: Honeywell's PX2 series of heavy-duty pressure transducers are a family of configurable pressure sensors with piezoresistive sensing technology based on ASIC (Application-Specific Integrated Circuit) signal conditioning in a stainless steel housing. The PX2 series utilizes an on-board ASIC for comprehensive calibration ...

Introduction: The AWM5000 Series Microbridge Mass Flow Sensors feature a venturi flow housing. This series measures airflow of up to 20 standard liters per minute (SLPM) while generating a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the airflow, which greatly ...