Honeywell/Honeywell Combined Temperature Sensing HIH6130-000-001

The resistance changes with temperature. Wide range of resistance values and temperatures, package styles, and sizes. The thermistor changes its resistance with temperature. They do not amplify, correct, polarize, or generate signals. The temperature of the thermistor can change due to the ambient temperature, or the self-heating generated by the passage of electric current.

Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize on-board application-specific integrated circuits (ASICs) to provide significant impact on sensor bias, sensitivity, temperature effects, and ...

differential pressure (wet/wet, wet/dry); mV/V, 4 mA to 20 mA; ±5 Vdc，±10 Vdc； Multiple connectors and pressure ports are available; Intrinsically safe options The FP2000 series is a configurable differential pressure sensor that allows customers to choose the configuration that best meets their application needs. From...

Industrial-grade gauge pressure sensor with 1 psig to 10,000 psig output in mV/V. ±0.50% FS BFSL The Model LM pressure transducer is a cost efficient general purpose gage-only device. The sensor is available in three materials, which are ...

Operates in shock, vibration, moisture and corrosion conditions. Custom kits for a wide range of gas, liquid, and solid temperature sensing are available. These enhanced and responsive sensors are typically used to sense air, liquid immersion, and solid surface temperatures. Depending on the customer's application requirements, Honeywell's ...

Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...

Large, hermetically sealed glass bulbs with adjacent leads. -60°C to 300°C [-76°F to 572°F] The 112 series thermistors are hermetically sealed in glass. They are designed for economical and general purpose temperature measurement and control applications. After applications for applications at 300°C (572°F ...

Introduction: Honeywell HumidIcon Digital Humidity/Temperature™ Sensor, HIH6100 Series, Digital Output Type Relative Humidity (RH) and Temperature Sensor in one package. The sensor provides an accurate ±4.0 %RH level, as well as a temperature level of ±0.5 °C. ...

Introduction: Honeywell Humidicon Digital Humidity/Temperature Sensor: HIH6000 Series, I2C, ±4.5% RH accuracy, SIP 4-pin, no filter, 100 sensors on tape and reel. Give birth...

Honeywell Sensors JM1202ED3C2 Cylindrical Sensors JSM8 Series Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...

Calibrated and compensated. Compact size. High accuracy: down to ±1.5% FSS TEB. Low voltage. Absolute, or gauge. Digital output. Lead-free SMT Pressure range 60 mbar to 2.5 bar | 6 kPa to 250 kPa | 1 psi to 30 psi description MPR Series ...

Description: The HIH-5030/5031 series of low-voltage humidity sensors can operate in low-voltage environments as low as 2.7 V DC and are ideal for battery-powered systems with a typical voltage of 3 V DC. The 5030/5031 complements our existing 5 V DC SMD (Surface Mount ...

Introduction: Honeywell Humidicon Digital Humidity/Temperature Sensor: HIH6000 Series, I2C, ±4.5% RH accuracy, SIP 4-pin, no filter, 100 sensors on tape and reel. Products...

Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Introduction: AWM40000 Series Air Mass Flow Sensors, Amplified, Flow/Pressure Range: +1000 SCCM; Interface Type: Manifold. The AWM40000 series of air flow sensors is based on proven micro-bridge technology, including unamplified sensor-only devices and amplified signal designs.

Full range of industrial-grade sensors: media-isolated design, multiple ports, electrical configurations, and outputs ranging from 0 psi to 250 psi. Our sensing element design consists of four piezoresistive elements placed on a chemically etched silicon diaphragm. The change in pressure causes the diaphragm and the built-in electrical ...

The CRIR series is a single-channel, non-dispersive infrared (NDIR) sensor. The CRIR M1 and CRIR E1 have a sensing cavity with an infrared light source at one end and a detector with a filter on the other. The light source emits a wavelength of radiation that includes a CO2 absorption band. Filters block ...

Description: The 24PC SMT (Surface Mount Technology) series of pressure sensors provides a low-cost, high-value, compact pressure sensing solution for printed circuit board (PCB) use. Based on the consistent reliability and accuracy of the 26PC pressure sensor, the 24PC SMT pressure sensor can be used in ...

Honeywell Sensors JSM802UD1Y Cylindrical Sensors JSM8 Series Rated: 12VDC-24VDC Load current: ≤100mA Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: J ...

Magnetoresistive digital position sensor. Plastic threaded sleeve encapsulation. Current sink output The SR4 series magnetoresistive digital position sensors are housed in a 14 mm cylindrical plastic housing; It supports current sink output and DC power supply This article introduces the Honeywell/Honeywell value-added packaged sensor SR4 ...