Honeywell/Honeywell pressure sensor SSCDANN001PGSA3

A large number of ranges. Wet/wet, differential pressure. 17-4 PH Stainless Steel Wetted Material, 1,000 psid to 10,000 psid, 4 mA to 20 mA Output, Two-Wire (Standard) The Model 911FMD High Range Stainless Steel Wet/Wet Differential Pressure Sensor is designed for harsh industrial applications.

City Technology's Series 7 sensors are suitable for gas detection, including oxygen and toxic gases. The sensors are suitable for portable detectors, fixed detectors, and some medical gas detection. City Tech's Series 7 is suitable for including oxygen and ...

The appearance is very small. Compatible with other Honeywell 1D and 2D scan engines. Advanced imaging techniques. Multiple interfaces are supported Now you can add high-performance 2D imaging capabilities to even the smallest devices, such as small handheld scanners, smartphones, and even wearables...

Honeywell Sensors DPT0500U2-B DPT Series Air Differential Pressure Sensors Accuracy: ±1.0%FS Supply voltage: 12---30Vac/Vdc All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy ...

Description: The 24PC SMT (Surface Mount Technology) series of pressure sensors provides a low-cost, high-value, compact pressure sensing solution for printed circuit board (PCB) use. Based on the consistent reliability and accuracy of the 26PC pressure sensor, the 24PC SMT pressure sensor can be used in ...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Introduction: The AWM700 series microbridge mass flow sensors enable coaxial flow measurement with a specially designed bypass flow housing. The sensor can measure flow rates up to 200 standard liters per minute (SLPM) while typically generating a pressure drop of 1 in H2O. The AWM700 features ...

Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...

Compensatory. As low as ±0.25 %FSS TEB. Ultra-low (differential, gauge), low (absolute, differential, gauge). 24-bit digital SPI-compatible output. DIP，SMT Pressure range ± 1.6 mbar to ±10 bar, ± 160 Pa to ±1 MPa, ± 0.5 inH2 ...

Description: The RSC series is a piezoresistive silicon pressure sensor capable of taking pressure readings from either a digital output or an analog output within a specified full-scale pressure span and temperature range. Through a 24-bit analog-to-digital converter equipped with integrated EEPROM, it is possible to control sensor offset, sensitivity, temperature, etc.

Large, hermetically sealed glass bulbs with adjacent leads. -60°C to 300°C [-76°F to 572°F] The 112 series thermistors are hermetically sealed in glass. They are designed for economical and general purpose temperature measurement and control applications. After applications for applications at 300°C (572°F ...

Sensor: DPT series air pressure differential sensor All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance FeaturesSpecificationsSupply Voltage (Voltage Type)12 30 Vac/Vdc Supply Voltage( ...

Industrial-grade gauge pressure sensor with 1 psig to 10,000 psig output in mV/V. ±0.50% FS BFSL The Model LM pressure transducer is a cost efficient general purpose gage-only device. The sensor is available in three materials, which are ...

Honeywell's 13 mm series stainless steel pressure transducers are designed for high-pressure applications that require the measurement of hazardous media in harsh environments. The series features Honeywell's proven piezoresistive semiconductor sensor chips in an oil-filled isolated housing, with or without ...

Introduction: Honeywell HumidIcon Digital Humidity/Temperature™ Sensor, HIH6100 Series, Digital Output Type Relative Humidity (RH) and Temperature Sensor in one package. The sensor provides an accurate ±4.0 %RH level, as well as a temperature level of ±0.5 °C. ...

Summary: The SSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the circuit board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

HONYWELL DPT2500U1-B Sensors DPT Series Air Differential Pressure Sensors Honeywell's DT series of micro differential pressure transmitters are designed to measure differential or gauge pressure, and are available in a wide range of ranges as low as +/-50Pa and as high as 0-l0kPa, suitable for: VAC HVAC, Smart Building Energy...

Non-amplified. Absolute, gauge, vacuum gauge. Wetted parts: 316L SS; Pressure range: 0 psi to 3 psi to 0 psi to 500 psi. Ribbon cable terminals Honeywell's stainless steel 19C, 19U and 19 gauge series sensors are designed for applications that require ...

100 Ω or 1000 Ω platinum resistance temperature sensor (RTD). -75°C to 500°C, TFE Teflon or fiberglass alumina tubing with leads The HEL-700 series of thin-film platinum RTDs (Resistance Temperature Sensors) are designed to monitor critical temperatures in industrial applications. They mention ...