Introduction: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation settings. The sensor is designed to minimize malfunction caused by foreign objects. The sensor has the highest visibility and can view the action indicator from multiple directions.
Product parameters
Detection Type: Thru-beam type
Detection distance: 5mm
Detection: Opaque object
Minimum detection object: ≥ Ø0.8mm×2mm
Difference distance: ≤0.05mm
Response time
Light ON: Max.20㎲，
Dark ON: Max.100㎲
Frequency response: 2kHz
Light source: infrared LED
Light source wavelength: 940nm
Action Mode: Light ON/Dark ON (Control Line Setting)
Indicator: Operation Indicator (Red LED)
Weight: Approximately 50g
Supply voltage: 5-24VDC ±10% (ripple P-P : max. 10%）
Current consumption: Max. 30mA
Control Output: PNP Open Collector
Load voltage: ≤30VDC
Residual voltage: NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection circuit: power supply reverse connection protection circuit, output short circuit and overcurrent protection circuit
Insulation Resistance: ≥20 MΩ (250 VDC Reference)
Anti-interference: Square wave noise (pulse width 1 μs) generated by the noise simulator ± 240VDC
Withstand voltage: 1,000VAC 50/60Hz for 1 minute
Vibration resistance: 10 to 2,000 Hz in the X, Y, Z direction at an amplitude of 1.5 mm (maximum acceleration 196 m/s²) for 2 hours
Shock resistance: 15,000 m/s² (approx. 1,500 G), 3 times in the Y and Z directions
Ambient Illuminance: Fluorescent Lamp: Max.1,000lx (Receiving Surface Illuminance)
Ambient temperature: -20-55°C, storage: -25-85°C
Ambient humidity: 35-85%RH, storage: 35-85%RH
Degree of protection: IP50
Connection: Wiring lead-out type
Connection cable type: Ø3mm, 4 cores, 1m
Wire specification: AWG28 (0.08mm), 19 cores, insulator outer diameter: Ø0.88mm
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the Autonics/Autonics photoelectric sensor BS5-L1M-P through-beam products, if you are interested in Autonics/Autonics miniature photoelectric sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Autonics/Autonics Photoelectric Sensor BJX1M-DDT Diffuse Reflective Type
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics Photoelectric Sensor BH300-DDT 12-24VDC
Introduction: The BH series photoelectric sensors can be front-mounted with M18 fixing nuts and caps, or side-mounted with M3 bolts and nuts. Flexible mounting options allow for easy application in a variety of industrial environments. Sensors can be generated individually or in the same form with a simple wire configuration.
|
|
Autonics U-type photoelectric sensor BUM4-40D-W-4M
Introduction: BUM series U-shaped photoelectric sensor has 4 independent outputs, high-speed response time of less than 1ms, which can be used for highly reliable and stable state detection. Each output channel can be controlled independently and can be set up as multiple sensors. The BUM series offers excellent performance in moving parts inspection, ...
|
|
Autonics Pressure Sensor PSS-V01V-R1/8 weighs 60g
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics miniature photoelectric sensor BS5-P1MD 50g
Introduction: Regardless of the material, color or reflectivity of the target object, the BS5-P series pushbutton photoelectric sensors are capable of precise detection. Optical inspection with push-button operation ensures a higher mechanical life than traditional mechanical switches, up to 5 million operations. Contains 4 ...
|
|
Autonics miniature photoelectric sensor BS5-F1R-P 50kg
Description: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation setups. The sensor is designed to minimize malfunction caused by foreign objects. The sensor has a high visual ...
|
|
Autonics/Autonics multi-channel pressure sensor PSM series
Introduction: The PSM series multi-channel pressure indicators can display the measured values of up to 4 or 8 channels of analogue pressure sensors. When used in conjunction with our PSS series pressure sensors, the sensor type, pressure type and range can be automatically recognized without additional settings. Users can also ...
|
|
Autonics photoelectric sensor BTF1M-TDTL Ø2 mm
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics photoelectric sensor BTF30-DDTD diffuse reflective type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics Photoelectric Sensor BJX15M-TDT-P approx. 145g
Introduction: The BJX series of small photoelectric sensors have a high-performance lens with a detection distance of up to 30m. The sensor is also highly resistant to interference and has a low impact on ambient light**, allowing for accurate and reliable detection and presence. Anti-mutual interference function allows close proximity to each other.
|
|
Autonics Photoelectric Sensor BTF15-BDTD BGS Reflective Type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics BJX3M-PDT-P photoelectric sensor
Product introduction: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing ...
|
|
Autonics/Autonics Pressure Sensor PSA-01-RC1/8 1-5VDC
Introduction: The PSA series of compact digital pressure sensors features high display resolution and fast response times for optimal performance. It also has a variety of output modes and features, making it ideal for a wide range of pressure-related applications. The bright LED display enables users to quickly and easily ...
|
|
Autonics pressure sensor PSK1-C1C-R1/8 approx. 62 g
Introduction: Autonicx/Autonics PSK1 series two-stage display pressure transducers that display both the current value (PV) and the set value (SV). In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
...
|
|
Autonics BJX3M-PDT-P photoelectric sensor
Product introduction: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing ...
|
|
The Autonics photoelectric sensor BJ100-DDT weighs approximately 45 g
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics BUP-30 U-shaped photoelectric sensor
BUP Series: The U-shaped photoelectric sensor BUP series is available in 30 mm and 50 mm sensing distance models with adjustable sensitivity, extending the flexibility of various applications.
Details:
Detection Type: Thru-beam type
Detection channel: 1 channel
Detection distance: 30mm
Detect: Opaque object Min ...
|
|
Autonics/Photoelectric Sensor BEN3M-PDT Current 50mA
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. The user can also switch between Light ON and Dark ON modes using the control cable, and a sensitivity adjuster (except for thru-beam types) is included for easy setup. The use of dedicated IC to improve the anti-...
|
|
Autonics/Autonics photoelectric sensor BTF30-DDTL responds 1ms
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics/Autonics Pressure Transducer PSS-C01V-R04
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Contact
working hours
