Description: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation setups. The sensor is designed to minimize malfunction caused by foreign objects. The sensor provides high visibility and allows the action indicator to be viewed from multiple directions.
Features:
Multiple shapes for mounting flexibility (K, T, V, L, Y, F, R, TA)
Minimize detection errors and improve visibility
- By minimizing the horizontal difference between the detection surface and the main body, malfunctions caused by foreign objects are minimized
- Added an action indicator that can be viewed from multiple directions
Depending on the model, you can select the ON when the light is in or ON when the light is blocked
Extremely high resistance to shocks and vibrations
- Shock: 15,000 m/s² (approx. 1,500G), Vibration: 10 – 2,000 Hz (1.5 amplitude)
Use the control terminals/wires to switch between Light ON and Dark ON modes
High-speed response frequency: 2kHz
Product parameters
Detection Type : Thru-beam type
Detection distance: 5mm
Detection: Opaque object
Minimum detection object : ≥Ø0.8mm×2mm
Difference distance: ≤0.05mm
Response Time :
Light ON: Max.20㎲，
Dark ON: Max.100㎲
Frequency response: 2kHz
Light source : IR LED
Light source wavelength: 940nm
Action Mode : Light ON/Dark ON (Control Line Setting)
Indicator: Operation Indicator (Red LED)
Weight: about 50kg
Supply voltage: 5-24VDC ±10% (ripple P-P : max. 10%）
Current consumption: Max. 30mA
Control Output: PNP Open Collector
Load voltage: ≤30VDC
Residual voltage: NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection circuit: power supply reverse connection protection circuit, output short circuit and overcurrent protection circuit
Insulation Resistance: ≥20 MΩ (250 VDC Reference)
Anti-interference: Square wave noise (pulse width 1 μs) generated by the noise simulator ± 240VDC
Withstand voltage: 1,000VAC 50/60Hz for 1 minute
Vibration resistance: 10 to 2,000 Hz in the X, Y, Z direction at an amplitude of 1.5 mm (maximum acceleration 196 m/s²) for 2 hours
Shock resistance: 15,000 m/s² (approx. 1,500 G), 3 times in the Y and Z directions
Ambient Illuminance: Fluorescent Lamp: Max.1,000lx (Receiving Surface Illuminance)
Ambient temperature: -20-55°C, storage: -25-85°C
Ambient humidity: 35-85%RH, storage: 35-85%RH
Degree of protection: IP50
Connection: Wiring lead-out type
Connection cable type: Ø3mm, 4 cores, 1m
Wire specification: AWG28 (0.08mm), 19 cores, insulator outer diameter: Ø0.88mm
Material: Case: PBT, Detection Unit: PC
This article introduces Autonics/Autonics miniature photoelectric sensor BS5-F1R-P products, if you are interested in Autonics/Autonics miniature photoelectric sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Autonics Photoelectric Sensor BJR3M-PDT Red LED
Introduction: The BJR series is an oil-resistant/oil-proof photoelectric sensor, which is suitable for various environments such as cutting oil and lubricating oil, such as the automotive and machine tool industries. The maximum detection distance is up to 15 m (through-beam type), and various functions such as M.S.R (mirror suppression) and anti-mutual interference are available to achieve stable and error-free ...
|
|
Autotonix/Autonics sensor PSK1-C01CP-R1/8 combined pressure
Introduction: The PSK1 series is a two-stage display pressure sensor that can display both the current value (PV) and the set value (SV). In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
Give birth...
|
|
The Autonics photoelectric sensor BJ10M-TDT-C weighs 20g
Introduction: The BJ series of multi-functional photoelectric sensors uses high-performance lenses to achieve long-distance detection, excellent anti-interference characteristics and external light reduction functions, and achieve the world's highest detection performance. There is also a built-in anti-mutual interference function for tight installation, compact design, ...
|
|
Autonics Photoelectric Sensor BJ3M-PDT 12-24VDC
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics photoelectric sensor BUP-30S-P 30mm
Introduction: Reinforced plastic shell U-shaped photoelectric sensor BUP series, the best to prevent external light interference, improve detection performance, fast response speed (less than 1ms), through the mounting bracket can achieve multi-directional installation, increase the user's choice space.
...
|
|
Autonics photoelectric sensor BJX10M-TDT-C-P 65g
Introduction: The BJX series of small photoelectric sensors have a high-performance lens with a detection distance of up to 30m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function allows close proximity to each other.
|
|
Autonics/Autonics pressure sensor PSK2-C1CNV-R1/8
Introduction: Autonics/Autonics PSK2 series 2-segment display pressure transducer can display the current value (PV) and set value (SV) at the same time, and can also switch between red and green colors according to the setting and status. Not only can the setting status be displayed, but also the power-saving mode and fine-tuning function are provided to ...
|
|
Autonics/Autonics photoelectric sensor BJX3M-PDT-P detects 3m
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics/Autonics pressure sensor PSS-C01V-R1/8
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
The Autonics pressure sensor PSB-01-M5 weighs approximately 160g
Description: The PSB series of compact digital pressure sensors features high display resolution and fast response times for optimal performance. It also has a variety of output modes and features, making it ideal for a wide range of pressure-related applications. The bright LED display enables users to quickly and easily ...
|
|
Autonics Photoelectric Sensor BUP-30 U-Type Ø4mm
Introduction: Reinforced plastic shell U-shaped photoelectric sensor BUP series, effectively prevent external light interference, improve detection performance, fast response speed (less than 1ms), through the mounting bracket can achieve multi-directional installation, increase the user's choice space.
...
|
|
Autonics Photoelectric Sensor BJP100-BDT BGS Reflective Type
Introduction: The BJP series photoelectric sensors are optimized for printed circuit board (PCB) inspection with a 30 mm x 3 mm rectangular beam and background suppression (BGS) detection method. The sensor can be stably detected without being affected by holes, grooves, incomplete machining or protrusions on the PCB.
|
|
Autonics/Autonics Photoelectric Sensor BR400-DDT Diffuse Reflective Type
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics/Autonics multi-channel pressure sensor PSM series
Introduction: The PSM series multi-channel pressure indicators can display the measured values of up to 4 or 8 channels of analogue pressure sensors. When used in conjunction with our PSS series pressure sensors, the sensor type, pressure type and range can be automatically recognized without additional settings. Users can also ...
|
|
Autonics Photoelectric Sensor BH300-DDT 12-24VDC
Introduction: The BH series photoelectric sensors can be front-mounted with M18 fixing nuts and caps, or side-mounted with M3 bolts and nuts. Flexible mounting options allow for easy application in a variety of industrial environments. Sensors can be generated individually or in the same form with a simple wire configuration.
|
|
Autonics Photoelectric Sensor BM1M-MDT Reflective Type
Introduction: BM series photoelectric sensors are easy to install and use in a variety of industrial applications. The sensor has built-in reverse power supply protection and a diffuse reflective version with a built-in sensitivity regulator. BM series photoelectric sensors have a variety of detection modes (through-beam type/specular type/diffuse type), ...
|
|
Autonics Photoelectric Sensor BL Series Ø6~13mm
Introduction: BL series liquid level detection sensor can detect liquid level through transparent/translucent tubes with an outer diameter of Ø6-13mm and a thickness of 1mm. Select the Light ON/Dark ON action mode by pressing the button, and the LED indicator (red/green) on the back of the product can easily confirm the product's ...
|
|
Autonics/Autonics Pressure Sensor PSS-01V-R1/8 Compact
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics Displacement Sensor BD-CRS 91g
Introduction: BD-C series communication converter is used for RS232C/RS485 communication of BD series laser displacement sensor. By connecting the sensor amplifier unit with a side connector, the communication converter can be powered. atDisplacement laser displacement sensor software allows users to switch without connecting ...
|
|
Autonics/Autonics BD Series Laser Displacement Sensors
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier single ...
|
|
Contact
working hours
