Introduction: The PSA series of compact digital pressure sensors features high display resolution and fast response times for optimal performance. It also has a variety of output modes and features, making it ideal for a wide range of pressure-related applications. The bright LED display allows the user to quickly and easily identify the pressure level and status.
Features:
High-precision digital pressure sensor
Bright red LED display (character height: 9.5 mm)
High display resolution: negative pressure 0.1 kPa / standard pressure 0.1 kPa, 1 kPa / compound pressure 0.2 kPa
Unit conversion function
- Negative, combined pressure: kPa, kgf/cm², bar, psi, mmHg, mmH₂O, inHg
- Standard pressure: kPa, kgf/cm², bar, psi
Multiple output modes: Hysteresis mode, auto sensitivity setting mode, independent 2 output mode, compare output mode
Anti-output jitter function (response time: 2.5 ms, 5 ms, 100 ms, 500 ms)
Analog output capability (1-5 VDC)
Zero-point adjustment function
Peak and valley hold function
Built-in reverse polarity protection circuit, overcurrent protection circuit
Product parameters
Applicable liquids: air, non-corrosive gases
Pressure connection: Direction rear connection (3 directions)
Pressure Connection: Standard (Pneumatic Type)
Connection Cable Type: Cable Type (Cable: 2m)
Pressure Type: Positive Pressure
Rated pressure range: 0.0-100.0kPa
Displayed pressure units: kPa, kgf/cm², bar, psi
Control output _NPN: Open collector NPN open collector
Selectable Inputs/Outputs: Voltage (1-5VDC) outputs
Power supply voltage: 12-24VDC±10% (ripple P-P: Max.10%)
Current consumption: Max.50mA
Degree of protection: IP40
Control Output_Hysteresis Value: 1 bit fixed (psi unit 2 bits)
Control Output_Repeatability: ±0.2% F.S. ±1 bit
Control output_response time: 2.5ms, 5ms, 100ms, 500ms optional
Ambient temperature: -10-50°C, Storage: -20-60°C
Ambient humidity: 35-85%RH, storage: 35-85%RH
Material: Front, Rear Housing: PC (with glass), Pressure connection: Die-cast (zinc)
Weight: Approximately 200 g (approximately 120 g)
This article introduces Autonics/Autonics pressure sensor PSA-01-RC1/8 1-5VDC, if you are interested in Autonics/Autonics pressure sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Autonics Photoelectric Sensor BX700-DDT Diffuse Reflective Type
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. Built-in timer for ON delay, OFF delay and one-shot delay. Users can also switch between Light ON and Dark ON modes using the control cable, and sensitivity ...
|
|
Autonics BUP-30 U-shaped photoelectric sensor
BUP Series: The U-shaped photoelectric sensor BUP series is available in 30 mm and 50 mm sensing distance models with adjustable sensitivity, extending the flexibility of various applications.
Details:
Detection Type: Thru-beam type
Detection channel: 1 channel
Detection distance: 30mm
Detect: Opaque object Min ...
|
|
Autonics photoelectric sensor BR20M-TDTD Ø15mm
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
The Autonics photoelectric sensor BJ100-DDT weighs approximately 45 g
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics/Autonics Photoelectric Sensor BR400-DDT Diffuse Reflective Type
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics Displacement Sensor BD-CRS 91g
Introduction: BD-C series communication converter is used for RS232C/RS485 communication of BD series laser displacement sensor. By connecting the sensor amplifier unit with a side connector, the communication converter can be powered. atDisplacement laser displacement sensor software allows users to switch without connecting ...
|
|
Autonics/Autonics Photoelectric Sensor BJX1M-DDT Diffuse Reflective Type
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics Sensor BD-030 30mm pluggable type
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
Autonics Photoelectric Sensor BTF15-BDTD BGS Reflective Type
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics photoelectric sensor BJ300-DDT weighs about 45g
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics photoelectric sensor BRQP400-DDTA is about 60 g
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics photoelectric sensor BJX100-DDT-C-P 60g
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics/Autonics multi-channel pressure sensor PSM series
Introduction: The PSM series multi-channel pressure indicators can display the measured values of up to 4 or 8 channels of analogue pressure sensors. When used in conjunction with our PSS series pressure sensors, the sensor type, pressure type and range can be automatically recognized without additional settings. Users can also ...
|
|
Autonics Photoelectric Sensor BS5-P1ML Pushbutton Type
Introduction: Regardless of the material, color or reflectivity of the target object, the BS5-P series pushbutton photoelectric sensors are capable of precise detection. Optical inspection with push-button operation ensures a higher mechanical life than traditional mechanical switches, up to 5 million operations. Contains 4 ...
|
|
Autonics Photoelectric Sensor BM1M-MDT Reflective Type
Introduction: BM series photoelectric sensors are easy to install and use in a variety of industrial applications. The sensor has built-in reverse power supply protection and a diffuse reflective version with a built-in sensitivity regulator. BM series photoelectric sensors have a variety of detection modes (through-beam type/specular type/diffuse type), ...
|
|
Autonics Photoelectric Sensor BJ3M-PDT 12-24VDC
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Autonics Photoelectric Sensor BR3M-MDT Specular Reflective Type
Introduction: Cylindrical (Ø18mm) photoelectric sensor BR series, to achieve long-distance detection (20m), high-speed response time (less than 1ms). Advanced digital signal processing is adopted, and the anti-interference performance is stronger. The BR series has 4 different detection methods, increasing the user's choice of application ...
|
|
Autonics/Autonics pressure sensor PSS-C01V-R1/8
Introduction: PSS series analog pressure sensor is small in size, compact in structure (W11.8 X H29.3 XD24.8mm, including pressure interface), adopts analog voltage/current output, can be directly connected with HMI, PC, PLC, and has a wide rated pressure range, suitable for various working environments.
...
|
|
Autonics/Autonics photoelectric sensor BS5-L1M-P through-beam type
Introduction: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation settings. The sensor is designed to minimize malfunction caused by foreign objects. The sensor has the highest visibility ...
|
|
Autonics Photoelectric Sensor BJX15M-TDT-P approx. 145g
Introduction: The BJX series of small photoelectric sensors have a high-performance lens with a detection distance of up to 30m. The sensor is also highly resistant to interference and has a low impact on ambient light**, allowing for accurate and reliable detection and presence. Anti-mutual interference function allows close proximity to each other.
|
|
Contact
working hours
