Introduction: Autonics/Autonics PSK2 series 2-segment display pressure transducer can display the current value (PV) and set value (SV) at the same time, and can also switch between red and green colors according to the setting and status. In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
Features:
Can be used in all gaseous atmospheres
*Excludes copper-nickel corroded environments
Rated pressure range (negative, compound)
*Compound pressure: -100.0 - 1,000 kPa, -100.0 - 100.0 kPa
*Negative pressure: -101.3 - 0.0 kPa
The two-stage display type can display both the current value (PV) and the set value (SV) at the same time.
The current value (PV) can be displayed in 2 colors (red, green)
Power saving mode saves power consumption
You can set a password for the set value
The fine-tuning function eliminates pressure errors and corrects current values
Product parameters
Applicable liquids: air, non-corrosive, non-flammable gases
Pressure connection: R1/8
Connection Cable Type: Pluggable Type
Pressure Type: Negative Pressure
Rated pressure range: -100.0-100.0kPa
Control Output: PNP Open Collector Output
Power supply voltage: 12-24VDC±10% (ripple P-P: Max.10%)
Current consumption: Max. 40mA
Degree of protection: IP40
Control output_response time: ≤ 2.5 ms (malfunction prevention function: 25 ms, 100 ms, 250 ms, 500 ms, 1000 ms, 1500 ms selectable)
Ambient temperature: 0-50°C
Ambient humidity: 35-85%RH, storage: 35-85%RH
Materials: Front shell: PA66 + G15%, Rear shell: PA66 + G15%, Pressure connection: Brass - nickel plated
Weight: Approx. 67g (including 2m wire)
This article introduces the Autonics/Autonics pressure sensor PSK2-V01CPV-R1/8 products, if you are interested in Autonics/Autonics pressure sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Autonics Sensor BD-030 30mm pluggable type
Introduction: BD series laser displacement sensor can measure the thickness, width, horizontal difference, parallax, bending, flatness of the target object by detecting the amount of displacement. Regardless of the target color or material, the sensor provides accurate and stable measurement results. Sensor head and amplifier unit ...
|
|
Autonics miniature photoelectric sensor BS5-V2R-P approx. 30g
Description: The BS5 series of miniature photoelectric sensors are available in 8 different form factors (K, T, V, L, Y, F, R, TA) to provide maximum flexibility for a wide range of user applications and installation setups. The sensor is designed to minimize malfunction caused by foreign objects. The sensor has a high visual ...
|
|
Autonics U-type photoelectric sensor BUM4-40D-W-4M
Introduction: BUM series U-shaped photoelectric sensor has 4 independent outputs, high-speed response time of less than 1ms, which can be used for highly reliable and stable state detection. Each output channel can be controlled independently and can be set up as multiple sensors. The BUM series offers excellent performance in moving parts inspection, ...
|
|
Autonics Photoelectric Sensor BH300-DDT 12-24VDC
Introduction: The BH series photoelectric sensors can be front-mounted with M18 fixing nuts and caps, or side-mounted with M3 bolts and nuts. Flexible mounting options allow for easy application in a variety of industrial environments. Sensors can be generated individually or in the same form with a simple wire configuration.
|
|
Autonics Photoelectric Sensor BUP-30 U-Type Ø4mm
Introduction: Reinforced plastic shell U-shaped photoelectric sensor BUP series, effectively prevent external light interference, improve detection performance, fast response speed (less than 1ms), through the mounting bracket can achieve multi-directional installation, increase the user's choice space.
...
|
|
Autonics photoelectric sensor BYD3M-TDT-P through-beam type
Introduction: The BYD series of small amplifier built-in photoelectric sensors are extremely cost-effective, and their compact size and various detection methods (through-beam, diffuse, and limited distance reflection) make them ideal for a wide range of user applications. In addition, BYD30-DDT-you and BYD50-DDT-U...
|
|
The Autonics photoelectric sensor BJ10M-TDT-C weighs 20g
Introduction: The BJ series of multi-functional photoelectric sensors uses high-performance lenses to achieve long-distance detection, excellent anti-interference characteristics and external light reduction functions, and achieve the world's highest detection performance. There is also a built-in anti-mutual interference function for tight installation, compact design, ...
|
|
Autonics Photoelectric Sensor BX700-DDT Diffuse Reflective Type
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. Built-in timer for ON delay, OFF delay and one-shot delay. Users can also switch between Light ON and Dark ON modes using the control cable, and sensitivity ...
|
|
The Autonics/Autonics photoelectric sensor BC15-LDT-C has a response of 500μs
Introduction: The BC series of color scale sensors provide excellent color matching accuracy for highly reliable and stable color detection. The sensor uses a 12-bit RGB 3-color LED light source to determine the presence or absence of an object by comparing the set color with the detected color. Contains 2 detection modes, each with 3 ...
|
|
Autonics pressure sensor PSK1-C1C-R1/8 approx. 62 g
Introduction: Autonicx/Autonics PSK1 series two-stage display pressure transducers that display both the current value (PV) and the set value (SV). In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
...
|
|
Autotonix/Autonics sensor PSK1-C01CP-R1/8 combined pressure
Introduction: The PSK1 series is a two-stage display pressure sensor that can display both the current value (PV) and the set value (SV). In addition to displaying the setting status, it also provides a power-saving mode and a fine-tuning function to improve the user's convenience.
Give birth...
|
|
Autonics/Autonics photoelectric sensor BTF30-DDTL responds 1ms
Introduction: The ultra-thin photoelectric sensors of the BTF series are ideal for installation in limited space and compact applications. With a thickness of only 3.7 mm and a built-in amplifier, the sensor is capable of detecting tiny objects such as metal wires and semiconductor chips. The BTF series also adopts IP67 protective structure and stainless steel safety ...
|
|
Autonics/Autonics photoelectric sensor BRQPS700-DDTA-P
Introduction: Ø18mm cylindrical photoelectric sensor BRQ series products are divided into front and side detection types according to the detection method, and are divided into plastic, metal (brass nickel plated), and SUS316L materials according to the material, which can meet the needs of users in a variety of environments. The maximum detection distance of this product can reach 30m, with ...
|
|
Autonics photoelectric sensor BJX100-DDT-C-P 60g
Description: The BJX series of small photoelectric sensors has a high-performance lens with a detection distance of up to 30 m. The sensor also has excellent immunity to interference and has little impact on ambient light, allowing for accurate and reliable detection and presence. Anti-mutual interference function, allowing close ...
|
|
Autonics/Photoelectric Sensor BEN3M-PDT Current 50mA
Introduction: The built-in photoelectric sensor of BEN series amplifier can be divided into AC/DC general type and DC type. The user can also switch between Light ON and Dark ON modes using the control cable, and a sensitivity adjuster (except for thru-beam types) is included for easy setup. The use of dedicated IC to improve the anti-...
|
|
Autonics/Autonics Pressure Sensor PSA-01-RC1/8 1-5VDC
Introduction: The PSA series of compact digital pressure sensors features high display resolution and fast response times for optimal performance. It also has a variety of output modes and features, making it ideal for a wide range of pressure-related applications. The bright LED display enables users to quickly and easily ...
|
|
Autonicx/Autonics Fiber Optic Sensor BF5R-D1-N Dual Display
Introduction: BF5 Series Single/Dual Display Fiber Optic Amplifier BF5 Series has 5 different response speed settings to achieve a high resolution of 1/10,000, which can easily realize the function of detecting high-speed moving objects as well as small objects. In addition, the product can achieve 8 ...
|
|
Autonics level detection sensor BL13-TDT through-beam type
Introduction: BL series liquid level detection sensor can detect liquid level through transparent/translucent tubes with an outer diameter of Ø6-13mm and a thickness of 1mm. The Light ON/Dark ON action mode can be selected by pressing the button, and the LED indicator (red/green) on the back of the product can be used to easily confirm the product.
|
|
Autonics/Autonics pressure sensor PSAN-V01CV-RC1/8
Introduction: The PSAN series of digital display pressure sensors can measure and display various types of pressure, including gases, liquids and oils. The automatic switching feature adjusts the pressure level to accommodate changes in the original pressure, providing a stable and accurate output. The sensor also has a variety of user-friendly ...
|
|
Autonics Photoelectric Sensor BJ3M-PDT 12-24VDC
Introduction: BJ series high-performance photoelectric sensors have excellent anti-interference performance, effectively prevent the influence of external light, and achieve ideal detection performance. Light ON/Dark ON action mode switch and sensitivity adjuster for easy setup (except BJG-DDT). BJ series has a variety of detection modes ...
|
|
Contact
working hours
