FujiElectric ZPA Single Beam Infrared Gas Analyzer

FujiElectric ZPA Single Beam Infrared Gas Analyzer

  peculiarity

   Mounted in a 19-inch cabinet, it weighs about 10kg, making it compact and lightweight.

   Enables continuous measurement of the concentration of up to 5 gases.

   Built-in magnetic or electrochemical oxygen analyzer, external zirconia oxygen analyzer (optional).

   Built-in air pressure disturbance compensation, RS-485 communication, automatic correction, alarm output, O2 conversion and other functions (optional).

   The measuring parts are simple in structure and easy to maintain.

   Main specifications:

Measuring principle		NO, SO2, CO, CO2, CH4: Non-dispersive infrared absorption method (single beam) O2: Electrochemical (built-in) or magnetic (built-in) or zirconia (ZFK7 type external)
Measurement composition and measuring range		NO：0～200ppm···5000ppm SO2：0～200ppm···10vol% CO2：0～100ppm···100vol% CO：0～200ppm···100vol% CH4：0～500ppm···100vol% O2 (built-in electrochemistry): 0~10vol%··· 25vol% O2 (built-in magnetic type): 0~5vol%··· 100vol% or 100~95vol% O2 (external zirconia type): 0~5vol%··· 25vol%
Measuring range		1 component up to 2 ranges
repeatability		±0.5%FS
Linear		±1%FS
Zero drift		±2% FS/week (0~500ppm NO, SO2 is ±2%FS/day)
Full-scale drift		±2% FS/week
Response time (within 90%)		Within 10~30 seconds (according to the measurement range)
Analog output signal		DC4~20mA or DC0~1V
Measured values are displayed		LCD with backlight (Japanese, English or Chinese: as specified) Instantaneous values of each component, O2 to instantaneous values, O2 to average values, O2 to average values
Spanning switching		Manual and automatic range switching is possible by pressing a button, and remote switching is possible with external contact input (optional).
External contact input (optional)		Voltage input contact (supply voltage DC12~24V, maximum current 15mA) Remote range switching, auto-correction remote start, remote output hold, average value reset
Contact output (optional)		1c relay contact (contact capacity DC24V/1A resistive load) Instrument abnormality, correction abnormality, range identification, automatic calibration, automatic correction is driven by solenoid valve, Upper and lower limit alarms, CO concentration peak alarms
Barometric Disturbance Compensation (Optional)		Built-in as specified
Standard features		Output signal holds, manual/automatic range switching
Optional features		Auto-Calibration, Auto-Calibration Remote Start, Remote Output Hold, Range Identification Contact Output, Upper and lower limit alarm output, O2 conversion value output, O2 conversion average value output, average value reset contact output, CO concentration peak alarm contact output
Communication function (optional)		RS-485 (Modbus) (9-pin D-sub output) Half-duplex serial, synchronous start and stop
Size of gas inlet and outlet		Rc1/4 or NPT1/4 female
Purge gas flow		1L/min (as required)
Ambient temperature and humidity		-20~60°C 90% or less (no condensation)
Supply voltage		AC100V～240V　50/60Hz
Rated power		Approx. 100VA
Dimensions		133（H）×483（W）×382（D）mm
weight		Approx. 10kg
Applicable certifications		CE marked
The condition of the gas being measured	flow rate	0.5L / min ±0.2L / min
	temperature	0 ～ 50℃
	pressure	10kPa or less
	dust	Particles below 0.3 μm: 100 μg/Nm3 or less
	Aerosol	not
	moisture content	Within the saturation range at room temperature (no condensation) However, when the NO, SO2, and CO analyzers measure concentrations of 0 ~ 200ppm, they cannot exceed 2°C saturation (no condensation)
	Corrosive components	HCL 1ppm or less

This article introduces FujiElectric ZPA single beam infrared gas analyzer products, if you are interested in Fuji Electric, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow!

FujiElectric ZPA Single Beam Infrared Gas Analyzer

Sections viewed

Contact

working hours