FujiElectric ZPG Single Beam Infrared Gas Analyzer
peculiarity
High stability: zero drift±0.5%FS/week.
Installed in a 19-inch cabinet, it weighs about 9kg, making it compact and lightweight.
Enables continuous measurement of low gas concentrations.
Built-in magnetic oxygen analyzer or amperometric oxygen analyzer (optional).
Built-in air pressure disturbance compensation, RS-485 communication, automatic correction, alarm output, O2 conversion and other functions (optional).
The measuring parts are simple in structure and easy to maintain.
Main specifications:Measuring principle | NO, SO2, CO, CO2, CH4: Non-dispersive infrared absorption method (single beam)
O2: Electrochemical (built-in) or magnetic (built-in) or zirconia (external ZFK7) | Measurement composition and measuring range | NO：0～10ppm···100ppm
SO2：0～10ppm···100ppm
CO2：0～5ppm···50ppm
CO：0～5ppm···50ppm
O2 (built-in electrochemical formula): 0~10vol%··· 25vol%
O2 (built-in magnetic type): 0~5vol%··· 100vol%
O2 (external zirconia type): 0~5vol%··· 25vol% | Measuring range | 1 component up to 2 ranges | repeatability | ± 0.5% FS or less | Linear | ± within 1% FS | Zero drift | ± 0.5% FS/week | Full-scale drift | ±2% FS/week | Response time (within 90%) | Within 30 seconds (Consumption time varies depending on the gas switching time) | Analog output signal | DC4~20mA or DC0~1V | Measured values are displayed | LCD with backlight (Japanese, English or Chinese: as specified)
Instantaneous values of each component, O2 to instantaneous values, O2 to average values, O2 to average values | Spanning switching | Manual and automatic range switching is possible by pressing a button, and remote switching is possible with external contact input (optional). | External contact input (optional) | Voltage input contact (supply voltage DC12~24V, maximum current 15mA)
Remote range switching, auto-correction remote start, remote output hold, average value reset | Contact output (optional) | 1c relay contact (contact capacity DC24V/1A resistive load)
Instrument abnormality, correction abnormality, range identification, automatic calibration, automatic correction is driven by solenoid valve,
Upper and lower limit alarms, CO concentration peak alarms | Barometric Disturbance Compensation (Optional) | Built-in as specified | Standard features | Output signal holds, manual/automatic range switching | Optional features | Auto-Calibration, Auto-Calibration Remote Start, Remote Output Hold, Range Identification Contact Output,
Upper and lower limit alarm output, O2 conversion value output, O2 conversion average value output, average value reset contact output,
CO concentration peak alarm contact output | Communication function (optional) | RS-485 (Modbus) (9-pin D-sub output) Half-duplex serial, synchronous start and stop | Gas flow monitor under test | Yes | Size of gas inlet and outlet | Rc1/4 or NPT1/4 female | Purge gas flow | 1L/min (as required) | Reference gas | Required (Dry N2 or Dry Air) | Ambient temperature and humidity | -20~60°C 90% or less (no condensation) | Supply voltage | AC100V～240V 50/60Hz | Rated power | Approx. 100VA | Dimensions | 133（H）×483（W）×382（D）mm | weight | Approx. 10kg | Applicable certifications | CE marked | The condition of the gas being measured | flow rate | 1.0L / min ±0.2L / min | temperature | 0 ～ 50℃ | pressure | 10kPa or less | dust | Particles below 0.3 μm: 100 μg/Nm3 or less | Aerosol | not | moisture content | Saturation cannot exceed 2°C (the same as the measured gas and the reference gas) | Corrosive components | HCL 1ppm or less |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow!
In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
FujiElectric V9071iW Human Machine Interface (HMI)
Introduction: FujiElectric V9071iW Human Machine Interface (HMI) 7-inch, TFT, 16.7M Color, WVGA, 3ch Serial, SD I/F, A/mini B USB, COM I/F
Product Picture Show:
Specifications:
The above introduction ...
|
|
FujiElectric V9080iC Human Machine Interface (HMI)
Introduction: FujiElectric V9080iC HMI 8.4 inches, TFT, 16.7M color, SVGA, 3ch serial, SD I/F, A/mini B USB, COM I/F, LAN 1ch
Product Picture Show:
Specifications:
Above...
|
|
FujiElectric ZAFE Pressure-Resistant Explosion-proof Thermal Gas Analyzer
FujiElectric ZAFE Pressure-Resistant Explosion-proof Thermal Gas Analyzer
peculiarity
NEPSI certified qualified product (Exd II.C T6Gb).
Large, easy-to-see LCD display.
Can communicate with a computer.
Small panels ...
|
|
FujiElectric PHN Paperless Recorder
Introduction: FujiElectric PHN Paperless Recorder for fast display of past dataStandard equipped with computer support software communication function screen saver Compact specifications 3 points, 6 points, 9 points of recording and up to 12 points of recording
Product Picture Show:
Give birth...
|
|
FujiElectric PHA inkjet recorder
Introduction: FujiElectric PHA inkjet recorder is a 180mm paper width recorder with 6 colors of inkjet, vivid recording, and inkjet method. Thermocouples, temperature resistors, and voltage/current signals are used as inputs
Product Picture Show:
Key Specifications:
...
|
|
FujiElectric ZSVF compact gas analyzer
FujiElectric ZSVF compact gas analyzer
peculiarity
It is suitable for measuring the concentration of NOx, SO2, CO, CO2, CH4, O2 gas in exhaust, gas, plant photosynthesis, biogas, etc
It is possible to measure simultaneously for 5 consecutive days ...
|
|
FujiElectric TS1100/TS1101 series HMI
Introduction: FujiElectric TS1100/TS1101 series Human Machine Interface (HMI) Display Size 10.2 inch widescreen Display resolution 800×480 dots Display device TFT color Power consumption 16w
Product Picture Show:
Specifications:
...
|
|
FujiElectric PHE inkjet recorder
Introduction: FujiElectric PHE inkjet recorder with 6-color vivid recording / inexpensive type, abundant measurement objects, compact size, ideal for assembly into machinery and equipment, high-quality recording
Product Picture Show:
Product Features and Advantages:
...
|
|
FujiElectric ZAF Thermal Conductivity Gas Analyzer
FujiElectric ZAF Thermal Conductivity Gas Analyzer
peculiarity
Large, easy-to-see LCD display.
Can communicate with a computer.
Compact panel mounting structure.
Automatic correction function for zero point and full-scale point (optional)
|
|
FujiElectric ZKG Magnetic Oxygen Analyzer
FujiElectric ZKG Magnetic Oxygen Analyzer
peculiarity
Magnetic method (pressure detection type) eliminates the need for auxiliary gases.
The detection part does not have heating parts such as heaters, and is suitable for oxygen measurement in flammable gases.
Almost unaffected by other ...
|
|
FujiElectric ZKM zirconia gas analyzer
Introduction: FujiElectric ZKM zirconia gas analyzer
peculiarity
Zirconia sensors can be replaced and maintenance is simple.
4~7 seconds of rapid ringing ...
|
|
FujiElectric FLR compact ultrasonic flowmeter
FujiElectric FLR compact ultrasonic flowmeter
peculiarity
Standard accuracy of 1.5% of rate (optional 1% of rate)
Fast response in just 0.2 seconds
It is not necessary to open the inverter housing, and it can be accessed from ...
|
|
FujiElectric PHC type 6 color inkjet recorder
Introduction: FujiElectric PHC type 6 color inkjet recorder, inkjet method 100mm paper width recorder, clear recording, thermocouple, temperature measurement resistance, voltage/current signal as input
Product Picture Show:
Main features of the product:
...
|
|
FujiElectric ZKJ Infrared Gas Analyzer
FujiElectric ZKJ Infrared Gas Analyzer
peculiarity
It is suitable for measuring the concentration of NOx, SO2, CO, CO2, CH4, and O2 gases in incinerators, combustion exhaust gases, and various industrial furnaces
Up to 5 components of the gas concentration can be continuously ...
|
|
FujiElectric/Fuji TS1070S/TS1100S Human Machine Interface (HMI)
Introduction: FujiElectric/Fuji TS1070S/TS1100S Human Machine Interface (HMI) supports remote operation through VNC server function, and supports various specifications as standard, and the FROM capacity has been greatly expanded by 2.2 times.
Product Picture Show:
Specifications:
...
|
|
FujiElectric V9150iX Human Machine Interface (HMI)
Introduction: FujiElectric V9150iX Human Machine Interface (HMI) 15-inch, TFT, 16.7M Color, XGA, 3ch Serial, SD I/F, A/mini B USB, COM I/F, LAN 1ch, Audio
Product Picture Show:
Specifications:
...
|
|
FujiElectric V9100iS Human Machine Interface (HMI)
Introduction: FujiElectric V9100iS Human Machine Interface (HMI) 10.4 inches, TFT, 16.7M color, XGA, 3ch serial, SD I/F, A/mini B USB, COM I/F, LAN 1ch, Audio
Product Picture Show:
Specifications:
...
|
|
FujiElectric ZSS in-line laser gas analyzer
FujiElectric ZSS in-line laser gas analyzer
peculiarity
Analyzer for HCL, NH3, O2, CO, CO2, CH4 gas concentration measurement.
Due to the fast response speed (less than 1~5 seconds), it can be assembled into the control system.
|
|
FujiElectric FSC Portable Ultrasonic Flow Meter
FujiElectric FSC Portable Ultrasonic Flow Meter
peculiarity
An SD memory card can be used to store data for long-term measurements
With calorie consumption function
Rely on battery power for 12 hours of continuous work
With printer (optional ...
|
|
FujiElectric UG20 Series POD
Introduction: FujiElectric UG20 series POD
Product Introduction
●I adopt medium-to-large 7.7 inches of 128-color STN color LCD
7.7 type VGA (640 480 dots) 128 colors STN display color liquid ...
|
|
Contact
working hours
