FujiElectric ZSVF compact gas analyzer

FujiElectric ZSVF compact gas analyzer

FujiElectric ZSVF type

   peculiarity

   It is suitable for measuring the concentration of NOx, SO2, CO, CO2, CH4, O2 gas in exhaust, gas, plant photosynthesis, biogas, etc

   Gas concentrations of up to 5 components can be measured simultaneously for up to 5 consecutive days.

   The detached structure allows the analysis and sampling parts to be set up separately.

   It has a wide range of functions, such as automatic correction, O2 conversion output, average value output, and automatic display off.

   The large, easy-to-see liquid crystal display enables simultaneous monitoring of concentration changes in five components.

   The large display makes it extremely easy to operate.

   There are two types of instruments for detecting O2, a magnetic oxygen analyzer and an electrochemical oxygen analyzer.

    Main specifications:

Measuring principle	Non-dispersive infrared method: NOX, SO2, CO, CO2, CH4 Magneto-oxygen or electrochemical formula: O2
Measure the components	One group: NOX, SO2, CO, CO2, CH4 Two components: NOX+SO2, CO2+CO, CH4+CO, CO2+CH4, NOX+CO Three components: NOX+SO2+CO, NOX+SO2+CO2, NOX+CO2+CO, SO2+CO2+CO, CH4+CO2+CO Four components: NOX+SO2+CO+CO2 O2 can be attached to each component.
Measuring range	NOX：0～500ppm···5000ppm SO2：0～500ppm···1％ CO：0～200ppm···100％ CO2：0～200ppm···100％ CH4：0～1000ppm···100％ O2：0～5％···25％
Measuring range	3 ranges (maximum volume ratio of 1:5)
repeatability	±0.5%FS
Zero drift	Not more than ±1.0% FS/day
Full-scale drift	Not more than ±1.0% FS/day
Linearity	±2.0%FS
Response time	Less than 50 seconds (90% response) at the latest, but less than 3 minutes for SO2 analyzers and electrochemical O2 analyzers
Output signal	Each DC4~20mA (linear) or DC0~1V (linear), up to 8 outputs, non-isolated (Instantaneous value output for each measured concentration, O2 conversion instantaneous value, O2 conversion average)
display	LCD display with backlight, Japanese or English
function	Automatic zero point correction, O2 conversion calculation, average value calculation, output signal hold, automatic display off, etc
Communication features	RS-232C (Modbus protocol)
Environmental conditions	-5~+40°C, no more than 90%RH
Supply voltage	AC100~115V or AC200~240V 50/60Hz
power consumption	Sample the part	Approx. 150VA
	Sample the part	Approx. 250VA
Dimensions, weight	Analyze the part	365 (W)× 211 (H)× 514 (D) mm about 12kg
	Pre-treatment parts	365 (W)× 377 (H)× 514 (D) mm about 18kg
Standard measurement of gas conditions	temperature	The inlet part is 0~50°C
	flow rate	Each optical system: 0.5L/min±0.2L/min
	dust	Not more than 50mg/Nm3
	pressure	Not more than 3kPa (the gas outlet side should be atmospheric pressure)
	Aerosol	not
	Corrosive components	HCL: no more than 10ppm

Create quality with quality! Win-win future with integrity! Impress people with professionalism! Impress customers with service!

In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

FujiElectric ZSVF compact gas analyzer

Sections viewed

Contact

working hours