FujiElectric PHN Paperless Recorder

Introduction: FujiElectric PHN Paperless Recorder for fast display of past dataStandard equipped with computer support software communication function screen saver Compact specifications 3 points, 6 points, 9 points of recording and up to 12 points of recording

Product Picture Show:

Specifications:

General specifications	Installation method:	Panel recessed or portable
	Material	Molded resins (housings, display frames)
	Dimensions, weight	〈Panel Mounting〉160×144×185mm, Approx. 1.5kg (9-point input)
	Supply voltage	AC100V～AC240V 50/60Hz
	power consumption	Approx. 42VA (at AC240V)
	External terminal section	M3 screw terminals
	Operating ambient temperature	0~50°C (Model 12th = Y or R) 0~40°C (Model No. 12 = E or W)
Input part	Enter the number of points	3, 6, 9 or 12
	Measurement cycle	100ms/3 points, 6 points, 9 points, 12 points
	Record the period	1 second ~ 12 hours
	Write cycle	1 minute ~ 12 hours
	Enter the signal	12 thermocouples (B, R, S, K, E, J, T, N, W, L, U, pN) 2 types of temperature resistors (pt100, JPT100) DC voltage〔50mV、500mV、5V (0~5V, 1~5V)〕 DC current (connect a separately sold shunt resistor to the input terminal)
	Switch the type of input	Switching via front button operation (set to the same type every 2 channels)
	Over-range function	It is equipped with thermocouple and temperature measuring resistor input as standard
	Computing functions	First-order delay filtering, scaling, difference between channels, F-value operation, accumulation operation, open-squared operation
Display Department	display	5.7 inch STN color LCD (320×240 dots) (Please note that there may be some pixels that are always bright or not always bright in the liquid crystal display, and due to the characteristics of the liquid crystal, there may be uneven brightness and when the ambient temperature exceeds 30°C, the overall whiteness may occur, which is not a fault.) )
	Backlight life	50,000 hours
	Display content	Trend chart display (up and down or left and right) Refresh cycle 1 second ~ 12 hours optional, scale display/no display optional; Bar graph or analogue meter display (refresh cycle of 1 second); digital display (refresh cycle is 1 second); Event summary display (alarm and information summary display); Historical trend display (readable log file); Cumulative data display; Group settings (up to 4 groups);
Recording function	External recording media	Micro memory card (for reading and writing on the recorder, please format it via FAT16 or FAT)
	Record capacity	Up to 512MB
	Recording method	Set the REC key on the front to ON and record the new file name at the start of each write and the start of the record at a fixed period
	Data retention period	This parameter is linked to the refresh cycle displayed in the trend chart
	data format	ASCII. code (directly readable by Excel, etc.) Approx. 166 bytes per sample on average (max/min recorded with 9-channel input) Binary number (not directly readable in Excel, etc.): about 40 bytes per sample on average (maximum/minimum value recorded for 9-channel input)
	Trend data	Select one of the minimum and maximum values, instantaneous values, and average values from the data sampled during the measurement period and save them
	Event data	Save alarm data as well as information data
	Cumulative value data	Saves the cumulative value data for the specified time
	Save the capacity	When the display refresh cycle is 30 seconds, about 1.5 years (ASCII.), about 6 years (binary number) (9 channels recorded, minimum and maximum values recorded, when using a 256MB micro memory card)
	Memory usage display	On the display screen, a bar graph shows that if the memory usage exceeds the capacity, the recording is stopped
Alarm function	Set the number of points	Up to 4 points can be set for each channel
	The type of alarm	Upper and lower limits
	display	When an alarm occurs, the digital display displays the status of the alarm The history is displayed in the alarm summary Battery Alarm: Displayed when the battery is depleted Memory Full Alarm: Displayed when the memory is full
	Relay output (optional)	Relay 10 points or open collector 18 points or relay 10 points + open collector 18 points
Standard performance	Indicates accuracy	± of input range (0.15% + 1digit) But the next range is ± (0.3%+1digit) B thermocouple is 400~600°C, R and S thermocouple is 0~300°C K, E, J, T, L, U thermocouples are -200~-100°C
	Indicates the resolution	0.1℃
	Standard contact compensation error	± 0.5°C (when measuring above 0°C.) However, the R, S, B, W thermocouples are ±1.0°C)
	Input resistance	Approx. 1 MΩ (Approx. 100 KΩ when power supply is off)
other	clock	With Gregorian calendar function
other	Storage backups	The set parameters are stored in the internal non-volatile memory The clock has a built-in lithium battery Trend data is not backed up and is stored on a micro flash memory card
Optional features	(1) Alarm output/DI (18-channel type not available)	Additional 10-point relay output and 5-point DI input Alarm output: 1A contact Alarm setting method: It can be set to output each channel separately or together DI Input: No voltage contact input Recording start/stop and information setting, F-number arithmetic reset, cumulative arithmetic start/stop, cumulative value reset, and LCD lighting are possible
Optional features	(2) Alarm output/DI/communication	Additional 18-point open collector output + 5-point DI input + RS485 communication Alarm output: open collector output 18-point alarm setting method: can be set to each channel for separate or common output DI Input: No Voltage Contact Input (5 points) Recording start/stop and information setting, F-number operation reset, accumulation operation start/stop can be performed, The cumulative value is reset and the LCD is lit Communication specifications: Signal transmission of measured values (instantaneous values) and signal reception of parameters are possible Communication protocol: MODBUS (RTU) Communication mode: semi-duplex serial Synchronization mode: start and end synchronization Symbol Format: Binary Data length: 8 bits Parity: even, odd, none Stop bit: 1 bit Communication speed: 9600bps, 19200bps Number of connections: up to 31 Communication distance: up to 500m in total length Note: When connecting via RS-232C, an RS-232Có RS-485 converter is required. Recommended product model: K3SC-10/omron
Computer support software (attached to CD-ROM standard)	O/S	Windows2000/Xp
	Required memory capacity	64MB or more
	content	The following two types are standard accessories (1) Data browsing software This is a software that can transfer past trend records from the data of a micro memory card to a computer for display, and has the function of displaying historical trends and event summaries. (2) Parameter loading software This is software that sets and changes various parameters of the main body on a computer.

The above is the product FujiElectric / Fuji Electric PHN type paperless recorder, mainly to understand the characteristics and product specifications of the product, we always uphold the integrity of life, sincere service attitude. If you are interested in our products, please contact our sales staff, we look forward to your call, hope our technology and service to bring you a good experience.

Our aim: to survive by quality, to develop by reputation, to serve eternity, to give us a chance, but also to give you a surprise.

FujiElectric PHN Paperless Recorder

Sections viewed

Contact

working hours