Ultrasonic sensors In order to ensure the best material flow, the in-plant logistics system often uses conveying equipment, and if you want to run the conveying equipment at high speed, it is necessary to obtain the location information of the container. Turck's RU50 ultrasonic sensor is the ideal solution for inspecting containers in intralogistics systems.

1) There is a difference between the two-wire system and the three-wire system of the proximity switch, and the three-wire system proximity switch is divided into NPN type and PNP type, and their wiring is different 2) The wiring of the two-wire proximity switch is relatively simple, and the proximity switch can be connected to the power supply after being connected to the load in series. 3) Three-wire proximity switch ...

Generally, when encountering the situation that the pressure transmitter has no output in the field, people always subconsciously think that there is something wrong with the pressure transmitter, but this damage only accounts for a small amount in practice. In many applications, pressure transmitters may be used separately and in combination with other equipment or systems.

TURCK analog inductive sensors Turck's analogue inductive sensors enable simple monitoring and control tasks. The sensor is capable of supplying three analog output signals: voltage, current, and frequency. These signals are proportional to the displacement of the object being detected. Lose...

The selection of displacement sensors should meet the requirements of the following objectives: 1. Technical objectives in terms of sensitivity For an instrument, the higher the sensitivity, the better, because the more sensitive, the simpler the change in the acceleration generated by the surrounding environment will be, and the acceleration ...

First of all, when using load cells, it is necessary to adjust the orientation of the sensors. Think of the sensor as a fragile product, cut the oscillation of the sensor, and try to handle it gently, because many sensors have elastomeric devices planned internally, and these elastomeric devices are critical to the stability of the sensor, ...

(1) The shape of the elastomer element should be as regular as possible, generally rectangular and circular. During the measurement process, conventional elastomers can be identified by sensors more easily and accurately. (2) The surface process should be precise and the density should be very uniform. Elastomers as part of the main force ...

The photoelectric effect can be divided into two categories: the external photoelectric effect and the internal photoelectric effect, and the internal photoelectric effect can be divided into the photoconductive effect and the photogenerated volt effect. It refers to the phenomenon that electrons in an object escape from the surface of the object under the illumination of light, resulting in photoelectron emission. Equipment made according to the external photoelectric effect ...

A pressure transmitter is a device that measures the pressure of a fluid or gas in a process and converts it into an electrical signal that can be used for monitoring or control purposes. Pressure transmitters have a few different operating principles to accomplish this: Piezoresistive pressure transmitters The first ...

Turck pressure sensor debugging method example: the 0.08-2MPa planning controller is selected, the pressure is requested to drop to 0.8MPa (down switching value) to announce the contact signal, the operation process is as follows: screw the product into the threaded mouth of the hydraulic pressure calibration table, and ...

1. For different viewing bodies and different viewing distances of different raw materials, different types of Turck proximity switches should be selected to make them have a high performance-to-price ratio in the system, for which the following criteria should be followed in the selection: ...

In addition to this new sensor series, Turck's safety technology portfolio also includes safety I/O modules. Thanks to the inclusion of an OSSD output, this safety inductive sensor series provides wear-free detection, safe orientation and range monitoring without the need for a separate device ...

1. Mechanical damage The most common problem in servo response encoder is a variety of mechanical damage, including hardware damage to the internal component structure of the encoder (code disc, shaft and bearing, etc.) due to mechanical oscillation, collision, impact, wear and tear. 1) Oscillation Pass...

Turck's inclination sensors, which combine MEMS and gyroscope signals for mobile applications, are now also available with switching outputs. Turck's QR20 inclinometer generates signals through a combination of two measuring principles: gyroscope signals and MEMS accelerometers (MEMS). Pass...

High measurement accuracy, compact structure, small size, light weight, good sealing performance, good durability and good long-term stability. The structure of the elastomer is simple, and the output symmetry is good. The natural frequency is high and the dynamic response is good, which is conducive to dynamic measurement. Insensitive to oscillations ...

Turck's BCT series sensors feature teachable pushbuttons and LEDs at the rear of the body for maximum user convenience. Turck is presenting a new generation of capacitive sensors from the BCT series, which are primarily used for level detection. Use...

Turck has expanded its connector portfolio with the new TXL and TEL series now available in straight or elbow M8 and M12 connectors. In order to meet the different needs of users, we can supply three-pin, four-pin, five-pin straight or elbow plugging ...