Turck's turck pressure sensor debugging method is an example: the controller with a 0.08-2MPa plan is selected, and the contact signal is announced when the pressure drops to 0.8MPa (the lower switching value), and the operation process is as follows: the product is screwed into the threaded mouth of the hydraulic pressure calibration table, and the pressure is applied to the product for 2 minutes according to the practical working pressure before it can be set.
1. Connect the multimeter to the output wire;
2. Twist the screws on the controller;
3. Increase the pressure to 0.8MPa, this value can be read from the standard pressure gauge;
4. Loosen the set screw;
5. Use a slotted wrench to rotate the set value clockwise to dispatch the hexagonal groove in the screw, so that the set value becomes small and large, until the switch contact is switched at O.6MPa;
6. The pressure of the dispatching and calibration table is changed back and forth on O.8MPa, and check whether the pressure is 0.6Mpa when the pressure drops, and this value is the downward switching value to be set. The corresponding up-switching value is between 0.82-0.84MPa;
7. Screw the set screw and complete the debugging.
Turck's TURCK pressure sensors are characterized by good stability, high precision, easy adjustment and high corrosion resistance. Mainly used in metallurgy, chemical industry, petroleum, steel, machinery, refrigeration equipment, refrigeration equipment, pump pressure control, low water level protection pressure control, power plants, cement, food, ships and other work of gas, steam, water, oil and other liquid pressure equipment and other industrial equipment in the actuator supporting pressure monitoring, alarm, interlock protection, to achieve two-position automatic control.
|
More on that
|
Sensor technology boosts the development of the robotics industry – Turck
Since the beginning of the 60s, China has made great progress in the research and development, design, production, and reliability improvement of sensors after the national research and development from the "Sixth Five-Year Plan" to the "Ninth Five-Year Plan", and has initially formed a system of sensor research, development, production and use.
|
|
In terms of industrial sensor selection – Turck
1. According to the measurement target and measurement environment
In order to carry out a detailed measurement work, it is necessary to first consider the principle of the sensor to choose, which needs to be analyzed and many elements can be confirmed. Because, even if the same physical quantity is measured, there are sensors with multiple principles to choose from.
|
|
Turck Proximity Switch Instruction Manual and Advantages
1) There is a difference between the two-wire system and the three-wire system of the proximity switch, and the three-wire system is divided into NPN type and PNP type, and their wiring is different
2) The wiring of the two-wire proximity switch is relatively simple, and the proximity switch can be connected to the power supply after being connected to the load in series.
3) Three-wire proximity switch ...
|
|
Three-wire connection for proximity switches – Turck
There is a difference between the two-wire system and the three-wire system of the proximity switch, and the three-wire system proximity switch is divided into NPN type and PNP type, and their wiring is different.
The wiring of the two-wire proximity switch is relatively simple, and the proximity switch is connected in series with the load.
|
|
Turck's safety inductive sensors
In addition to this new sensor series, Turck's safety technology portfolio also includes safety I/O modules. Thanks to the inclusion of an OSSD output, this safety inductive sensor series provides wear-free detection, safe orientation and range monitoring without the need for a separate device ...
|
|
Turck's RFID module now features FLC
Turck's TBEN-S-RFID block I/O modules are now available as a field logic controller
Ahead of SPS IPC Drives 2017 (Industrial Automation in Nuremberg, Germany), Turck has expanded its TBEN-S-RFID ...
|
|
Turck sensor classification
Sensors refer to equipment or devices that can sense the prescribed physical quantities and convert useful signals that can be used by the Great Wall according to certain laws. It generally consists of a sensitive element and a conversion element.
There are many ways to classify sensors, ...
|
|
Turck Ethernet IP67 fail-safe I/O modules
Turck's TBPN and TBIP complete fail-safe modules are field-based and function as safety logic controllers, thus helping customers in the modular planning and manufacturing of their machines.
Offline quiz security features to reduce ...
|
|
The structure of the proximity sensor switch
1. Durability
The reason why the switch has such a long life is that the switch acts as elastic in the straight direction from the elastic membrane. Despite the millions of activities after the elastic membrane, due to the small creep rate, only 0.1 - 0.3m ...
|
|
Vibration sensor testing method – Turck
In this era of rapid development of testing skills, if you want to mention the front-end testing system, it is the sensor, which is the soul of the entire testing system. In recent years, the rapid development of information skills has provided a good environment for the development of sensors, making them gradually become digital, multi-functional and intelligent.
|
|
Classification of electrical strain gauges – Turck
Resistance strain gauge is a kind of element used to measure strain, which is made of 0.02-0.05mm diameter constantan wire or nickel-chromium wire wound into a grid (or corroded into a grid with a very thin metal foil) in two layers of insulating sheet (substrate), and is connected with tinned copper wire and strain gauge wire as a strain.
|
|
Common troubleshooting for proximity sensors – Turck
(1) Stable power supply to the proximity sensor separately;
(2) the response frequency is in the extra range;
(3) There is jitter in the process of object detection, resulting in exceeding the detection area;
(4) Multiple probes are tightly connected to each other;
...
|
|
Introduction to the types of flow sensors – Turck
Flow is an important parameter in industrial production, in the process of industrial production, many raw materials, semi-finished products, and finished products are presented in a fluid state. The flow rate of the fluid has become the key to determining the composition and quality of the product, and it is also an important basis for production cost accounting and rational use of energy. Thus...
|
|
Symptoms of torque sensor damage and how to deal with it – Turck
The application of hysteresis dynamometer in the field of dynamometer application (HD series) is suitable for the testing of low to medium power (up to 14kW intermittent mode) motors. The hysteresis dynamometer does not need to rely on the speed to generate torque, but uses the hysteresis braking system, which can carry out the whole process experiment from no-load to lock-up. Lag...
|
|
Comparison of old and new Turck modules
Old model New model
BL67-16DO-0.1A-P MC 0116 0101
BL 67-1RS232 MC 2501 0000
BL 67-1RS485/422 ...
|
|
Turck's digital tour in Chongqing
As a super city in western China, Chongqing is not only a charming "Internet celebrity city", but also the "largest" industrial city with 45 industrial zones. In order to further promote the digitalization of manufacturing enterprises in the western region and focus on local vertical industries, the digital upgrade of factories across the country has solved the problem of ...
|
|
Precautions for sensor use – Turck sensors
Precautions 1, in the use of the sensor to prevent contact with some corrosive or overheated media, this point is very important, if we do not pay attention to this point when using the sensor, it will affect the relevant use of the sensor.
Note 2: In ...
|
|
Calibration steps for pressure transmitters – Turck
When calibrating the pressure, we need to zero the current of the transmitter, and then carry out the positive and negative relocation of the zero point according to the requirements, if the pressure transmitter is calibrated for the first time, then we also need to add the measured physical quantity calibration, and the subsequent calibration can be calibrated by manual operation.
...
|
|
How to use angle sensors to measure torque – Turck
It is difficult to measure torque on a continuously rolling axis, and there are several ways to do it. The most common method is to derive the torque from the energy required by the rolling shaft. In general, this means measuring the current of the motor that drives the rolling shaft. Although this is simple but inaccurate, it is caused by ...
|
|
Prone to malfunctions of pressure sensors – Turck
The first is pressure, and the transmitter can't afford to lose it. In this case, look at the pressure connector to see if it is leaking or clogged, if you admit that it is not, look at the wiring and see if the power supply is normal, simple pressure to determine if the output has changed, or if there is an output at the zero point of the sensor ...
|
|
Contact
working hours
