What is the difference between Config King and Kunlun Tongstate?

1. The optical performance is the best. The clarity and light transmittance are the highest, the reflection is the least, and there is no color distortion, this is because the sound wave screen body is pure glass, unlike the resistive screen with multiple layers of composite film; The capacitive screen is coated with a layer of film on the surface, and the light transmittance is worse. 2. Anti-scratch and anti-barbaric use ...

1. TPC1262HI common fault phenomenon of Kunlun Tongtai touch screen (1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) LCD screen display vertical bar, display horizontal bar ...

61. 200PLC: What is the reason for the communication status jump (1) Whether the communication delay setting is too short, and set the appropriate delay time; (2) Whether there is interference on site, shielded wire and grounding can be used; (3) Refer to PLC "SMW22", see PLC running program ...

(1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) The LCD screen displays vertical bars and horizontal bars (5) Communication connection failure (6) Start the boot half without moving ...

Four-wire touch screen The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...

The operating environment of Kunlun Tongtai TPC project was actively restarted If the CPU usage reaches 99% during project operation, the operating environment will be automatically exited and then started from the beginning. The reasons for high CPU usage may be: too many bitmaps, loops, etc.

In order to improve the anti-interference ability of the PLC system, we should start from the design. In the anti-interference design of specific projects, products with strong anti-interference ability can be selected to improve the anti-interference of equipment and systems by suppressing interference sources, cutting off or attenuating the transmission path of electromagnetic interference, and using software means.

On May 20, 2015, the "Kunlun Tongtai 2015 Seminar" entered the Ningbo Marriott Hotel. The Kunlun Tongtai Seminar departed from Hangzhou Station and once again stood in East China. By 2015, Kunlun will further expand to the East China market, and Ningbo is naturally one of the key development cities. ...

1. Check whether the power supply of the host is working normally. First, check whether the host system is powered by checking whether the power indicator on the host chassis panel is on and whether the power supply fan is rotating. Secondly, use a multimeter to check whether the external voltage meets the requirements, the voltage is too high or too ...

The most far-reaching technological change in touchscreen performance is the shift from resistive to capacitive touchscreen technology. According to iSuppli, a market research agency, nearly 25% of touchscreen mobile phones will be transferred from resistive to capacitive touchscreens by 2011. Capacitive touch screen technology brings ...

First of all, on the back of the Kunlun Tongtai touch screen, determine the specific model of the Kunlun Tongtai touch screen. Open the Kunlun Tongtai touch screen programming software, click [File] in the menu bar and open it. In the File drop-down menu, select Project Settings In the pop-up Modify Project ...

First of all, there is touch technology, which is very important. At present, there are three commonly used types of touch technology for touch screens, which are resistive touch screens, capacitive touch screens, and infrared touch screens. Capacitance and resistance can not be made of large size, infrared touch screen can be made of small size, can also be made of large ...

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

56. Does TPC support OPC communication? No, the network version supports OPC communication. 57. 200PLCLC communication wiring with TPC7062K (1) The 7 positive and 8 negative of the TPC RS485 interface is connected with the positive and 8 negative of the PLC serial port 3, and the wiring diagram is as follows: TPC PLC 58. 200 ...

Step 1. Backup program: First of all, you need to back up the touch screen program that has broken the original display control. Program files can be copied to a USB or SD card. Step 2. Install a new display touchscreen: Install the new display touchscreen to your computer, then connect the power and data cables. ...

81. What are the main characteristics of 128M TPC? (1) CE platform upgrade Using WINCE 5.0 operating system, user operation methods and habits are the same as those of the previous CE 4.2 system; (2) Hardware storage device upgrade The total storage data capacity of the product has increased from the existing 6 ...

1. If you are using a capacitive touch screen, then it is recommended that you first install the driver required for the capacitive touch screen correctly according to the requirements of the manual when you use it for the first time, and then click "Start"/"Program"/"Microtouch Touc" on the screen with your fingers.

1. Wipe the phone screen with a dry cloth before turning it on every day. 2. Drinks or water droplets falling on the screen will cause the software to stop reacting. This is due to the fact that water droplets and fingers have similar properties, and it is necessary to wipe them. 3. Kunlun Tongtai MCGS screen program can be automatically ...

Since infrared touch technology is the trend of contacting products in the future, when will infrared technology become mainstream? At present, the touch screen technology widely used in the market is mainly resistive technology touch screen, capacitive technology touch screen, and infrared technology touch screen. If the use of resistors becomes longer, it will ...

1) Check whether the connection of the touch screen is right, and whether one of the wires connected to the keyboard port of the host (take the working voltage of 5 volts touch screen from the keyboard port) is connected, please check the connection. 2) Observe the situation of the touch screen control box light, if it is not lit or the red light is on, it means that the control box is broken, please change it.