How to modify the IP address of the touch screen?

1.1 How to delete the job button on the taskbar of the touch screen? Set "Modify/Set System Parameters/General/Job Buttons/Features" to "Closed". 1.2 What does RS485 Default/RS485 2W/RS485 4W Separation mean in the communication port type? r ...

Transparent properties Transparency, which directly affects the visual effect of the touch screen. Transparency has the problem of transparency, infrared technology touch screen and surface acoustic wave touch screen are only separated by a layer of pure glass, transparent can be regarded as a leader, other touch screens should be carefully scrutinized, "transparent", ...

1. The step to troubleshoot your touchscreen system is to determine if the problem is related to the display, software, or hardware: 2. Don't confuse display issues with touchscreen issues, the two are unrelated. 3. Software issues are identified by basic hardware functional testing. If the hardware is ...

1) Check if the hard drive is turned off in the "Display Energy Saving Settings" of Wlndows 9x. The way to do this is to right-click on the desktop, select the "Properties" command, then select the "Screen Saver" tab from the dialog box, click the "Settings" button, and set the parameter to "...

1.3D Object Exhibition (dynamic display of 3D models of objects) [1] 2. Banks and other financial institutions (business inquiries and service promotion at business locations) 3. Telecommunications (business inquiry in the business hall, business promotion in the experience hall) 4. Government agencies (public information issuance)

1. Set through the system parameter settings: menu bar [Common] - [System Parameters] - [General Attributes] - [Screen Saver Settings] If the screen saver time is set to 25 minutes (equal to 25 written in LW9081), the screensaver window is 80, from the time the program is downloaded to the HMI is turned on, 25 ...

1. SPI interface Serial Peripheral Interface (SPI): Serial peripheral interface. It was first defined by Motorola on its MC68HCXX series of processors. It enables the MCU to communicate serially with various peripherals to exchange information. The SPI has three registers ...

1. Consider the size, how big the screen is, 7 inches or 10 inches, etc 2. Whether there is an Ethernet communication interface or a USB interface 3. Consider the type of interface supported by the touch screen, RS232/RS485 interface 4. Whether there is a general agreement, so that it can cooperate with different brands...

Why can't the infrared touch all-in-one machine be calibrated? 1. It is possible that the touch screen control card receives the operation signal before the host starts to load the touch screen driver, please power off and restart the computer and recalibrate. 2. It is possible that the sound wave screen is used for a period of time, ...

Precautions when using Verun Tong inverter 　　When shipping and storage During the storage period, it is necessary to ensure that the inverter is not subjected to physical shocks and oscillations. It is also necessary to ensure that they are not exposed to rain and are not placed in places where the ambient temperature is too high. When transferring, hold the bottom of the body ...

Question 1, How to solve the problem of double click is not sensitive? Open the infrared touch screen to adjust the sensitivity of the program and reduce the sensitivity. Question 2, Is there any drift phenomenon in the infrared screen? The structure of the infrared touch screen is generated by infrared rays, so usually the sleeves and so on touch the infrared screen ...

1. The screen is powered off, and the first DIP switch behind is dialed to the ON position; 2. Power on again, a white cross cursor will appear on the screen, click the middle of the cross cursor vertically, after the point (the time can not be too short), the cross cursor will automatically jump to the next position, the cross light ...

1. DIP switch mode touch calibration and system initialization. For the full eMT series, MT8000i series, TK series, WT series and other HMIs, there is a set of reset buttons and DIP switches, which can trigger the corresponding functions when switching between different modes. If the HMI touches ...

30. Button control indicator (same address) Set the multi-state transfer switch element/bit state transfer switch element and the multi-state indicator element/bit status indicator element to the same address, click the multi-state transfer switch element/bit state transfer switch element, and the corresponding indicator ...

1. Copy the required OS to a USB flash drive (FAT32 format is only supported); For example, in the next test, place the OS file in the firmware folder at the root of the USB flash drive. 2. Plug the USB flash drive into the USB host port of the HMI to be updated; 3. Click the arrow in the bottom right corner of the screen ...

18. Macro calculation: The values to be calculated are read, and then the data is calculated and written to LW0. 19. According to the different selections of the project menu, two different direct windows will pop up with one button: Macro commands are triggered by a button to read the ...

Advantages of infrared touch screen: 1. High stability, will not drift due to changes in time and environment 2. Highly adaptable, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no ...

1. The inverter burns out 2. The fuse will be burned when the power is on, and the motherboard will fail; 3. The liquid crystal is faulty, and the motherboard is also burned; 4. The power supply of the motherboard is partially damaged; 5. The motherboard is faulty, and there is a large current burnout; 6. The backlight does not light up, and the motherboard inverter is faulty; 7. Reverse ...

The types of capacitive touch screens are divided into two types: surface capacitive touch screens and projected capacitive touch screens. Surface capacitive touch screen Commonly used is the surface capacitive touch screen, which has a simple working principle, low price, and simple circuit design, but it is difficult to achieve multi-touch. ...

1. Open the Weilun software; 2. Click "Edit" - system parameters; 3. Enter "Mitsubishi model" in the pop-up dialog box name; 4. Check the "PLC" below to select the PLC type; 5. Communication can be realized by connecting the machine with a communication line. ...