Features:
It has the function of automatic adaptation of motor parameters, which can automatically generate optimal control parameters for different motors and maximize the performance of the motor;
It has a phase memory function;
It has automatic half-flow function, DIP switch selection;
It has the function of trial operation, DIP switch selection;
It has over-voltage, over-current and other protection functions
With micro-step filtering function, the input pulse can be dynamically smoothed, reducing the motor motion transients, and making the motor run more smoothly;
Optocoupler isolation ERR fault signal output function, large throughput current up to 100mA;
THE OPTO-DECOUPLING ISOLATION SIGNAL INPUT IS 5-24V, AND THE PULSE RESPONSE FREQUENCY CAN REACH UP TO 400KHZ.
DIP switch selection, 15 subdivisions, 8 currents
The DIP switch selects the way the pulse signal is inputted: pulse/direction or double pulse;
Product parameters
Input voltage: 24~70VDC
Overvoltage protection voltage: greater than 85VDC
Under-voltage protection voltage: less than 15VDC
Overheat protection temperature: more than 85 degrees (thermistor temperature) and
Phase current (peak): 1.8/2.4/3/3.6/4.2/4.8/5.4/6, a total of 8 settings (unit: A)
Subdivision range: 200 - 25600 Pulse/rev, a total of 15 steps
Applicable motor: 57 two-phase hybrid stepper motor
Input Signal:
PLS (CW), DIR (CCW), FREE signals↓
Input voltage: 5-24VDC↓
Input current: 8mA@5VDC, 12mA@24VDC
Signal input mode: pulse + direction (PLS+DIR), double pulse (CW/CCW)
Output signal: ERR, open collector output, maximum flow current of 100mAP
Work indicator: two LEDs such as operation and error are combined to indicate the status
Protection circuit type: over-voltage alarm, under-voltage alarm, over-current protection, over-temperature protection
Cooling method: natural air cooling
Use environment
Occasions of use: Avoid metal dust, oil dew or corrosive gases
Ambient humidity: <85%, H (no condensation and water droplets)
Ambient temperature: 0°Cw+40°C
Storage temperature: -20°Cw+70°C
Weight (net): 0.25KG
Dimensions: 118x75.5x25.4mm (toothless)
Degree of protection: IP20
If you are interested in our kinco Buke driver 2CM860 input voltage: 24~70VDC, please call our staff, looking forward to your call~
|
More on that
|
Kinco SMH series servo motor power range: 200W-7.5kW
Introduction: Kinco SMH series servo motor power range: 200W-7.5kW, DC voltage UDC: 300/560, can be installed incremental encoder, absolute value encoder, resolver encoder, energy efficiency level 2.
peculiarity
European design, strong performance, low cogging ...
|
|
The F104E-CAN HMI has up to 512M 10.4TFT memory
Product introduction: FUTURE series HMI human-machine interface focuses on human-computer interaction experience, with higher processing performance and better display effect; High-brightness and high-resolution display, 4:3 industrial size; A new generation of Kinco Dtools configuration software, powerful, simple and easy to use; Cortex-A9 ...
|
|
Kinco KS series PLC 4-channel high-speed pulse output
Product Introduction
Significant installation space savings:
The compact design of the thin sheet, with a thickness of less than 25mm, can be installed in very small electrical cabinets
Higher Computing Speed:
Using the new MCU platform, the scanning cycle of 1000 bit instructions is 0.25ms, which can reach the same kind of small PLC...
|
|
Kinco HP series touch screen PLC all-in-one machine Power supply voltage DC 24V
Introduction: Kinco HP series integrates HMI and PLC, which is an economical hybrid product launched by Buke company. Under the premise of ensuring rich functions, high performance and high reliability, the all-in-one machine optimizes the hardware design and has good integration, eliminating the connection between PLC and HMI, and also eliminating the direct connection between the two.
|
|
AK800M motion controller with 24 digital inputs
Introduction: 4M program storage space, 8M data storage space, the controller body integrates 24 digital inputs and 24 digital outputs, 2 CAN bus masters, and built-in termination resistors.
Key features:
Cortex A9 800MHZ 32-bit RISC CPU；
4M ...
|
|
Kinco iWMC Integrated Servo Wheel Protection Grade: IP54
Introduction: Kinco iWMC integrated servo wheel Protection level: IP54, atmospheric pressure: 86kpa-106kpa, energy consumption braking: external braking resistor is required (according to the operating situation, mainly used in the occasion of rapid start and stop).
peculiarity
Highly integrated: ...
|
|
Kinco/Buke HMI GT070HE-4G ARM RISC 32Bit 800MHz
Product introduction: GREEN series HMI GT IoT 7" 7" 1024*600 high resolution, wide and comfortable picture, clear and pleasing display; Support Ethernet, built-in 4G function; Powerful scripting function to support edge computing; Built-in IoT function to support remote service.
...
|
|
Kinco FV20 series inverter Single-phase 220v/three-phase 380v, 50/60Hz
Introduction:Kinco FV20 series inverter Single-phase 220v/three-phase 380v, 50/60Hz, low speed and large torque, small torque ripple, optimized structure design, high power density.
peculiarity
Built-in EMC filter optimizes the electrical environment of EMC field devices
Low speed and high torque, ...
|
|
Buke low-voltage servo drive FD114S/124S/134S/144S/FD164S
Features:
Support single-axis, two-in-one;
Support pulse;
Support Modbus\Canopen\EtherCAT communication control;
Low-voltage DC power supply to meet the power and power supply needs of mobile trolleys;
New miniaturized terminal design for more compact size, ...
|
|
Kinco OD1X4S series low-voltage servo driver 50W-750W
Product Introduction
Low-voltage servo specification models
OD124S/134S
Low voltage servo power range
50W-750W
Low voltage servo supply voltage
DC24V——70V
OD1X4S series low-voltage servo drive Main features:
• Compared to the city ...
|
|
Kinco F7 HMI Withstand voltage: 500V AC for 1 minute
Introduction:Kinco F7 HMI Withstand voltage: 500V AC for 1 minute, insulation resistance: more than 50MΩ@500V DC, high-definition display, resolution up to 1280×800 pixels, simple and easy to use, U disk update project.
peculiarity
The whole machine is IP65, shockproof and waterproof
...
|
|
Kinco Buke Servo Motor SMC40S-0005-30M□K-5DSU Voltage: 48V
Features:
New electromagnetic design
The cogging torque is small, the torque ripple is low, and the vibration during the operation of the motor makes the torque output more stable
Short fuselage design
The fuselage structure has been redesigned to shorten the length of the fuselage, save more installation space, and reduce the size of the equipment ...
|
|
Kinco OD1X4S series low-voltage servo drive power range: 50W-750W
Introduction: Kinco OD1X4S series low-voltage servo drive power range: 50W-750W, power supply voltage: DC24V-70V, support CANopen, Modbus, EtherCAT bus communication; Easy to embed into customer dashboards.
Key features:
• Compared to the market ...
|
|
Kinco GL070 154.02(W)×85.92(H) 7 inch
Product Introduction: The Kinco HMI GREEN series is the preferred model for general applications; The non-hollow mask is more effective in oily environments; Beautiful appearance, ultra-thin body; Cost-effective.
Basic specifications
Display size 10.1" TFT
...
|
|
Kinco/Buke HMI GH043U2 Kinco DTools V3.3
Product introduction: Kinco HMI GREEN series subway, high-speed rail and other rail transit preferred models, motherboard rugged treatment to effectively cope with complex use environment, built-in isolated power supply to enhance reliability, dual USB Host design, can be connected to USB interface devices or U disk before and after.
...
|
|
Kinco HMI GT150E2 Power consumption: 16W
Introduction: Kinco Human-machine interface GT150E2 Power consumption: 16W, display color: 16.77M true color, built-in isolated power supply, prevent external interference, enhance product reliability, motherboard three-proof spraying, strong corrosion resistance in harsh environments.
peculiarity
Standard dual network ports; Three...
|
|
Kinco/Buke Motion Control Servo Drive CD412S-AA-000 AC220V
Product introduction: CD2S series supports pulse and analog control, FD2S series supports MODBUS, CANopen, EtherCAT communication control, and supports EASY TUNE gain automatic adjustment function, which can meet most application requirements by simply setting the system rigidity.
...
|
|
Buke low-voltage servo motor MD60/80 power supply voltage: DC24V-60V
Product Introduction
Wide power supply range: support 24-60VDC wide voltage;
Multiple power options: 200-750W multiple power options;
Small size: the drive and motor are integrated and integrated, and the structure space is more compact;
Strong overload capacity: 3 times the overload energy ...
|
|
Kinco CD2S & FD2S Series Servo Driver Power supply: 24VDC
Introduction: Kinco/Buke CD2S & FD2S series servo drive power supply: 24VDC. Supply voltage: single-phase/three-phase 220VAC, three-phase 380VAC, support EASY TUNE gain automatic adjustment function, just simple to set the system rigidity, can meet most application needs.
Host...
|
|
Kinco GT070E-WiFi GT IoT Engineering Plastics
Product introduction: GREEN series human-machine interface GT IoT type 7" high-definition display, 16.77 million true color; Support Ethernet, built-in Wi-Fi function; Powerful scripting function to support edge computing; Built-in IoT function to support remote service.
Basic Specifications ...
|
|
Contact
working hours
