Introduction: Kinco HP series integrates HMI and PLC, which is an economical hybrid product launched by Buke company. Under the premise of ensuring rich functions, high performance and high reliability, the all-in-one machine optimizes the hardware design, has good integration, eliminates the connection between PLC and HMI, and also eliminates the process of direct communication connection between the two, effectively reduces the cost of users, and is an integrated product with high cost performance
peculiarity
• Integrated PLC and HMI, with multi-channel IO and analog, small space installation and excellent cost performance;
• USB programming port;
• High-speed pulse counter;
• High-speed pulse output;
• Serial communication port;
• Powerful touchable display terminals.
Key features:
PLC and HMI are integrated, with multi-channel IO and analog, with small space installation and excellent cost performance
• 4.3-inch touchscreen display terminal, with 9*DI/DO 9*transistor and 2*AI switch, 132*102*40.1mm.
• 7-inch touchscreen display terminal, with 16*DI/DO 14*transistor switch, 2*AI, 1*AO, and 204*150*38.55mm.
USB programming port
• The programming port adopts Micro USB interface and supports USB2.0.
High-speed pulse counter
• The HP043 provides 4 high-speed pulse counters and the HP070 provides 2 high-speed pulse counters. Each high-speed counter allows for a maximum of 32 PV values and supports 32 segments of "CV=PV" interrupts. The high-speed counter supports a variety of modes, and can count single-phase, double-phase (Up/Down), AB phase (1 octave and 4 octave), etc. The maximum counting frequency of HSC0 and HSC1 is 50KHz for single phase and 50KHz for double phase. The HSC2 and HSC3 have a maximum count frequency of 20 KHz for single phase and 10 KHz for double phase, which can be intuitively configured by the user using the [HSC Configuration Wizard] in the programming software.
High-speed pulse output
• The HP043 provides 3 high-speed pulse outputs, and the HP070 provides 2 high-speed pulse outputs. The channels are Q0.0, Q0.1 and Q0.4, respectively, and all support PTO (Pulse Burst) and PWM (Pulse Width Modulation) outputs. Among them, the maximum output frequency of Q0.0 and Q0.1 channels can reach 50KHz (the load resistance is not more than 3KΩ), and the maximum output frequency of Q0.4 channel is 10KHz.
Serial communication port
•HP043-20DT 1 RS485 interface, PORT1, communication rate up to 115.2kbps, HP043-20DTC&HP070-33DT 2 RS485 interfaces, PORT1, PORT2, communication rate up to 115.2kbps, PORT1 supports programming protocol, Modbus RTU master and slave, free communication, PORT2 supports Modbus RTU master and slave, free communication.
The touchable display terminal is powerful
• 65536 colors of high-definition color display, with USB main port, support for large-capacity data storage, using Kinco HMI conventional products powerful programming software, rich functions.
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
This article introduces the Kinco HP series touch screen PLC all-in-one machine power supply voltage DC 24V products, if you are interested in Kinco touch screen, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kinco Step Driver FM560-EA-000 Voltage: 24-50VDC
Product Introduction
Product name: Kinco Buke
Product type: FM series bus stepper driver
Specifications: FM560/860/880
Power supply voltage: DC24V-70V
2&3 phase subdivision type
Features:
Support Modbus/Canop...
|
|
Kinco F080E SD Card Extended Storage Frequency 1GHz
Product introduction: FUTURE series HMI human-machine interface focuses on human-computer interaction experience, with higher processing performance and better display effect; High-brightness and high-resolution display, 4:3 industrial size; A new generation of Kinco Dtools configuration software, powerful, simple and easy to use; Cortex-A9 ...
|
|
Kinco HMI GL104E ARM RISC 32Bit 800MHz
Product introduction: Kinco HMI GREEN series 15-inch large screen preferred model; The industrial size is 4:3 for great visual coordination; The structure is sturdy and atmospheric. Built-in isolated power supply enhances reliability, high-brightness LCD better display effect, supports CAN bus, and three serial ports meet diverse needs.
...
|
|
Kinco HMI GT100E2 Power consumption: 5W@ DC24V
Introduction:Kinco Human-machine interface GT100E2 Power consumption: 5W@ DC24V, withstand voltage performance: 500VAC for 1 minute, motherboard three-proof spraying, strong corrosion resistance in harsh environments; Built-in isolated power supply prevents external interference and enhances reliability.
peculiarity
10.1" HD display, 1677...
|
|
Kinco OD1X4S series low-voltage servo drive power range: 50W-750W
Introduction: Kinco OD1X4S series low-voltage servo drive power range: 50W-750W, power supply voltage: DC24V-70V, support CANopen, Modbus, EtherCAT bus communication; Easy to embed into customer dashboards.
Key features:
• Compared to the market ...
|
|
Kinco K5 series PLC supports PTO, PWM function
Product Introduction
K5 series PLC is an upgraded product of our company's K3 series, which is close to market demand, provides richer functions and higher performance, and is a cost-effective all-in-one small programmable controller. The K5 can provide high-speed pulse input, high-speed pulse output, CANO...
|
|
Kinco FM Series Bus Stepper Driver Power supply voltage: DC24V—70V
Product Introduction
Specifications and models
FM560/860/880
Power supply voltage: DC24V-70V
2&3 phase subdivision type
Key features:
• Support Modbus/Canopen/EtherCAT bus control protocol;
• Support RS232 serial communication, ...
|
|
Kinco touch screen GT150E2 resolution: 1024*768 pixels
peculiarity
Standard dual network ports; Three-serial port design, and COM0/COM1 supports RS485 at the same time;
LARGER STORAGE SPACE: 256MB FLASH + 256MB DDR3 RAM;
Built-in isolated power supply to prevent external interference and enhance product reliability;
Motherboard three anti-spray ...
|
|
Kinco AK800M-48DT Motion Controller 4M program storage space
Introduction:Kinco AK800M-48DT motion controller 4M program storage space, 24 transistor digital output, 1 EtherCAT master, support synchronous positioning, electronic cam, interpolation function.
peculiarity
4M program storage and 8M data storage
...
|
|
Kinco SZ7GS HMI Handheld Terminal Cable length: 5 meters
Introduction: Kinco SZ7GS HMI Handheld Terminal Cable length: 5 meters, insulation resistance: more than 50MΩ@500V DC, simple installation: support VESA standard (75×75mm hole spacing) bracket and hanger mounting.
peculiarity
Basic Specs: 7" TFT, 800×480 pixels
|
|
Kinco HMI G070HE HMI 7-inch display GT IoT type
Product introduction: GREEN series human-machine interface GT IoT type 7" 1024*600 high resolution, wide and comfortable picture, clear and pleasing display; Support Ethernet, built-in Wi-Fi function; Powerful scripting function to support edge computing; Built-in IoT function to support remote service.
...
|
|
Kinco/Buke KW series PLC LoRa communication
Introduction: Under the premise of continuing the K series with rich functions, high performance and high reliability, KW series PLC adopts a CPU with higher performance, and provides its own wireless network interface, MicroUSB programming, high-speed input/output with higher performance, compact installation, etc.
|
|
AK800M motion controller with 24 digital inputs
Introduction: 4M program storage space, 8M data storage space, the controller body integrates 24 digital inputs and 24 digital outputs, 2 CAN bus masters, and built-in termination resistors.
Key features:
Cortex A9 800MHZ 32-bit RISC CPU；
4M ...
|
|
Kinco/Buke HMI dedicated handheld terminal RT070 power: 8W
Introduction: Kinco/Buke HMI dedicated handheld terminal RT070 Power: 8W, input range: DC16V-DC32V, built-in isolated power supply, mobile operation handheld terminal, standard 5 meters cable (10, 15 meters optional).
peculiarity
Basic Specs: 7" TFT, 800×480 pixels
|
|
Kinco MT4523TE Human-machine interface Allowable power loss: <5ms
Introduction:Kinco/Buke MT4523TE human-machine interface allows power loss:
|
|
Buke touch screen F2156E2-PX memory: 8GB storage + 1GB memory
peculiarity
15.6" capacitive screen, 2K display, 16 million true color;
Dual network port + double serial port design, worry-free communication;
Quad-core CPU + 1GB memory + 8GB flash memory, ultimate performance;
Metal shell + three-proof spraying + power isolation, safe and reliable;
Matching the latest ...
|
|
Kinco KW series PLC uses a higher performance CPU
Product Introduction
The K series continues to be rich in functions, high performance, and high reliability
Adopt a higher performance CPU
The body comes with a wireless network interface and Micro USB programming
Mini form factor, metal housing
Kinco-KW series PLC belongs to the small all-in-one PLC ...
|
|
Kinco HMI G121E 4-wire precision resistor network 12.1 inch
Product introduction: Kinco HMI GREEN series NXP industrial-grade CPU, more than 10 years of ultra-long supply; 12.1", 4:3 ratio provides a larger display area, and the highlight is clearer; Support external SD CARD, U disk, up to 256GB expansion; Built-in serial port isolation, isolated power supply to enhance reliability ...
|
|
Kinco low-voltage servo driver FD123/133 16-bit I/O interface
Product Introduction
Low-voltage servo specification models
FD123/133
Low voltage servo power range
200W/400W/750W
Low voltage servo supply voltage
DC24V——70V
FD1X3 series low-voltage servo drive Main features:
201910081 ...
|
|
Kinco/Buke HMI GR100E MicroUSB interface metal DC28V
Product introduction: GR series contains 3 models: GR043, GR070E, GR100E, GR series USB slave port adopts MicroUSB interface, E means product with Ethernet port, GR series adopts rear installation and fixing method, which can perfectly fit the surface of the equipment and integrate with the equipment.
|
|
Contact
working hours
