Product Introduction
Significant installation space savings:
The compact design of the thin sheet, with a thickness of less than 25mm, can be installed in very small electrical cabinets
Higher Computing Speed:
Using the new MCU platform, the scanning cycle of 1000 bits instruction is 0.25ms, which can reach the same level of small PLC
The ontology provides a CANopen interface:
The KS105C1 and KS105C2 ontology comes with a CAN interface, supports CANopen master, slave and CAN free protocols, and works with a convenient motion control command library to provide a more cost-effective option for multi-axis applications
4 high-speed pulse counters:
Four high-speed pulse counters are available. High counting frequency 200K; Each high-speed counter allows for the configuration of 32 PV values and supports 32 segments of "CV=PV" interrupts; The high-speed counter supports a variety of modes, and can count single-phase, double-phase (Up/Down), AB phase (1 doubling frequency and 4 frequency octave) and so on; Users can use the [HSC Configuration Wizard] in the programming software to configure it intuitively
4 high-speed pulse outputs:
Provide 4 high-speed pulse outputs, all of which support PTO (pulse burst) and PWM (pulse width modulation) output; Among them, the output frequency of 3 channels can reach 200KHz (the load resistance is not more than 1.5KΩ), and the output frequency of the other channel is 10KHz PFLO_F
Serial communication port:
One RS232 and one RS485 serial communication ports are provided, named PORT0 and PORT1 respectively, with a baud rate of 115.2Kbps. The PORT1 port can be used as a programming port and also supports Modbus RTU master, slave protocol and free communication
The extension module can be used as a Modbus slave:
The RS485 interface of the expansion module can be used as a Modbus slave, providing a more cost-effective solution for more applications
|
More on that
|
Kinco MT100 HMI Power consumption: 7W@ DC24V
Introduction:Kinco MT100 HMI Power consumption: 7W@ DC24V, input range: DC10.8V-DC28V, withstand voltage performance: 500VAC for 1 minute, main frequency 792MHz, memory 64MB; A new generation of Kinco DTools configuration software, powerful, easy to use.
...
|
|
Kinco M2070HE Human-machine interface Brightness: 450cd/m²
Introduction:Kinco/Buke M2070HE Human-machine interface Brightness: 450cd/m², memory: 256MB NAND flash memory + 128MB DDR3 memory, a new generation of Kinco DTools configuration software, powerful, simple and easy to use.
peculiarity
7", HD display, 16.77 million true ...
|
|
Kinco GL070 154.02(W)×85.92(H) 7 inch
Product Introduction: The Kinco HMI GREEN series is the preferred model for general applications; The non-hollow mask is more effective in oily environments; Beautiful appearance, ultra-thin body; Cost-effective.
Basic specifications
Display size 10.1" TFT
...
|
|
Kinco FM series bus stepper driver power supply voltage: DC24V-70V
Introduction: Kinco FM series bus stepper driver power supply voltage: DC24V-70V, support RS232 serial port communication, with rich IO function settings, support origin, multi-section speed, multi-stage position and other control modes.
Key features:
• Support Modbus/Canopen/E...
|
|
Kinco Walker HMI F2156E2 2K display, 16 million true colors
Features:
15.6", 2K display, 16 million true colors;
Dual network port + double serial port design, worry-free communication;
Quad-core CPU + 1GB memory + 8GB flash memory, ultimate performance;
Metal shell + three-proof spraying + power isolation, safe and reliable;
Matching the latest K ...
|
|
Kinco HMI GH043 Display size 4.3" TFT LED
Product introduction: Kinco HMI GREEN series subway, high-speed rail and other rail transit preferred models, motherboard three-proof treatment to effectively cope with complex use environment, built-in isolated power supply to enhance reliability, classic shape, hidden serial port outlet.
Basic specifications
...
|
|
Buke MK series Internet of Things all-in-one machine MK070E-33DT DC 24V
Product Introduction
Kinco MK series combines the advantages of Buke HMI+PLC+Internet of Things, and is an economical all-in-one product launched by Buke company that supports the function of the Internet of Things. The MK series all-in-one PCs are designed to be high...
|
|
Kinco FD1X3 Series Low Voltage Servo Driver 24V Logic Power Supply
Introduction: FD, OD, MD series low-voltage servo drive is a new generation of small size, good performance and high stability products developed by Buke Electric after years of market research and according to the characteristics of the logistics automation industry. Buke low-voltage servo system working voltage DC-V, support CAN, Mo ...
|
|
Kinco MT4523TE Human-machine interface Allowable power loss: <5ms
Introduction:Kinco/Buke MT4523TE human-machine interface allows power loss:
|
|
Kinco MK series Internet of Things all-in-one machine rated power 10W
Introduction: Kinco MK series combines the advantages of BYKE HMI+PLC+Internet of Things, and is an economical all-in-one product launched by KINCO to support the function of the Internet of Things. The MK series all-in-one PCs are designed to use high-performance CPUs while retaining the high cost performance of the HP series all-in-one PCs.
|
|
Kinco Buke HMI F2070E2 7" display, 16.77 million true colors
Product Introduction
7" display, 16.77 million true colors
Quad-core CPU, 1G memory + 8G flash memory
Three-proof spraying, PCB moisture-proof, mildew-proof, anti-corrosion
Power isolation, strong anti-interference ability, safe and reliable
Dual network port + triple serial port design, support dual RS485 applications
...
|
|
Kinco F7 HMI Withstand voltage: 500V AC for 1 minute
Introduction:Kinco F7 HMI Withstand voltage: 500V AC for 1 minute, insulation resistance: more than 50MΩ@500V DC, high-definition display, resolution up to 1280×800 pixels, simple and easy to use, U disk update project.
peculiarity
The whole machine is IP65, shockproof and waterproof
...
|
|
Kinco iWMC Integrated Servo Wheel Protection Grade: IP54
Introduction: Kinco iWMC integrated servo wheel Protection level: IP54, atmospheric pressure: 86kpa-106kpa, energy consumption braking: external braking resistor is required (according to the operating situation, mainly used in the occasion of rapid start and stop).
peculiarity
Highly integrated: ...
|
|
Kinco F104E Kinco Dtools Configuration Software Reliability
Product introduction: FUTURE series HMI human-machine interface focuses on human-computer interaction experience, with higher processing performance and better display effect; High-brightness and high-resolution display, 4:3 industrial size; A new generation of Kinco Dtools configuration software, powerful, simple and easy to use; Cortex-A9 ...
|
|
Kinco FD1X4S series low-voltage servo drive supports pulse
Introduction: FD, OD, MD series low-voltage servo drive is a new generation of small size, good performance and high stability products developed by Buke Electric after years of market research and according to the characteristics of the logistics automation industry. Buke low-voltage servo system working voltage DC-V, support CAN, Mo ...
|
|
Kinco/Buke HMI F150E displays 16.7M colors
Introduction: Kinco/Buke HMI F150E Display color 16.7M, display size: 15" TFT, resolution: 1024×768 pixels, built-in ferroelectric memory, support unlimited erase of recipe data.
peculiarity
FUTURE series HMI human-machine interface focuses on human-computer interaction experience ...
|
|
Kinco HMI GL043 USB Slave 450cd/m² 4.3" TFT
Product introduction: Kinco HMI GREEN series is suitable for small space occasions; Beautiful appearance, ultra-thin body; Cost-effective. Models for general applications; Beautiful appearance, ultra-thin body; Cost-effective.
Basic specifications
Display size 10.1" T ...
|
|
Buke FMC frameless torque motor FMC057 rated torque 0.32Nm-0.64Nm
Product Introduction
Frameless torque motor is different from the traditional servo motor, there is no casing, only stator and rotor 2 parts, compared with framed motor, frameless motor configuration is flexible, easy to install, focusing on the current drive system high integration trend, it can be said that frameless motor is more ...
|
|
Kinco HMI GH104E 10.4" TFT 4-Wire Precision Resistor Network
Product introduction: GR series contains 3 models: GR043, GR070E, GR100E, GR series USB slave port adopts MicroUSB interface, E means product with Ethernet port, GR series adopts post-installation and fixing mode, which can perfectly fit the surface of the equipment and integrate with the equipment.
|
|
Kinco FV20 series inverter Single-phase 220v/three-phase 380v, 50/60Hz
Introduction:Kinco FV20 series inverter Single-phase 220v/three-phase 380v, 50/60Hz, low speed and large torque, small torque ripple, optimized structure design, high power density.
peculiarity
Built-in EMC filter optimizes the electrical environment of EMC field devices
Low speed and high torque, ...
|
|
Contact
working hours
