How to set the IP address of the touch screen

The new cMT-iV6 is a touchscreen with a built-in cMT Viewer that can be connected and monitored to multiple cMT-SVRs or cMT series machines at the same time. The cMT-iV6 is equipped with a 9.7-inch screen with a resolution of 1024×768, a built-in speaker and a high-performance 1GHz processor.

If we look at the sample manual, we will find that the I/O interface of the Weiluntong touch screen also includes several types, such as USB port, Ethernet port, serial interface, which we see a lot, as well as SD card slot, WIFI, CANBUS, sound output, image input, etc. Like USB ...

Four-wire: Because of factors such as cost and mature technical level, four-wire touch screen is almost the most basic production specification for touch screen practitioners. First of all, in terms of resistive touch screen technology, four-wire touch screen accounts for more than 50% of the market. It is composed mainly ...

The industrial touch screen is a resistive screen, which is better than the capacitive screen anti-interference, but generally if there is no response, most of the touch glass on the outside (generally called the touch board) is broken, and it is good to replace it directly, of course, the following problems are not excluded: 1. The touch screen and PLC are generally used together, and the ...

1. Consider the size, how big the screen is, 7 inches or 10 inches, etc 2. Whether there is an Ethernet communication interface or a USB interface 3. Consider the type of interface supported by the touch screen, RS232/RS485 interface 4. Whether there is a general agreement, so that it can cooperate with different brands...

An overview of the principles To complete multi-touch on the capacitive screen, it relies on adding electrodes of mutual capacitance, in short, the screen is divided into blocks, and a group of mutual capacitance modules are set up in each area to work independently, so the capacitive screen can independently detect the touch status of each area.

Due to the environmental adaptability of Weilun touch screen, especially the surface sound wave screen, the screen will affect the normal use due to water droplets, dust and other pollution, so the touch screen also needs regular maintenance like ordinary machines. 1. Wipe the screen with a dry cloth every day before turning it on.

EasyBuilder Pro is a very easy to use and powerful Veruntong touch screen programming software, the software provides a humanized human-computer interaction interface, which can meet the needs of different programmers, suitable for Veruntong eMT, cMT, iE, MT (iP) and TK (iP) models, the software provides ...

1. First of all, open the created Weilun touch screen project, select Common in the menu bar and click Open. 2. Secondly, select the system parameter icon in the common drop-down menu and click to open. 3. Finally, click Change. ...

(1) The surface acoustic touch screen is a high-durability structure, which is scratch-resistant and anti-violence. Because the working surface of the surface acoustic touch screen is a layer of invisible and indestructible acoustic energy, the base glass of the touch screen does not have any interlayer and structural stress (the surface acoustic wave touch screen can be developed to a straight ...

1. Check the hardware connections: Make sure the touchscreen is properly connected to the device and that all cables and connectors are in working order. Check if the connector is loose or damaged, and if so, reconnect or replace the connector. 2. Check the drivers: Make sure the device is properly installed.

1.1 How to delete the job button on the taskbar of the touch screen? Set "Modify/Set System Parameters/General/Job Buttons/Features" to "Closed". 1.2 What does RS485 Default/RS485 2W/RS485 4W Separation mean in the communication port type? r ...

Right-double-click the parameter settings button. Specific steps: 1. Create a new screen, and then make a keyboard, and the OK button is [Screen Jump Control] 2. Double-click the [Parameter Setting] button and select [Properties]. 3. Click [Security], and then ...

With the sudden changes in the market environment, the digital transformation of enterprises is imminent. In the process of digital transformation, cloud service integration is an important part. However, the high-level technical threshold and huge construction costs often discourage enterprises. 　　Therefore, Weiluntong Technology ...

1. Can the human-machine interface be connected to the PLC? That's not true. Human-computer interface products are produced to solve the human-computer interaction problem of PLC, but with the development of computer technology and digital circuit technology, many industrial control equipment have serial communication capabilities, so as long as there is ...

1. SPI interface Serial Peripheral Interface (SPI): Serial peripheral interface. It was first defined by Motorola on its MC68HCXX series of processors. It enables the MCU to communicate serially with various peripherals to exchange information. The SPI has three registers ...

The five-wire resistive touch screen and the four-wire resistive touch screen both adopt the principle of analog resistance, and their conventional fault characteristics are exactly the same as those of the four-wire resistor. If you are using a five-wire resistive touch screen, when there is an installation and maintenance problem, please determine and solve the problem in the following order. ...

1. The touch screen controls the inverter through PLC 1. At present, the general control inverter needs to use PLC to communicate with the inverter, read the information of the inverter, and then the touch screen communicates with the PLC to complete the control of the inverter to start and stop, and monitor the operation of the inverter.

1. Dispose of dirt and grease on the touch screen The accuracy of the screen is a characteristic of grease build-up on the surface, which can make it cumbersome to type the correct commands. In addition, due to the accumulation of dust caused by overheating, the internal components of industrial computers may not work properly. The use of microfiber ...

The parameters of the touch screen to characterize the characteristics of the capacitor include the loss factor D value, the figure of merit Q, the series equivalent resistance ESR, etc., the essence is the same, take a parameter to know the quality of the capacitor, but take the loss factor D value reference meaning. These parameters are usually not possible with a digital bridge.