How to detect Kunlun Tongtai touch screen and 200smart communication

1. Check the wiring port: first check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the touch screen ...

1. The capacitive touch screen only needs to touch, and no pressure is needed to generate a signal. 2. Capacitive touch screen only needs to be corrected once or not at all after production, while resistive technology requires conventional correction. 3. The life of the capacitive solution will be longer, because the part in the capacitive touch screen ...

Open Kunlun Tongtai touch screen software, create a new [Window 0], and click to open. Find the Bitmap icon in the toolbox and click to open it. After creating a bitmap in Window 0, right-click and select Load Bitmap. Open the text where the image is saved ...

31. Historical alarms are not displayed (1) "Automatically save the generated alarm information" is not selected in the attribute setting of the alarm data object; (2) The alarm data does not reach the upper/lower limit of the alarm value; (3) "MCGS_ALARM" is not selected for the group object. 32. ...

1) Check whether the connection of the touch screen is right, and whether one of the wires connected to the keyboard port of the host (take the working voltage of 5 volts touch screen from the keyboard port) is connected, please check the connection. 2) Observe the situation of the touch screen control box light, if it is not lit or the red light is on, it means that the control box is broken, please change it.

After receiving the touch signal, the capacitive touch screen converts the touch data into electrical pulses and transmits it to the touch screen control IC for processing. The signal is amplified by a low-noise amplifier (LNA), then converted and demodulated by analog-to-digital ratio, and finally sent to a DSP for data processing. Electricity...

1. Install the MCGS configuration software on the computer first, then find the power supply to supply power to the touch screen, connect the screen with the computer with the communication cable, and upload it in the software. 2. After we install the software, first go to open the software, and then in the drop-down option of the file menu, select ...

The main features of the MCGS embedded configuration software 1. Simple and flexible visual operation interface: using full Chinese and visual development interface, in line with the usage habits and requirements of Chinese. 2. Strong real-time performance and good parallel processing performance: it is a real 32-bit system...

1. Click the "Settings" button on the MCGS interface to enter the settings interface. 2. Click on the "Alarm Answer" tab. 3. In the Alarm Response tab, check the Enable Alarm Response box, and set the Answer Time, Trigger Alarm Time Range, Response Time, Response Time, Alarm Response, Alarm Response, Alarm Response, Alarm Response, Alarm Response, Alarm Response,

1. After the MCGS screen is connected to the computer (USB connection, network cable connection is acceptable), in the download configuration window, click on the advanced operation, and there is a running environment upgrade button inside, click it, and wait for the upgrade to be completed. 2. In the download configuration window, click to make a U disk comprehensive function treasure, and then ...

1. There is no response to touch after using it for a period of time The touch screen will not respond after a period of normal use after being turned on. Touch screen fault analysis and processing are divided into the following three situations: 1) In some applications, due to poor grounding performance, the control box shell will be covered with a large number of ...

41. How to implement pop-up sub-windows This is achieved using the OpenSubWnd() function, which is described in the MCGS help document. 42. After power failure, save it as the initial value of the next boot Use it in the script of the exit strategy! SaveSingleDataInit() and ! FlushDat ...

How to choose the touch screen model in the Kunlun Tongtai software, this is selected according to the model of the touch screen. Before you can choose a model, you need to determine what type of touchscreen you use on your device. Different models of touch screens, some with high configuration, some with low configuration, but the configuration is ...

1. Every day before turning on the device, scrub the screen with a dry cloth. 2. If a drop of water or a drink falls on the screen, the software will stop the response, which is due to the fact that the water droplets and fingers have similar properties, and the water droplets need to be wiped off. 3. The touch screen controller can automatically judge the dust, but the dust is too ...

One. The touch screen is not allowed Fault phenomenon: A surface acoustic wave touch screen, touching the part of the monitor screen with your finger can not complete the corresponding operation normally. Fault analysis and processing This phenomenon may be the reflection of the sound wave touch screen around the screen after a period of use.

Accuracy: Accuracy can be defined as the maximum positioning error in a predefined touchscreen area, measured in the straight-line distance between the actual position of the finger and the measured position. When measuring accuracy, a simulated or mechanical finger is used. Fingers placed on the panel with a ...

1. Check the terminal port First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the contact ...

Kunlun touch screen is a positioning device, the user can directly enter coordinate information by pointing to the computer, just like a mouse and keyboard, it is also an input device. Kunlun touch screen has many advantages such as durability, fast response, space saving, and convenient communication. With this technique, ...

1. Processor: Intel Celeron J1900 quad-core processor, frequency 2.0GHz, stable and reliable performance. 2. Operating system: Support Windows, Linux and other operating systems, and provide pre-installed software (such as remote monitoring software). 3. Display: 7 inch T...

The difference between capacitive screen and resistive screen is different in its working principle, touch technology, use environment, cost and life, and then I will explain it to you in detail: How it works Capacitive touch: works by using the body's current induction. When the finger touches on the metal layer ...