CHINT/CHINT NXC Series AC Contactor NXC-06M

NB1-63DC DC circuit breaker is used for DC rated voltage to 1000V, rated current to 63A line, for overload and short circuit protection, can also be used as infrequent operation conversion of the line. The circuit breaker is suitable for DC system applications such as communication and photovoltaic systems. Compliant with standards ...

NCH8G series household AC contactors (hereinafter referred to as contactors) are mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance loads; It can also be used to control the home ...

NBH8LE-40 □ residual current action circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated voltage 230V, rated current to 40A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the circuit breaker can quickly cut off the fault power supply in a very short time, ...

CHINT Xinrui NHM5 series disconnector is suitable for AC 50/60Hz, rated voltage AC690V and below, rated current to 1000A circuit, the product can be operated with load, widely used as an isolation between the load and the power supply, in order to ensure the safety of personnel during equipment maintenance. The product ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NU6-II. series surge protector is suitable for AC 50Hz, rated voltage of single-phase 230V/three-phase 400V power distribution and control system, to meet the SPDII. level test, used to suppress the transient overvoltage below the equipment withstand impulse overvoltage, discharge surge energy, so as to protect the system circuit and equipment. Suitable...

OUVT-X1H over-voltage and under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-63, NBH-40 series circuit breaker matching, when the terminal voltage of the tripper is reduced to the undervoltage protection range or increased to the overvoltage protection range, the tripper acts and drives the circuit breaker to automatically ...

HY23 series instead of HZ3 series combination switch is suitable for AC 50Hz or 60Hz, voltage 380V circuit, as a power supply introduction switch, or as a three-phase squirrel cage induction motor with a control operation frequency of no more than 300 times per hour. Rated voltage: 380 Rated current: 30 Control Electricity ...

ND16 series signal light is suitable for indication signals, warning signals, accident signals and other indication signals in telecommunications, electrical and other lines with an AC 50Hz (or 60Hz), rated voltage of 400V and below or DC working voltage of 400V and below. Conform to the standard: GB/T 14048.5. Root...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NB7LE series residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 63A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be ...

Introduction: NVF2G series inverter is a high-performance open-loop vector inverter independently developed by our company. It has the characteristics of large starting torque (0.5Hz, 1.5 times rated torque), strong overload capacity, flexible and convenient operation, forward and reverse PID, etc. This series of inverters is divided into mini, general purpose (heavy duty) and ...

NBH-100NGV and NBH-100HGV miniature circuit breakers are suitable for AC 50Hz, rated voltage to 230V or 400V, rated current to 100A, and play the role of overload and short circuit protection. At the same time, as a special supporting circuit breaker for photovoltaics, it can realize automatic opening of undervoltage and protect the line.

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

SHT-X1H shunt trip is suitable for AC rated voltage to 400V or DC rated voltage 48V in the line, and NBH-63, NBH-40 series circuit breaker matching, when the tripper terminal is connected to the rated control voltage, the tripper action and drive the circuit breaker to automatically break, so as to achieve long-distance ...

The main function of OUVT-X3 over-under-voltage tripper: assembled with circuit breaker to achieve over-under-voltage protection Rated working voltage (Ue): AC 230V, 50Hz; Overvoltage action setting value (Uo): 280 (1+5%)V; Undervoltage action setting value: (35%-70%)Ue; Rated insulation ...