CHINT OUVT-X3H over/undervoltage tripper

YBLX-ME series travel switch is suitable for AC 50Hz or 60Hz, voltage 380V, DC voltage 220V control circuit, for the travel control of the moving mechanism, the change of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Symbol...

NX50 is a high-end distribution box newly developed by CHINT Research Institute, which is widely used in household indoor power distribution to ensure the safety of various indoor electrical facilities, including lighting, kitchen equipment, air conditioning and other equipment. It can also be used for office buildings, shopping mall decoration, etc. This article introduces CHINT/CHINT ...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in the circuit of AC 50Hz, rated working voltage to 1140V, rated working current to 630A, for long-distance connection and breaking circuits, and can be related to appropriate thermal overload relays or electronic protectors, etc.

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

NB1G-63 miniature circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage 230V, rated current to 63A in the line, the line plays the role of overload short circuit and overvoltage protection, can also be used as the line infrequent operation conversion. Standards: GB ...

The XF9 auxiliary contact is suitable for the line with the agreed heating current to 6A, the AC rated voltage to 415V or the DC rated voltage to 130V, and it is assembled with NB1 or NBH8 miniature circuit breaker for the signal indication of the long-distance circuit breaker. Standards: GB/T 14048.5, IEC 6094 ...

Based on the Linux system, the system is stable, efficient and reliable. Industrial-grade high-performance Cortex A8 processor with a clock speed of 600MHz. The COM port integrates RS232/422/485 communication mode. The product provides USB master station and USB slave port, USB slave download port supports 10M/s transmission speed, ...

HY23 series instead of HZ3 series combination switch is suitable for AC 50Hz or 60Hz, voltage 380V circuit, as a power supply introduction switch, or as a three-phase squirrel cage induction motor with a control operation frequency of no more than 300 times per hour. Rated voltage: 380 Rated current: 30 Control Electricity ...

Product Overview NA8 series universal circuit breaker rated working current from 200A to 7500A, rated limit short-circuit breaking capacity up to 150kA, rated working voltage up to AC1140V, ambient temperature of -45 °C-+70°C, NA8 series universal circuit breaker set height ...

The AL-X3H alarm contact conforms to GB/T 14048.5 standard. It is mainly used in lines with AC rated voltage to 415V or DC rated voltage to 130V, and assembled with NBH-125 series circuit breaker for signal indication of long-distance circuit breaker fault breaking. Alarm contact is an accessory product, assembled in ...

NXBFLE-32 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 32A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on and off under normal circumstances. The product conforms to IEC61009-1, GB/T...

NB8LE-63M residual current action circuit breaker is mainly suitable for AC 50Hz, rated voltage of 230V, rated current to 63A in commercial office buildings, residential and general industrial terminal distribution lines, to provide overload, short circuit protection and leakage protection for the line, but also under normal circumstances...

NS5 series motor starter is mainly used in AC 50Hz (or 60Hz), working voltage to 690V, working current to 32A circuit, as a three-phase squirrel cage asynchronous motor overload, phase failure, short circuit protection and infrequent starting control for use, can be used as distribution line protection...

Introduction: CHINT/CHINT miniature circuit breaker NXB-125G is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

NB7LE series residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 63A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be ...

ND9 signal light is suitable for AC 50Hz/60Hz, rated voltage up to 230V, DC voltage up to 230V circuit control system. It is used as an indication signal, preset signal, accident signal and other indication of telecommunications, electrical and other lines. Standards: GB/T 14048.5, IEC 60947-5-1 ...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...

The POWGRID-F series terminal box is suitable for circuits with AC 50Hz or 60Hz, rated voltage of 230V/400V AC, rated current/maximum continuous input current of no more than 125A, and the maximum power consumption capacity of the cabinet is 35W. It can be widely used in real estate - residential, commercial construction, hotels and public buildings. Technology...