The industrial computer has the characteristics of dustproof, moisture-proof, vibration-proof, high-temperature resistance, etc., and the following matters should be paid attention to when using it:
1. In the process of using the industrial computer, it is not possible to disassemble the industrial computer, and the common faults and troubleshooting methods of the industrial computer should be referred to when the fault is presented; Do not move the IPC to avoid damage to the hard disk due to vibration.
2. In order to ensure the heat dissipation effect of the industrial computer, regularly clean up the dustproof sponge of the industrial computer. In order to ensure the efficient operation of the industrial computer, the disk disk is cleaned up and the disk fragmentation is collected regularly. In order to prevent the loss of materials due to failures, the important data in the industrial computer is backed up regularly. In addition, if the IPC needs to be connected to the Internet or LAN, it is necessary to install anti-virus software and update it regularly.
3. Use genuine licensed operating systems and related application software. If other application software is required, admit whether the software is compatible with the operating system of the industrial computer, and admit whether the hardware configuration of the industrial computer is satisfactory to the requirements of the software for the industrial computer hardware.
4. In order to ensure the safe operation of the industrial computer, do not change the BIOS settings of the motherboard at will. Do not plug or remove the board with power to avoid electrostatic damage. When the industrial controller has a power outage due to non-human reasons, in order to ensure the normal and reliable operation of the industrial computer, the power supply of the industrial computer should be disconnected immediately, and the power supply should be turned on after acknowledging that the power grid is stable to ensure the stable operation of the industrial computer.
|
More on that
|
Industrial computer hard disk class failure - EVOC
1. The hard disk is very slow when it is running, and there will be crashes;
2. When the industrial computer is started, the screen prompts that the hard disk cannot be found;
3. There is a rattling sound on the hard disk, and the system cannot be started;
4. The circuit board of the hard disk is burned or smoked; ...
|
|
EVOC has advantages over ordinary computers
1. The industrial computer chassis is made of aluminum alloy structure, which has the characteristics of efficient dustproof, anti-magnetic and shock-proof compared to general computers;
2. The chassis is equipped with PCI and ISA slots.
3. Set up a targeted independent power supply in the chassis, ...
|
|
Fanless is structurally different from traditional industrial computers - EVOC
The traditional industrial computer uses a combination of 4U and other types of cold-rolled plate chassis + gold finger motherboard (full-length or half-length card) + base plate + high-power power supply.
There are a number of unstable elements to such a structure:
1. If the CPU card is inserted into the baseboard, there will be a bad touch phenomenon, such as vibration.
|
|
EVOC's new generation of special computers debuted
As one of the core equipment of intelligent manufacturing, special computers have seen some new upgrades and changes in product technology, services and industrial development, and their role and tasks in the intelligent era have become more and more important.
In the face of all kinds of new ...
|
|
Causes and solutions of the blue screen of industrial computer - EVOC
1、0x0000007E
There are many reasons for this, including hardware compatibility, faulty drivers or system services, or some software. Solution: Use the Event Viewer to get more information and discover the source of the fault.
...
|
|
Choose the machine vision IPC method - EVOC
Machine vision is a comprehensive skill, which is mainly composed of industrial cameras, light sources, industrial computers and corresponding picture analysis software systems. Machine vision is like a single-function industrial robot, such as using a camera to obtain a picture of the object to be detected, and the special light source makes the detection policy ...
|
|
The phenomenon that the industrial computer does not respond when it is turned on - EVOC
After the industrial computer is turned on, there is no repercussion, and the following methods can be used to distinguish the width and the key. After turning over the power switch of the IPC, check whether the indicator light on the panel of the IPC case is lit and whether you can hear the rolling sound of the fan in the case.
...
|
|
Types of embedded motherboards – EVOC
There are generally two types: embedded motherboards based on x86 ARM embedded motherboards based on RISC (Reduced Instruction Set Computers), also known as ARM embedded motherboards (licensed by ARM, each chip manufacturer has its own special functions).
...
|
|
The difference between industrial computer hard disk - EVOC
1. Hard disk speed
The speed of the hard disk is one of the important parameters to identify the level of the hard disk, and it is one of the key factors of the internal transfer rate of the hard disk, which directly affects the speed of the hard disk to a large extent. The speed of the hard disk refers to the rotation speed of the motor shaft in the hard disk, which is the speed of the hard disk in 60 seconds.
|
|
EVOC - classification of industrial computers
The main categories of industrial computers are: IPC (PC bus industrial computer), PLC (programmable control system), DCS (loose control system), FCS (field bus system) and CNC (numerical control system).
1、IPC
...
|
|
The difference between embedded industrial controller and embedded computer motherboard - EVOC
First of all, the biggest difference between industrial control motherboards and general PC boards is that there are more PCI slots on industrial motherboards, some of which are ISA slots. PC boards don't usually do this. Usually, industrial control motherboards do not have graphics cards. There is a PCI-E graphics slot on the computer motherboard. In addition to embedded ...
|
|
Industrial Tablet PC Cleaning Method - EVOC
1. First of all, prepare things: there are more things to prepare, such as detergent (bring your own sponge block), ear wash balls, hair dryers, oil brushes, soft rags, erasers, alcohol, cotton balls, etc., as well as Phillips screwdrivers and anti-static wrist straps.
...
|
|
What conditions should be met by the industrial computer in the future - EVOC
With the continuous development of industrial automation, industrial computers have adapted to market demand and have been in continuous advancement at many levels. In terms of skills, the advancement of computer skills, communication skills, microelectronics skills and control skills has created a good skill environment for the development of industrial computer careers.
|
|
EVOC has a full range of dedicated motherboards for network security
With the increasing use of the network, preventing hackers from intrusion and malicious damage by competitors has become a key issue in the use of network security.
|
|
EVOC products are used in the field of intelligent manufacturing
EVOC, as a leading provider of intelligent production and processing solutions in China, has played an important role in the completion of "China's Production 2025". EVOC focuses on intelligent production, and its IPC, MEC, PPC series products are widely used in various occupations of intelligent production, especially in 3C production.
|
|
Introduction to the main category of industrial computers, FCS - EVOC
PLC programmable logic manipulator: It is mainly composed of CPU module, input module, output module and programming equipment.
DCS distributed control system: It is mainly a multi-level computer system composed of process control level and process monitoring level with communication network as the link, which summarizes the computer ...
|
|
Attention should be paid to the problem when using the industrial computer - EVOC
1. The industrial computer should be placed in a stable place, and it is not easy to fall;
2. Prevent the industrial computer from being directly exposed to sunlight and other heat sources;
3. Do not step on the power cord and do not wrap the power cord together;
4. General industrial control electromechanical ...
|
|
The difference between the north and south bridges on the main board - EVOC
An important part of a motherboard can be said to be the chipset of the motherboard, the chipset of the motherboard is usually composed of a northbridge chip and a southbridge chip, and the two together form the chipset of the motherboard.
Northbridge Chip is primarily responsible for the completion of the work with the CP ...
|
|
The application of EVOC products in the Internet of Things
On March 19, 2021, the 2021 CAIMRS and Annual Selection and Awards Ceremony of China's Production Digital Service Summit hosted by Industrial Control Network was held in the form of real-time live broadcast in the cloud, and the results of the 19th Automation and Digitalization Annual Selection were released. Turck has once again been named one of the "Top 10 Companies of the Year".
|
|
Industrial computer keyboard and mouse failure treatment method - EVOC
The industrial computer, that is, the industrial computer, the primary structure and operating principle are the same as that of ordinary computers, the difference is that the industrial computer adopts a steel structure chassis, with fixed strips inside, and has a high anti-magnetic, dust-proof and anti-oscillation ability, which is suitable for complex industrial sites.
The IPC can be used for data receiving.
|
|
Contact
working hours
