Soft Touch/Rorobot Soft JawBMC-4BG64[P]/S Opening and closing frequency: 6 times/second

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Taiwan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Flexible claw BMC-4BG64[P]/S

Product Introduction
Rorobot BMC-4BG64[P]/S Fingertips open in positive pressure and clamped in negative pressure

quality assurance

Attentive service

Secure transactions

Product Description

Introduction:Rorobot Soft Gripper BMC-4BG64[P]/S, B-4BG64[P]/S is an external gripper type soft jaw, recommended to clamp the workpiece size (28-50) mm, opening and closing size in (50.4-80) mm, suitable for grabbing steamed cakes, steamed buns, siu mai and jujube cakes and other soft foods, B-4BG64[P]/S is a soft claw suitable for the food industry. Soft touch soft finger is made of pure soft material, no rigid bone, adjustable clamping force, to cope with fragile and fragile products, will not be pinched and clamped at the same time to avoid scratches on the surface, the product meets the United States FDA, EU 1935/2004/EC food grade testing standards, can be directly in contact with food, suitable for food, fresh industry

Soft Touch/Rorobot Soft JawBMC-4BG64[P]/S Opening and closing frequency: 6 times/second

Features:

The fingertips are open in the positive pressure state and clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G.

When the workpiece is light in weight, or very soft, and it is easy to stick and adsorb on the soft claw when blanking, the non-marking material [PAS] should be preferred.

Product parameters

Repeat positioning accuracy: 0.05mm

Recommended load: 1500g

Service life: 1,500,000 times

Safe working air pressure: 150kPa

Opening and closing frequency: 6 times/second

External gripping force: 0-15N

BMC module weight: 130g

BMC module weight: 141g

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the Rorobot soft claw BMC-4BG64[P]/S products, if you are interested in Rorobot soft claw, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	Rorobot B-3B18 weight 6.4g Introduction: Rorobot Soft Beak B-3B18 Features: Replaceable flexible chucks The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G It can be used as a clamp or external support Recommended for use with soft-touch actuators Product References ...
	The Rorobot Air Driver iPCU 2 is rated at 12W Introduction: Rorobot Air Driver iPCU 2, with two options: standard iPCU 2-SMN and high-speed iPCU 2-HMN, the high-speed type has a larger flow rate and faster response speed, and is suitable for high-speed handling conditions. Features: With 3 adjustable ...
	Soft Touch/Rorobot Finger Module FM-C8V2 Positive Pressure Stroke 42mm Introduction: Rorobot Finger Module FM-C8V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...
	Soft Touch/Rorobot Quick Change Module QCM-02 Introduction: SoftTouch/Rorobot Quick Change Module QCM-02, Quick Change Module [QCM] is used for automatic quick change of spare grippers. The quick-change module [QCM] is installed between the flange connection module [FCM] and the end of the robotic arm, and is divided into the robotic arm side (R-side, installed at the end of the robotic arm) and the gripper side (G-side, ...
	Soft Touch/Rorobot Finger Module C6V3 Module length 72mm Introduction: Rorobot Finger Module C6V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle ...
	Rorobot BML-2076D5[PAS]/S Introduction: Rorobot BML-2076D5/S Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G. The soft claw material is divided into conventional type and non-marking type, ...
	Soft Touch/Rorobot Soft Touch Module Slip Mounting Plate SMP-13 slot length 20mm Introduction: Soft-Touch/Rorobot Soft-Touch Module Slip Mounting Plate SMP-13 Features: According to the length of the slot, it is divided into SMP-13 / SMP-14 / SMP-15 / SMP-16 It can be used for the assembly between the soft beak module, the connection combination [CM] and the aluminum profile The installation angle of the soft beak module and the ...
	Soft Touch/Rorobot Finger Module B4V5 Module length 82mm Introduction: Rorobot Finger Module B4V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
	Rorobot B-3B14 weight 6.1g Introduction: Rorobot Soft Beak B-3B14 Features: Replaceable flexible chucks The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G It can be used as a clamp or external support Recommended for use with soft-touch actuators Product References ...
	Rorobot FM-C4V5/LS1[HAS] Introduction:Rorobot FM-C4V5/LS1[HAS] Product parameters Positive pressure stroke: 24.5mm Negative pressure stroke: 16mm Safe working air pressure: 300kPa Suggested load: 380g Tare weight: 90g Our customer-centric ...
	Soft Touch/Rorobot Soft Jaw BMC-3B24[H]/S Introduction: Rorobot Soft Jaw BMC-3B24[H]/S Features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D. Soft-touch material points ...
	Rorobot BMC-1G071010[LP]/S The recommended load is 12g Introduction: Rorobot Robot Soft Jaw BMC-1G071010[LP]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. The soft claw material is divided into ...
	Soft Touch/Rorobot Finger Module FM-A7V1 Finger length 97mm Introduction: Rorobot Finger Module FM-A7V1, Features and Applicable Scenarios: Combination of two-finger modules, compact structure, small footprint. The spacing and installation angle are not adjustable, suitable for clamping tiny, thin and light workpieces, and the fixing method: can be fixed from three directions. Features ...
	SoftTouch/Rorobot Passive Driver iPCU2 Introduction: FlexTouch/Rorobot Passive Driver iPCU2 FlexTouch/Rorobot Passive Driver iPCU2 Features: Compact soft-touch gripper-specific controller. Small size, light weight, easy installation. It has 3 adjustable output air pressure ranges, and fully supports the ...
	Soft Touch/Rorobot Finger Module FM-A8V1 Finger width 24mm Introduction: Rorobot Finger Module FM-A8V1, Features and Applicable Scenarios: Combination of Two-Finger Module, Compact Structure, Small Footprint. The spacing and installation angle are not adjustable, which is suitable for clamping tiny, thin and light workpieces. Features: Features and applicable scenarios: two-finger ...
	Soft Touch/Rorobot Finger F-B8 Negative Pressure Stroke 37mm Introduction: Soft Touch/Rorobot Finger F-B8 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...
	Soft Touch/Rorobot Finger Module C8V3 Finger height 14mm Introduction: Rorobot Finger Module C8V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle ...
	Soft Touch/Rorobot Finger Module B5V3 Finger width 18mm Introduction: Rorobot Finger Module B5V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted. Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
	Rorobot B-20606[P]/S The recommended load is 30g Introduction: Rorobot B-20606/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, and it is recommended to use it with a soft-touch air driver, and the fingertip distance G is supported to use the working air pressure adjustment. Soft-touch materials are divided into conventional type [H] and non-marking type, ...
	Rorobot BML-1G071010[PAS]/S The recommended load is 12g Introduction: Rorobot Soft Jaw BML-1G071010/S Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G. The soft claw material is divided into conventional type and non-marking type ...