1. Installation steps and methods of embedded industrial all-in-one machine
1. First put the fuselage of the industrial all-in-one machine flat in a stable place, and accurately embed the base into the fuselage.
2. Put on the screws, screw the screws into each eyelet, and confirm whether they are tightened.
3. Before cleaning the screen of the embedded industrial all-in-one machine, stop using the device and unplug the power plug to ensure that the device is in a power-off state, and do not use the spray directly on the screen.
4. The touch screen of the industrial all-in-one machine should be kept clean frequently, if there is dust Egypt dirt on the surface, it can be scrubbed with a towel or softer items, and it is recommended to use a non-corrosive cleaning of glass.
2. Precautions for the use of embedded industrial all-in-one machine
1. Because most of the embedded industrial all-in-one machines are used in public places, unstable voltage may cause equipment damage. It is recommended to use stable mains power, and do not share a power supply with high-power equipment such as elevators.
2. Place the embedded industrial all-in-one machine in a ventilated, dry, and non-strong direct light environment, and do not let the equipment suffer from rain and moisture; Leave more than 250px heat dissipation space around the device, and in order to ensure normal operation, the continuous switching time should not be less than 10 seconds. Please take extra care when using it in environments such as poolside, bathroom, kitchen, etc.
3. Do not place the embedded industrial all-in-one machine equipment in a sealed place, or cover the equipment, block the ventilation holes of the equipment, and prevent the temperature in the chassis from being damaged due to excessive temperature when the equipment is working.
4. Before the industrial all-in-one machine is connected to the power supply, be sure to check whether the host, display, and touch screen are connected, and turn on the power only after confirming that they are correct.
5. Please only use the mounting parts and accessories specified by the industrial all-in-one machine manufacturer. Avoid stepping on or pinching on the AC cord, plug, or power adapter.
6. Do not disassemble or repair the embedded industrial all-in-one machine by yourself, so as to avoid high-voltage electric shock or other dangers, and professional maintenance personnel should be asked to complete all the maintenance work.
7. During a thunderstorm or when not in use for a long time, unplug the power plug of the industrial all-in-one machine. During transportation and use, try not to touch the LCD screen, do not squeeze the screen, and do not let sharp objects or hard objects hurt the LCD screen to avoid damage to the LCD screen.
|
Contact
working hours
