Please confirm whether the AC power supply voltage is consistent with the rated voltage of the servo drive, otherwise there is a risk of injury, fire, or damage to the drive.
Do not connect the input power cord to the output terminal, otherwise the drive will be damaged.
It is not possible to directly test the insulation withstand voltage of the driver, and the control loop of the drive cannot be tested using a megohmmeter.
The drive must be connected to the motor in the correct phase sequence, otherwise it will cause the drive to fail or damage the drive.
Before the servo motor test run, in order to avoid accidents, please disconnect the motor load and run the motor separately.
Before the machine starts running, make sure that the power supply can be disconnected from the drive at any time by means of the emergency stop switch.
The corresponding parameters need to be set before operation, otherwise the drive may not operate properly or behave unexpectedly due to the load.
Ask an electrical engineer to carry out wiring work, otherwise there is a risk of electric shock or fire.
Do not touch the conductive parts directly; All external cables of the drive, especially those related to strong electricity, should never be connected to the housing or shorted to each other, otherwise there is a risk of electric shock or short circuit.
Disconnect the power supply and wait 15 minutes before rewiring the drive or risk electric shock.
The contact current can reach 0.5mA, and it is important to take reliable grounding measures, otherwise there is a risk of electric shock.
During operation, please do not touch the radiator or external braking resistor, otherwise burn accidents may occur due to high temperatures.
Be sure to install an overcurrent protector, leakage protector, and emergency stop device, and make sure that they are valid after wiring is completed, otherwise there may be a risk of electric shock, injury, or fire.
Leakage currents in the drive may exceed 3.5mA during operation, so it is important to have a reliable ground and a ground resistance of less than 10Ω, and that the conductivity of the PE ground conductor is the same as that of the phase conductor (using the same cross-sectional area).
The components in the drive contain heavy metals and must be disposed of as industrial waste after scrapping.
|
More on that
|
How does INVT apply the "four-to-three technical solution" to protect the dust removal fan
Converter dust removal is the key link of converter steelmaking, and the transmission equipment is the transportation artery of the dust removal fan system, so the stability of the transmission equipment plays a vital role in the normal operation of the blower.
|
|
The application of INVT AMC8300 controller on 6-axis multi-joint stomping
Six joints account for more than 70% of the mainstream robot, and from the appearance of it, it is mainly the difference in the length of the robotic arm. It is capable of automating operations in multiple occupations. For example: palletizing transfer, spraying, welding, etc.
A well-known watch foundry in Foshan used to demand a lot of workers to watch ...
|
|
INVT PV brought a luxury inverter lineup to the South American solar industry exhibition
From August 29th to 31st, InterSolar South America 2023, the largest solar industry exhibition in South America, was grandly held in Sao Paulo, Brazil, and INVT PV brought the most cutting-edge photovoltaic storage products and solutions to booth G1-84 in the Green Pavilion.
Thanks to the abundant sunlight ...
|
|
INVT assists the spindle merging machine to be efficient and energy-saving
The weaving process of woven fabrics:
Warping - sizing - parallel - drawing-in and reeding - adjusting machine - weaving - 淚 cloth
Whether it is in the requirements of low cost, or high quality and high efficiency, the parallel link is of great significance.
What is a parallel axis?
And shaft ...
|
|
INVT Electric Drive attended the electric vehicle charging equipment exhibition in Munich, Germany
From June 14th to 16th, the world-renowned Power2Drive Europe (P2D) exhibition in Munich, Germany was held in Messe München.
As Europe's largest energy industry platform, The Smarter E ...
|
|
INVT helps furniture manufacturing to create drilling tools
In terms of furniture production, because the production efficiency of the old-fashioned five-sided drill can not meet the production needs of customers, and the CNC six-sided drill can be clamped at one time, and solve the characteristics of the six-sided punching process of the plate, so the customer is ready to upgrade to the CNC six-sided drill.
The primary work of CNC six-sided drilling...
|
|
INVT GD270 series special inverter for fluid loads
INVT has newly released the GD270 special inverter for fan pumps, which includes a full range of book-based planning and compact structure
At present, low-carbon environmental protection has become a transformation trend in the industrial field. After years of skill accumulation and deepening market research and demand analysis, INVT has created a ...
|
|
INVT DA300 linear drive application in die bonder
LED die bonder is an automatic production equipment with high precision and high efficiency that absorbs LED wafers from LED wafer trays and mounts them onto PCBs to realize the automatic fitting of LED wafers and defective wafer detection functions. The customer of this project is a leading manufacturer of optoelectronic automation equipment.
|
|
INVT inverter OV code fault cause
OV1 accelerates the overvoltage
OV2 decelerates the overvoltage
OV3 constant velocity overvoltage
cause
The input voltage is abnormal;
There is a large energy return;
Missing brake components;
The energy brake function is not turned on.
measure
Check the input ...
|
|
INVT inverter overseas water supply industry case
In order to meet the diverse needs of the water supply market in various countries around the world, INVT has accumulated rich professional experience in water supply after years of professional cultivation in overseas markets.
In Greece: INVT GD200A inverter G/P integration advantages have been fully reflected in a factory. During the peak summer season, P...
|
|
INVT European crane solutions
The European-style crane frequency conversion speed regulation solution provides the lifting organization Goodrive350-19 closed-loop vector control method, and the large and small car organization Goodrive20-09 open-loop vector control method to ensure that the lifting organization is low-speed and fully loaded without slipping hooks, and the large and small cars organize smooth braking; Electric brake referral often ...
|
|
INVT integrated data center helps the informatization construction of Changzhou Experimental Primary School
With the continuous development of information skills and the increasing improvement of campus network construction, the construction of digital campus data center has become the key point of campus education informatization.
INVT Network Energy Skills Co., Ltd.'s data center solution has successfully settled in Changzhou Experimental Primary School, which has comprehensively improved the campus ...
|
|
Tianzhe Energy, Pinggao International Engineering and INVT Photovoltaic signed a cooperation agreement
On March 9, 2022, Tianzhe Power, Pinggao Group World Engineering Co., Ltd. (hereinafter referred to as "Pinggao Group World Engineering") and Shenzhen INVT Photovoltaic Technology Co., Ltd. (hereinafter referred to as "INVT PV") signed a strategic cooperation agreement on overseas shopping malls in Changzhou City, Jiangsu Province.
|
|
INVT PV was awarded the "Top 10 PCS Suppliers"
Recently, the "Second Work Conference of the First Session and the Annual Summit of Energy Storage" of Jiangsu Energy Storage Professional Association was held in Nanjing, Jiangsu, and the conference focused on the skill application, career development, policy trends and other aspects of the energy storage profession, and carried out a series of awards of "2022 Top Ten Brands of Energy Storage Profession in China" ...
|
|
INVT PV released the XG series
On July 23, the 17th World Solar Energy Use Conference and Exhibition (SUCE) 2022 was grandly opened at the Jinan World Convention and Exhibition Center. As a highly influential event in the photovoltaic industry, SUCE brought together outstanding photovoltaic companies from all over the country to participate in the exhibition, and attracted tens of thousands of visitors on the first day of the exhibition.
|
|
INVT VR showroom was launched
Recently, INVT VR exhibition hall was launched. In the context of digital media and the epidemic, INVT uses virtual reality technology to combine with classic ambitions to bring you a realistic scene experience through the VR exhibition hall.
Entering the VR showroom, you will be able to choose between full-screen, VR glasses and a view of the tour.
|
|
The application of INVT Goodrive350 inverter in CNC machining center
CNC machining center is a kind of CNC machine tool with a tool magazine and can actively replace tools, and can carry out a variety of machining operations on the workpiece within a certain range. It is now one of the CNC machine tools with the highest output value and the most widely used in the world. Its comprehensive processing capacity is strong, and the workpiece is clamped at one time.
|
|
INVT Goodrive800 inverter is used in the application of moving wheels to running
The wheelset used for the EMU is called the moving wheelset, which is the part of the EMU in contact with the rail, which accepts all the static and dynamic loads of the automatic car, and the driving and braking of the EMU also works through the wheelset, so the wheelset is an important part of the EMU.
In order to ensure safety and reliability, the assembly ...
|
|
INVT Ascendas iLegend series container data center was officially released
Application scenarios: It is especially suitable for data centers in special industries such as sports event venue construction, military camp deployment, oil exploration, marine scientific research, disaster recovery, emergency communications, etc., as well as data centers restricted by space, geographical environment, and environmental protection
Safe and reliable
IP55 ...
|
|
INVT improved the technical scheme of high-speed film gantry slitting machine
In a machinery factory in Shantou City, the customer optimized the machinery on the basis of the original machine, and INVT provided it with INVT Goodrive35-07+ Goodrive35 inverter + servo motor plan.
The touch screen and PLC are selected from the customer's original customers are familiar with the product, and the 485 pass ...
|
|
Contact
working hours
